| Sketching for Product Design and AEC/07 Finishing Touches/007 Solution_ Sketch an asymmetrical shampoo bottle with hatch lines and a cast shadow.mp4 |
119.1 MB |
| Sketching for Product Design and AEC/01 Introduction/001 Welcome.mp4 |
23.6 MB |
| Sketching for Product Design and AEC/01 Introduction/002 What you should know before watching this course-en.srt |
726 B |
| Sketching for Product Design and AEC/01 Introduction/002 What you should know before watching this course.mp4 |
7.5 MB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/001 Exploring why designers sketch-en.srt |
8 KB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/001 Exploring why designers sketch.mp4 |
27.8 MB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/002 Understanding why speed is critical to design sketching-en.srt |
7 KB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/002 Understanding why speed is critical to design sketching.mp4 |
22.7 MB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/003 Understanding the conversational nature of good sketching-en.srt |
8 KB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/003 Understanding the conversational nature of good sketching.mp4 |
22.5 MB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/004 Exploring the relationship between sketching and the computer-en.srt |
8 KB |
| Sketching for Product Design and AEC/02 Design Sketching Overview/004 Exploring the relationship between sketching and the computer.mp4 |
20 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/001 Sketching is creating the illusion of form in space-en.srt |
8 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/001 Sketching is creating the illusion of form in space.mp4 |
29.3 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/002 Sketching DNA_ Points_vertices lines_curves and planes_surfaces-en.srt |
7 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/002 Sketching DNA_ Points_vertices lines_curves and planes_surfaces.mp4 |
20.2 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/003 Drawing systems overview-en.srt |
12 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/003 Drawing systems overview.mp4 |
33.9 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/004 The interrelationship (connection) between the systems-en.srt |
8 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/004 The interrelationship (connection) between the systems.mp4 |
19.9 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/005 Challenge_ Sketch 2D geometric shapes and 3D forms-en.srt |
4 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/005 Challenge_ Sketch 2D geometric shapes and 3D forms.mp4 |
35.9 MB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/006 Solution_ Sketch 2D geometric shapes and 3D forms-en.srt |
10 KB |
| Sketching for Product Design and AEC/03 Design Sketching Fundamentals/006 Solution_ Sketch 2D geometric shapes and 3D forms.mp4 |
106.4 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/001 What is orthographic projection_-en.srt |
8 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/001 What is orthographic projection_.mp4 |
20.9 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/002 Exploring the nature of flatness in multiview projection-en.srt |
12 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/002 Exploring the nature of flatness in multiview projection.mp4 |
37.9 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/003 The power and dynamics of projection-en.srt |
13 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/003 The power and dynamics of projection.mp4 |
38.2 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/004 Bridging orthographic and perspective_ The rotated plan method-en.srt |
14 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/004 Bridging orthographic and perspective_ The rotated plan method.mp4 |
29.5 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/005 Challenge_ Sketch a simple 3-view orthographic of a wedge-en.srt |
3 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/005 Challenge_ Sketch a simple 3-view orthographic of a wedge.mp4 |
35.1 MB |
| Sketching for Product Design and AEC/04 Orthographic Projection/006 Solution_ Sketch a simple 3-view orthographic of a wedge-en.srt |
9 KB |
| Sketching for Product Design and AEC/04 Orthographic Projection/006 Solution_ Sketch a simple 3-view orthographic of a wedge.mp4 |
98.5 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/001 The DNA of 1-point perspective-en.srt |
10 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/001 The DNA of 1-point perspective.mp4 |
27.1 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/002 The DNA of 2-point perspective-en.srt |
10 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/002 The DNA of 2-point perspective.mp4 |
35.1 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/003 The mechanics of perspective (vantage points)-en.srt |
9 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/003 The mechanics of perspective (vantage points).mp4 |
28.6 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/004 Sketching inside the box_ The scaffolding analogy-en.srt |
12 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/004 Sketching inside the box_ The scaffolding analogy.mp4 |
30.8 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/005 Seeing and sketching-en.srt |
11 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/005 Seeing and sketching.mp4 |
28.1 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/006 Manipulating forms on the fly_ Altered or derived cubic forms-en.srt |
10 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/006 Manipulating forms on the fly_ Altered or derived cubic forms.mp4 |
25.9 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/007 Challenge_ Quickly sketch a series of basic and altered cubic forms-en.srt |
2 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/007 Challenge_ Quickly sketch a series of basic and altered cubic forms.mp4 |
23.9 MB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/008 Solution_ Quickly sketch a series of basic and altered cubic forms-en.srt |
10 KB |
| Sketching for Product Design and AEC/05 Perspective Projection_ Inside the Box/008 Solution_ Quickly sketch a series of basic and altered cubic forms.mp4 |
99.8 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/001 Minimizing the scaffolding for quicker sketching-en.srt |
10 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/001 Minimizing the scaffolding for quicker sketching.mp4 |
26.4 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/002 The power of centerlines and projection lines (projecting to vertices and center points)-en.srt |
10 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/002 The power of centerlines and projection lines (projecting to vertices and center points).mp4 |
24.4 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/003 Creating simple curved surfaces-en.srt |
10 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/003 Creating simple curved surfaces.mp4 |
26.5 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/004 The circle in perspective (the ellipse)-en.srt |
11 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/004 The circle in perspective (the ellipse).mp4 |
34.5 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/005 Creating curved surfaces-en.srt |
10 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/005 Creating curved surfaces.mp4 |
23.6 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/006 Creating compound curved surfaces_ The CAD analogy-en.srt |
10 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/006 Creating compound curved surfaces_ The CAD analogy.mp4 |
29.3 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/008 Challenge_ Sketch a thermos-en.srt |
3 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/008 Challenge_ Sketch a thermos.mp4 |
27.4 MB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/009 Solution_ Sketch a thermos-en.srt |
9 KB |
| Sketching for Product Design and AEC/06 Perspective Projection_ Outside the Box/009 Solution_ Sketch a thermos.mp4 |
88.1 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/001 The power of line_ Line weights for differentiation-en.srt |
11 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/001 The power of line_ Line weights for differentiation.mp4 |
26.1 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/002 The workhorses of sketching_-en.srt |
11 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/002 The workhorses of sketching_.mp4 |
26 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/003 Grounding forms_ Suggesting light shade and shadow with hatching-en.srt |
14 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/003 Grounding forms_ Suggesting light shade and shadow with hatching.mp4 |
36.1 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/004 Projecting shadows-en.srt |
12 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/004 Projecting shadows.mp4 |
37.2 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/005 The power of a frame_ Vignettes-en.srt |
9 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/005 The power of a frame_ Vignettes.mp4 |
24.5 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/006 Challenge_ Sketch an asymmetrical shampoo bottle with hatch lines and a cast shadow-en.srt |
2 KB |
| Sketching for Product Design and AEC/07 Finishing Touches/006 Challenge_ Sketch an asymmetrical shampoo bottle with hatch lines and a cast shadow.mp4 |
19.8 MB |
| Sketching for Product Design and AEC/07 Finishing Touches/007 Solution_ Sketch an asymmetrical shampoo bottle with hatch lines and a cast shadow-en.srt |
11 KB |
| Sketching for Product Design and AEC/01 Introduction/001 Welcome-en.srt |
2 KB |
| Sketching for Product Design and AEC/08 Putting It All Together/001 Sketching form in orthographic 2-view only_ Bottle concepts-en.srt |
10 KB |
| Sketching for Product Design and AEC/08 Putting It All Together/001 Sketching form in orthographic 2-view only_ Bottle concepts.mp4 |
21.5 MB |
| Sketching for Product Design and AEC/08 Putting It All Together/002 Transitioning from orthographic to perspective_ Sketching the complex form of a Pringle potato chip-en.srt |
12 KB |
| Sketching for Product Design and AEC/08 Putting It All Together/002 Transitioning from orthographic to perspective_ Sketching the complex form of a Pringle potato chip.mp4 |
27.4 MB |
| Sketching for Product Design and AEC/08 Putting It All Together/003 Sketching spatial designs in perspective-en.srt |
13 KB |
| Sketching for Product Design and AEC/08 Putting It All Together/003 Sketching spatial designs in perspective.mp4 |
37.6 MB |
| Sketching for Product Design and AEC/08 Putting It All Together/004 Exploring form through sketching_ Kitchen utensils-en.srt |
12 KB |
| Sketching for Product Design and AEC/08 Putting It All Together/004 Exploring form through sketching_ Kitchen utensils.mp4 |
32 MB |
| Sketching for Product Design and AEC/09 Conclusion/001 Next steps-en.srt |
7 KB |
| Sketching for Product Design and AEC/09 Conclusion/001 Next steps.mp4 |
69.5 MB |
Magnet link
