| Computer-Aided Design/1995 Volume 27/1/Common-tangents-to-planar-parametric-curves-a-geometric-solution.pdf |
854 KB |
| Computer-Aided Design/1995 Volume 27/1/Editorial-Board.pdf |
154 KB |
| Computer-Aided Design/1995 Volume 27/1/Editorial.pdf |
136 KB |
| Computer-Aided Design/1995 Volume 27/1/Multidimensional-curve-fitting-to-unorganized-data-points-by-nonlinear-minimization.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/1/Neural-network-approach-to-the-reconstruction-of-freeform-surfaces-for-reverse-engineering.pdf |
814 KB |
| Computer-Aided Design/1995 Volume 27/1/Performance-directed-compaction-for-VLSI-symbolic-layouts.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/1/Performing-Euler-angle-rotations-in-systems.pdf |
396 KB |
| Computer-Aided Design/1995 Volume 27/1/Rational-patches-on-quadric-surfaces.pdf |
1.6 MB |
| Computer-Aided Design/1995 Volume 27/1/Referees.pdf |
325 KB |
| Computer-Aided Design/1995 Volume 27/1/Review-of-statistical-approaches-to-tolerance-analysis.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/1/Tessellating-trimmed-surfaces.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/10/2-Phase-approach-to-global-tool-interference-avoidance-in-5-axis-machining.pdf |
1.7 MB |
| Computer-Aided Design/1995 Volume 27/10/Constructing-face-octrees-from-voxel-based-volume-representations.pdf |
904 KB |
| Computer-Aided Design/1995 Volume 27/10/Design-environment-for-the-design-of-mechanical-drive-units.pdf |
1.5 MB |
| Computer-Aided Design/1995 Volume 27/10/Deterministic-tolerance-synthesis-a-comparative-study.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/10/Multidimensional-set-theoretic-feature-recognition.pdf |
1.1 MB |
| Computer-Aided Design/1995 Volume 27/10/Smooth-piecewise-biquartic-surfaces-from-quadrilateral-control-polyhedra-with-isolated-n-sided-faces.pdf |
1.6 MB |
| Computer-Aided Design/1995 Volume 27/11/-an-object-oriented-nonmanifold-geometric-engine.pdf |
2.1 MB |
| Computer-Aided Design/1995 Volume 27/11/Calendar.pdf |
68 KB |
| Computer-Aided Design/1995 Volume 27/11/Least-squares-degree-reduction-of-Bezier-curves.pdf |
804 KB |
| Computer-Aided Design/1995 Volume 27/11/Offsetting-operations-via-closed-ball-approximation.pdf |
721 KB |
| Computer-Aided Design/1995 Volume 27/11/Relational-geometric-synthesis-Part-1--framework.pdf |
1.5 MB |
| Computer-Aided Design/1995 Volume 27/11/salary-and-employment-study.pdf |
1 MB |
| Computer-Aided Design/1995 Volume 27/11/Topological-method-for-loop-detection-of-surface-intersection-problems.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/11/Volume-decomposition-and-feature-recognition-part-1--polyhedral-objects.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/12/An-adaptive-method-for-smooth-surface-approximation-to-scattered-3D-points.pdf |
1.4 MB |
| Computer-Aided Design/1995 Volume 27/12/Biquartic-C1-surface-splines-over-irregular-meshes.pdf |
988 KB |
| Computer-Aided Design/1995 Volume 27/12/Calendar.pdf |
71 KB |
| Computer-Aided Design/1995 Volume 27/12/Five-axis-NC-cylindrical-milling-of-sculptured-surfaces.pdf |
843 KB |
| Computer-Aided Design/1995 Volume 27/12/Generating-Bezier-points-for-curves-and-surfaces-from-boundary-information.pdf |
1 MB |
| Computer-Aided Design/1995 Volume 27/12/Index-to-volume-27-(1995).pdf |
403 KB |
| Computer-Aided Design/1995 Volume 27/12/Offsetting-surface-boundaries-and-3-axis-gouge-free-surface-machining.pdf |
1.5 MB |
| Computer-Aided Design/1995 Volume 27/12/On-editability-of-feature-based-design.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/12/Performing-Euler-angle-rotations-in-systems.pdf |
132 KB |
| Computer-Aided Design/1995 Volume 27/2/Algorithm-for-degree-reduction-of-B-spline-curves.pdf |
899 KB |
| Computer-Aided Design/1995 Volume 27/2/Application-of-in-numerical-grid-generation.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/2/Calendar.pdf |
91 KB |
| Computer-Aided Design/1995 Volume 27/2/Dynamic-swung-surfaces-for-physics-based-shape-design.pdf |
1.7 MB |
| Computer-Aided Design/1995 Volume 27/2/Feature-based-models-for-anatomical-data-fitting.pdf |
935 KB |
| Computer-Aided Design/1995 Volume 27/2/Object-oriented-paradigm-for-curve-and-surface-design.pdf |
846 KB |
| Computer-Aided Design/1995 Volume 27/2/Planar-rational-B-spline-motions.pdf |
979 KB |
| Computer-Aided Design/1995 Volume 27/2/Special-Issue--theory-and-practice.pdf |
111 KB |
| Computer-Aided Design/1995 Volume 27/2/Unified-approach-to-curve-shape-modification.pdf |
923 KB |
| Computer-Aided Design/1995 Volume 27/3/Adaptive-sampling-and-mesh-generation.pdf |
749 KB |
| Computer-Aided Design/1995 Volume 27/3/Determining-two-minimal-circumscribing-discs-for-a-polygon.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/3/Hierarchical-geometric-constraints-for-building-design.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/3/Oriental-character-font-design-by-a-structured-composition-of-stroke-elements.pdf |
1.6 MB |
| Computer-Aided Design/1995 Volume 27/3/Product-modelling-using.pdf |
2.3 MB |
| Computer-Aided Design/1995 Volume 27/3/Quadrilateral-mesh-generation-in-polygonal-regions.pdf |
1.8 MB |
| Computer-Aided Design/1995 Volume 27/4/Calendar.pdf |
179 KB |
| Computer-Aided Design/1995 Volume 27/4/Curvature-continuous-connections-of-cones-and-cylinders.pdf |
791 KB |
| Computer-Aided Design/1995 Volume 27/4/Efficient-solid-modelling-via-sheet-modelling.pdf |
972 KB |
| Computer-Aided Design/1995 Volume 27/4/From-engineering-drawings-to-3D-models-are-we-ready-now.pdf |
1.7 MB |
| Computer-Aided Design/1995 Volume 27/4/Higher-order-Bezier-circles.pdf |
651 KB |
| Computer-Aided Design/1995 Volume 27/4/Interpolating-scattered-data-with-C2-surfaces.pdf |
708 KB |
| Computer-Aided Design/1995 Volume 27/4/Model-fabrication-using-surface-layout-projection.pdf |
879 KB |
| Computer-Aided Design/1995 Volume 27/4/Quasinonparametric-surfaces.pdf |
1.5 MB |
| Computer-Aided Design/1995 Volume 27/4/Towards-a-topology-for-computational-geometry.pdf |
940 KB |
| Computer-Aided Design/1995 Volume 27/5/Constraint-based-design-of-parts.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/5/Geometric-modelling-using-rational-Gaussian-curves-and-surfaces.pdf |
1.7 MB |
| Computer-Aided Design/1995 Volume 27/5/Interpolating-solid-orientations-with-circular-blending-quaternion-curves.pdf |
1.5 MB |
| Computer-Aided Design/1995 Volume 27/5/Pondering-on-discrete-smoothing-and-interpolation.pdf |
899 KB |
| Computer-Aided Design/1995 Volume 27/5/Statistical-verification-of-conformance-to-geometric-tolerance.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/5/Systematic-approach-to-analysing-the-manufacturability-of-machined-parts.pdf |
2.2 MB |
| Computer-Aided Design/1995 Volume 27/6/Bayesian-approach-for-extracting-and-identifying-features.pdf |
2.3 MB |
| Computer-Aided Design/1995 Volume 27/6/Calculating-areas-of-box-spline-surfaces.pdf |
642 KB |
| Computer-Aided Design/1995 Volume 27/6/Calendar.pdf |
152 KB |
| Computer-Aided Design/1995 Volume 27/6/Freeform-surface-region-optimization-for-3-axis-and-5-axis-milling.pdf |
660 KB |
| Computer-Aided Design/1995 Volume 27/6/G1-continuity-of-B-spline-surface-patches-in-reverse-engineering.pdf |
1.2 MB |
| Computer-Aided Design/1995 Volume 27/6/Geometric-and-computational-aspects-of-gravity-casting.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/6/Geometric-constraint-solver.pdf |
1.9 MB |
| Computer-Aided Design/1995 Volume 27/6/Use-of-graph-grammars-for-the-description-of-mechanical-parts.pdf |
3.3 MB |
| Computer-Aided Design/1995 Volume 27/7/A-platform-for-visualizing-curves-and-surfaces.pdf |
970 KB |
| Computer-Aided Design/1995 Volume 27/7/Calendar.pdf |
106 KB |
| Computer-Aided Design/1995 Volume 27/7/Direct-rendering-of-freeform-volumes.pdf |
794 KB |
| Computer-Aided Design/1995 Volume 27/7/Editorial-the-bicameral-mind-and.pdf |
197 KB |
| Computer-Aided Design/1995 Volume 27/7/Efficient-rendering-of-trimmed-nurbs-surfaces.pdf |
1.6 MB |
| Computer-Aided Design/1995 Volume 27/7/Simplified-curve-and-surface-interrogation-via-mathematical-packages-and-graphics-libraries-and-hardware.pdf |
1.9 MB |
| Computer-Aided Design/1995 Volume 27/7/Visualization-and-computation-of-curvature-behaviour-of-freeform-curves-and-surfaces.pdf |
879 KB |
| Computer-Aided Design/1995 Volume 27/8/Approximating-the-helix-with-rational-cubic-Bezier-curves.pdf |
683 KB |
| Computer-Aided Design/1995 Volume 27/8/Feature-modification-in-incremental-feature-generation.pdf |
1.1 MB |
| Computer-Aided Design/1995 Volume 27/8/How-not-to-get-a-paper-into-Computer-Aided-Design.pdf |
168 KB |
| Computer-Aided Design/1995 Volume 27/8/Quadric-shell-intersections.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/8/Refinement-of-3D-meshes-at-surface-intersections.pdf |
827 KB |
| Computer-Aided Design/1995 Volume 27/8/Representing-the-Voronoi-diagram-of-a-simple-polygon-using-rational-quadratic-Bezier-curves.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/8/Shading-fitting-a-smooth-intensity-surface.pdf |
1 MB |
| Computer-Aided Design/1995 Volume 27/8/Smoothing-curvature-and-torsion-with-spring-splines.pdf |
1.3 MB |
| Computer-Aided Design/1995 Volume 27/9/Computation-of-3D-skeletons-using-a-generalized-Delaunay-triangulation-technique.pdf |
2.2 MB |
| Computer-Aided Design/1995 Volume 27/9/Degree-reduction-of-Bezier-curves-by-uniform-approximation-with-endpoint-interpolation.pdf |
1.1 MB |
| Computer-Aided Design/1995 Volume 27/9/Integrating-feature-based-surface-design-with-freeform-deformation.pdf |
1.1 MB |
| Computer-Aided Design/1995 Volume 27/9/Parameterization-of-randomly-measured-points-for-least-squares-fitting-of-B-spline-curves-and-surfaces.pdf |
1.6 MB |
| Computer-Aided Design/1995 Volume 27/9/Towards-feature-attachment.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/1/A-collision-detection-method-with-applications-in-CAD-systems-for-the-apparel-industry.pdf |
601 KB |
| Computer-Aided Design/1996 Volume 28/1/A-conceptual-model-for-design-management.pdf |
2.4 MB |
| Computer-Aided Design/1996 Volume 28/1/An-improved-algorithm-for-automatic-fairing-of-non-uniform-parametric-cubic-splines.pdf |
821 KB |
| Computer-Aided Design/1996 Volume 28/1/Calendar.pdf |
70 KB |
| Computer-Aided Design/1996 Volume 28/1/Editorial-Board.pdf |
123 KB |
| Computer-Aided Design/1996 Volume 28/1/Error-bounded-piecewise-linear-approximation-of-freeform-surfaces.pdf |
776 KB |
| Computer-Aided Design/1996 Volume 28/1/Generic-naming-in-generative,-constraint-based-design.pdf |
1.2 MB |
| Computer-Aided Design/1996 Volume 28/1/Improving-the-geometry-design-of-cylindrical-cams-using-nonparametric-rational-B-splines.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/1/Letter-to-the-editors.pdf |
47 KB |
| Computer-Aided Design/1996 Volume 28/1/List-of-referees.pdf |
289 KB |
| Computer-Aided Design/1996 Volume 28/1/Partial-derivatives-of-Bezier-surfaces.pdf |
636 KB |
| Computer-Aided Design/1996 Volume 28/10/Calendar.pdf |
134 KB |
| Computer-Aided Design/1996 Volume 28/10/Computer-aided-design-using-the-method-of-cut-joint-kinematic-constraints.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/10/Generating-redesign-suggestions-to-reduce-setup-cost-a-step-towards-automated-redesign.pdf |
2.5 MB |
| Computer-Aided Design/1996 Volume 28/10/Geometric-reasoning-for-knowledge-based-parametric-design-using-graph-representation.pdf |
1.2 MB |
| Computer-Aided Design/1996 Volume 28/10/Geometric-reasoning-for-manufacturability-evaluation--application-to-powder-metallurgy.pdf |
1.6 MB |
| Computer-Aided Design/1996 Volume 28/10/Robust-interval-solid-modelling-Part-I-representations.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/10/Robust-interval-solid-modelling-Part-II-boundary-evaluation.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/11/Dimensional-verification-of-NC-machining-profiles-using-extended-quadtrees.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/12/A-pythagorean-hodograph-quintic-spiral.pdf |
786 KB |
| Computer-Aided Design/1996 Volume 28/12/An-optimization-approach-for-biarc-curve-fitting-of-B-spline-curves.pdf |
981 KB |
| Computer-Aided Design/1996 Volume 28/12/Approximate-G1-continuous-interpolation-of-a-rectangular-network-of-rational-cubic-curves.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/12/Calendar.pdf |
86 KB |
| Computer-Aided Design/1996 Volume 28/12/Cn-interpolation-on-smooth-manifolds-with-one-parameter-transformations.pdf |
668 KB |
| Computer-Aided Design/1996 Volume 28/12/Convexity-preserving-fairing.pdf |
1.3 MB |
| Computer-Aided Design/1996 Volume 28/12/Estimating-gradients-for-statistical-tolerance-synthesis.pdf |
1003 KB |
| Computer-Aided Design/1996 Volume 28/12/Index-to-volume-28-(1996).pdf |
477 KB |
| Computer-Aided Design/1996 Volume 28/12/Localization-and-comparison-of-two-free-form-surfaces.pdf |
789 KB |
| Computer-Aided Design/1996 Volume 28/12/Representation-of-functions-and-features-in-detail-design.pdf |
1.5 MB |
| Computer-Aided Design/1996 Volume 28/12/Smooth-surface-approximation-to-serial-cross-sections.pdf |
1.3 MB |
| Computer-Aided Design/1996 Volume 28/2/A-triangular-G1-patch-from-boundary-curves.pdf |
1.3 MB |
| Computer-Aided Design/1996 Volume 28/2/Choosing-nodes-in-parametric-blending-function-interpolation.pdf |
995 KB |
| Computer-Aided Design/1996 Volume 28/2/Constraint-based-parametric-conics-for-CAD.pdf |
990 KB |
| Computer-Aided Design/1996 Volume 28/2/Freehand-drawing-system-using-a-fuzzy-logic-concept.pdf |
1.2 MB |
| Computer-Aided Design/1996 Volume 28/2/Generating-assembly-and-machining-sequences-from-the-Face-to-Face-Composition-model.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/2/Properties-of-two-types-of-generalized-ball-curves.pdf |
666 KB |
| Computer-Aided Design/1996 Volume 28/2/Spectral-approximations-to-PDE-surfaces.pdf |
892 KB |
| Computer-Aided Design/1996 Volume 28/3/-supporting-innovative-mechanism-shape-design.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/3/A-logic-based-framework-for-shape-representation.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/3/Calendar.pdf |
77 KB |
| Computer-Aided Design/1996 Volume 28/3/Call-for-participation--HCI-International-'97-7th-International-Conference-on-Human-Computer-Interaction-jointly-with-13th-Symposium-on-Human-Interface-(Japan)-24-29-August-1997-San-Francisco,-CA,-USAn-In.pdf |
58 KB |
| Computer-Aided Design/1996 Volume 28/3/Modelling-multiple-views-of-design-objects-in-a-collaborative-environment.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/3/Modelling-with-constraints-theoretical-foundation-and-application.pdf |
1.9 MB |
| Computer-Aided Design/1996 Volume 28/3/Shared-understanding-in-computer-supported-collaborative-design.pdf |
1.5 MB |
| Computer-Aided Design/1996 Volume 28/3/Special-issue-Artificial-intelligence-in-computer-aided-design-Progress-and-prognosis.pdf |
224 KB |
| Computer-Aided Design/1996 Volume 28/3/The-development-of-an-integrated-and-intelligent--environment-using-logic-based-reasoning.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/4/A-review-of-rapid-prototyping-technologies-and-systems.pdf |
1.7 MB |
| Computer-Aided Design/1996 Volume 28/4/Algorithms-for-the-structural-diagnosis-and-decomposition-of-sparse,-underconstrained-design-systems.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/4/An-algorithm-reducing-3D-Boolean-operations-to-a-2D-problem-concepts-and-results.pdf |
1.3 MB |
| Computer-Aided Design/1996 Volume 28/4/Bilinear-matrix-forms-for-the-area-of-polygons.pdf |
513 KB |
| Computer-Aided Design/1996 Volume 28/4/Deforming-virtual-objects-interactively-in-accordance-with-an-elastic-model.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/4/Surface-design-using-cyclide-patches.pdf |
1.6 MB |
| Computer-Aided Design/1996 Volume 28/4/Visual-analysis-a-new-probabilistic-technique-to-determine-landscape-visibility.pdf |
1.3 MB |
| Computer-Aided Design/1996 Volume 28/5/Case-based-conceptual-design-information-server-for-concurrent-engineering.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/5/Database-infrastructure-for-supporting-engineering-design-histories.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/5/Design-search-under-probabilistic-specifications-using-genetic-algorithms.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/5/Discourse-model-for-collaborative-design.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/5/Feature-based-approach-for-set-up-minimization-of-process-design-from-product-design.pdf |
1.5 MB |
| Computer-Aided Design/1996 Volume 28/5/Integration-of-functional-and-feature-based-product-modelling----the-IMSGNOSIS-experience.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/5/Rapid-product-realization-from-detail-design.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/5/Reflections-on-a-concurrent-design-methodology-a-case-study-in-wearable-computer-design.pdf |
1.7 MB |
| Computer-Aided Design/1996 Volume 28/5/Special-issue-Computer-aided-concurrent-design.pdf |
97 KB |
| Computer-Aided Design/1996 Volume 28/6-7/A-representation-formalism-for-feature-based-design.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/A-tessellation-algorithm-for-the-representation-of-trimmed-surfaces-with-arbitrary-trimming-curves.pdf |
1.6 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Automated-design-to-cost-integrating-costing-into-the-design-decision.pdf |
2.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Box-skeletons-of-discrete-solids.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Calendar.pdf |
75 KB |
| Computer-Aided Design/1996 Volume 28/6-7/Determining-intersection-curves-between-surfaces-of-two-solids.pdf |
1.1 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Feature-decomposition-from-solid-models-for-automatic-flattening.pdf |
960 KB |
| Computer-Aided Design/1996 Volume 28/6-7/Formulations-of-composite-parametric-cubic-curves-and-circle-approximations.pdf |
720 KB |
| Computer-Aided Design/1996 Volume 28/6-7/Local-shape-control-for-free-form-solids-in-exact-CSG-representation.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Managing-integrity-in-design-information-flows.pdf |
1.9 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Robust-interval-algorithm-for-curve-intersections.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Smoothing-of-piecewise-linear-splines-and-the-application-to-piecewise-linear-fat-splines.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/6-7/Volume-decomposition-and-feature-recognition,-part-II-curved-objects.pdf |
2.1 MB |
| Computer-Aided Design/1996 Volume 28/8/Analysis-on-machined-feature-recognition-techniques-based-on-B-rep.pdf |
2 MB |
| Computer-Aided Design/1996 Volume 28/8/Announcements.pdf |
219 KB |
| Computer-Aided Design/1996 Volume 28/8/Calendar.pdf |
72 KB |
| Computer-Aided Design/1996 Volume 28/8/Distributed-boundary-representation-and-Boolean-operations-on-a-massively-parallel-computer.pdf |
1.9 MB |
| Computer-Aided Design/1996 Volume 28/8/Efficient-geometric-algorithms-for-workpiece-orientation-in-4--and-5-axis-NC-machining.pdf |
1.6 MB |
| Computer-Aided Design/1996 Volume 28/8/Incremental-and-localized-update-of-convex-decomposition-used-for-form-feature-recognition.pdf |
1.8 MB |
| Computer-Aided Design/1996 Volume 28/8/Optimization-based-reconstruction-of-a-3D-object-from-a-single-freehand-line-drawing.pdf |
1.7 MB |
| Computer-Aided Design/1996 Volume 28/8/Planar-curve-offset-based-on-circle-approximation.pdf |
1.7 MB |
| Computer-Aided Design/1996 Volume 28/8/Product-Data-Exchange--By-M-Susan-Bloor-and-J-Owen-UCL-Press-Limited,-London,-UK-(1995)-[pound-sign]35,-262-pp,-ISBN-1-85728-279-5.pdf |
152 KB |
| Computer-Aided Design/1996 Volume 28/8/The-NURBS-Book--By-Les-Piegl-and-Wayne-Tiller-Springer-Verlag,-Berlin--Heidelberg-(1995)-[pound-sign]60.50-(DM-129),-646-pp,-ISBN-3-54055-069-0.pdf |
194 KB |
| Computer-Aided Design/1996 Volume 28/9/Algorithm-for-approximate-skinning.pdf |
910 KB |
| Computer-Aided Design/1996 Volume 28/9/An-accurate-slicing-procedure-for-layered-manufacturing.pdf |
1.7 MB |
| Computer-Aided Design/1996 Volume 28/9/Assembly-modelling-by-geometric-constraint-satisfaction.pdf |
2.1 MB |
| Computer-Aided Design/1996 Volume 28/9/Automatic-mesh-generation-for-multiply-connected-planar-regions-based-on-mesh-grading-propagation.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/9/Calendar.pdf |
126 KB |
| Computer-Aided Design/1996 Volume 28/9/Fair-interpolation-and-approximation-of-B-splines-by-energy-minimization-and-points-insertion.pdf |
825 KB |
| Computer-Aided Design/1996 Volume 28/9/Geometric-design-of-functional-surfaces.pdf |
1.4 MB |
| Computer-Aided Design/1996 Volume 28/9/NC-verification-for-wire-EDM-using-an-R-map.pdf |
769 KB |
| Computer-Aided Design/1996 Volume 28/9/Statistical-tolerance-analysis-using-FRPDF-and-numerical-convolution.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/1/An-accelerated-triangulation-method-for-computing-the-skeletons-of-free-form-solid-models.pdf |
2.1 MB |
| Computer-Aided Design/1997 Volume 29/1/Calendar.pdf |
87 KB |
| Computer-Aided Design/1997 Volume 29/1/Comparison-of-discretization-algorithms-for-surfaces-with-application-to-numerically-controlled-machining.pdf |
1.5 MB |
| Computer-Aided Design/1997 Volume 29/1/Determining-fabrication-orientations-for-rapid-prototyping-with-Stereolithography-apparatus.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/1/Editorial-Board.pdf |
134 KB |
| Computer-Aided Design/1997 Volume 29/1/List-of-referees.pdf |
285 KB |
| Computer-Aided Design/1997 Volume 29/1/On-the-determination-of-starting-points-for-parametric-surface-intersections.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/1/Towards-multiprocessor-feature-recognition.pdf |
1.9 MB |
| Computer-Aided Design/1997 Volume 29/1/Using-Monte-Carlo-variance-reduction-in-statistical-tolerance-synthesis.pdf |
768 KB |
| Computer-Aided Design/1997 Volume 29/10/A-simple-visualization-tool-to-support-concurrent-engineering-design.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/10/CAD-method-for-industrial-assembly,-concurrent-design-of-products,-equipment-and-control-systems--edited-by-A.-Delchambre-John-Wiley-and-Sons.-Chichester,-1996,-[pound-sign]35,-279-pp,-ISBN-0-471-96261-9.pdf |
135 KB |
| Computer-Aided Design/1997 Volume 29/10/Calendar.pdf |
90 KB |
| Computer-Aided Design/1997 Volume 29/10/Design-of-plane-developments-of-doubly-curved-surfaces.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/10/Modeling-the-assembly-of-compliant,-non-ideal-parts.pdf |
876 KB |
| Computer-Aided Design/1997 Volume 29/10/Multi-sensory-user-interface-for-a-virtual-reality-based-computeraided-design-system.pdf |
1.9 MB |
| Computer-Aided Design/1997 Volume 29/10/Resolving-feature-interactions-in-3D-part-editing.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/11/A-robust-point-inclusion-algorithm-for-regions-bounded-by-parametric-curve-segments.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/11/An-integrated-system-for-NC-machining-of-multi-patch-surfaces.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/11/Approximation-of-measured-data-with-interval-B-splines.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/11/Automatic-extraction-of-form-features-for-casting.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/11/Calendar.pdf |
88 KB |
| Computer-Aided Design/1997 Volume 29/11/Optimal-circular-arc-interpolation-for-NC-tool-path-generation-in-curve-contour-manufacturing.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/11/The-general-B-spline-interpolation-method-and-its-application-to-the-modification-of-curves-and-surfaces.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/12/A-new-convex-hull-based-approach-to-evaluating-flatness-tolerance.pdf |
932 KB |
| Computer-Aided Design/1997 Volume 29/12/A-repository-for-design,-process-planning-and-assembly.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/12/A-virtual-prototyping-approach-to-product-disassembly-reasoning.pdf |
1.8 MB |
| Computer-Aided Design/1997 Volume 29/12/Author-index.pdf |
68 KB |
| Computer-Aided Design/1997 Volume 29/12/CAD-and-office-integration-OLE-for-design-and-modeling--a-new-technology-for-CA-software--By-Ulrich-Sendler-Springer-Verlag,-Berlin-Heidelberg,-1996,-162-pp,-[pound-sign]29.50-ISBN-3-540-60292-5-(hardcov.pdf |
118 KB |
| Computer-Aided Design/1997 Volume 29/12/Calendar.pdf |
74 KB |
| Computer-Aided Design/1997 Volume 29/12/Call-for-papers--Special-issue-of-the-journal-Computer-Aided-Design-Offsets,-sweeps,-and-Minkowski-sums.pdf |
105 KB |
| Computer-Aided Design/1997 Volume 29/12/Computing-planar-swept-polygons-under-translation.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/12/Die-cavity-pocketing-via-cutting-simulation.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/12/Dynamic-interfacing-of-applications-to-geometric-modeling-services-via-modeler-neutral-protocol.pdf |
1.8 MB |
| Computer-Aided Design/1997 Volume 29/12/Finding-the-maximum-turnable-state-for-millturn-parts.pdf |
1.9 MB |
| Computer-Aided Design/1997 Volume 29/12/Index-to-volume-29-(1997).pdf |
205 KB |
| Computer-Aided Design/1997 Volume 29/12/Keyword-index.pdf |
157 KB |
| Computer-Aided Design/1997 Volume 29/12/Selection-of-an-optimal-set-of-cutting-tool-sizes-for-212D-pocket-machining.pdf |
936 KB |
| Computer-Aided Design/1997 Volume 29/12/Solid-modeling-of-4-axis-wire-EDM-cut-geometry.pdf |
1018 KB |
| Computer-Aided Design/1997 Volume 29/2/A-mechanism-for-persistently-naming-topological-entities-in-history-based-parametric-solid-models.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/2/Assembly-sequencing-with-toleranced-parts.pdf |
2.2 MB |
| Computer-Aided Design/1997 Volume 29/2/Calendar.pdf |
102 KB |
| Computer-Aided Design/1997 Volume 29/2/Inferring-3D-models-from-freehand-sketches-and-constraints.pdf |
1.5 MB |
| Computer-Aided Design/1997 Volume 29/2/Kinematic-tolerance-analysis.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/2/Non-local-blending-of-boundary-models.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/2/Polyhedral-modelling-with-multiprecision-integer-arithmetic.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/2/Robust-algorithms-for-face-based-representations.pdf |
1.6 MB |
| Computer-Aided Design/1997 Volume 29/2/Special-issue-Solid-modelling.pdf |
143 KB |
| Computer-Aided Design/1997 Volume 29/3/A-cell-based-approach-for-generating-solid-objects-from-orthographic-projections.pdf |
1.2 MB |
| Computer-Aided Design/1997 Volume 29/3/A-classified-bibliography-of-literature-on-NC-milling-path-generation.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/3/Calendar.pdf |
98 KB |
| Computer-Aided Design/1997 Volume 29/3/Case-based-reasoning-in-design--By-Mary-Lou-Maher,-M.-Bala-Balachandran-and-Dong-Mei-Zhang-Lawrence-Erlbaum-Associates,-Inc.,-NJ,-USA(1995)-$19.95(in-cloth-$39.95),-246-pp,-ISBN-0-8058-1832-4(in-cloth-0-8.pdf |
151 KB |
| Computer-Aided Design/1997 Volume 29/3/Computer-aided-concurrent-integral-design--Edited-by-RF-Schmidt-and-M-Schmidt-Springer-Verlag,-Berlin-Heidelberg-(1996),-(DM32)-77-pp,-ISBN-3-540-60480-4.pdf |
217 KB |
| Computer-Aided Design/1997 Volume 29/3/Geometric-aspects-of-the-mouldability-of-parts.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/3/Nesting-of-two-dimensional-irregular-parts-using-a-shape-reasoning-heuristic.pdf |
1.9 MB |
| Computer-Aided Design/1997 Volume 29/3/Non-manifold-modelling-an-approach-based-on-spatial-subdivision.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/3/Smooth-interpolation-between-two-polylines-in-space.pdf |
851 KB |
| Computer-Aided Design/1997 Volume 29/4/Calendar.pdf |
98 KB |
| Computer-Aided Design/1997 Volume 29/4/High-level-model-acquisition-from-range-images.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/4/Reverse-engineering-of-geometric-models--an-introduction.pdf |
2.2 MB |
| Computer-Aided Design/1997 Volume 29/4/Segmentation-of-a-wrap-around-model-using-an-active-contour.pdf |
2.1 MB |
| Computer-Aided Design/1997 Volume 29/4/Special-issue-Reverse-engineering-of-geometric-models.pdf |
167 KB |
| Computer-Aided Design/1997 Volume 29/4/Static-polyhedron-simplification-using-error-measurements.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/4/Surface-reconstruction-from-points-to-splines.pdf |
1.1 MB |
| Computer-Aided Design/1997 Volume 29/4/Three-dimensional-object-reconstruction-from-two-dimensional-images.pdf |
789 KB |
| Computer-Aided Design/1997 Volume 29/5/Calendar.pdf |
83 KB |
| Computer-Aided Design/1997 Volume 29/5/Integration-of-feature-based-design-and-feature-recognition.pdf |
1.5 MB |
| Computer-Aided Design/1997 Volume 29/5/Matching-of-freeform-curves.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/5/Modelling-turned-components-with-non-axisymmetric-features.pdf |
2.2 MB |
| Computer-Aided Design/1997 Volume 29/5/Parametric-kinematic-tolerance-analysis-of-planar-mechanisms.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/5/Robust-computation-of-the-rotation-minimizing-frame-for-sweep-surface-modeling.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/5/Symbolic-operators-for-NURBS.pdf |
924 KB |
| Computer-Aided Design/1997 Volume 29/6/A-C2-triangular-patch-for-the-interpolation-of-functional-scattered-data.pdf |
601 KB |
| Computer-Aided Design/1997 Volume 29/6/Calendar.pdf |
136 KB |
| Computer-Aided Design/1997 Volume 29/6/Geometric-construction-for-setback-vertex-blending.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/6/Geometric-representation-of-the-swept-volume-using-Jacobian-rank-deficiency-conditions.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/6/Global-error-bounds-and-amelioration-of-sweep-surfaces.pdf |
886 KB |
| Computer-Aided Design/1997 Volume 29/6/Higher-order-Bezier-circles.pdf |
441 KB |
| Computer-Aided Design/1997 Volume 29/6/Manufacturing-feature-determination-and-extraction--Part-I-optimal-volume-segmentation.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/6/Moving-a-B-spline-surface-to-a-curve--a-trimmed-surface-matching-algorithm.pdf |
746 KB |
| Computer-Aided Design/1997 Volume 29/7/Admissible-tool-orientation-control-of-gouging-avoidance-for-5-axis-complex-surface-machining.pdf |
1.5 MB |
| Computer-Aided Design/1997 Volume 29/7/Calendar.pdf |
92 KB |
| Computer-Aided Design/1997 Volume 29/7/Case-based-design-for-assembly.pdf |
1.6 MB |
| Computer-Aided Design/1997 Volume 29/7/Energy-and-B-spline-interproximation.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/7/Manufacturing-feature-determination-and-extraction--part-II-a-heuristic-approach.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/7/Recognizing-D-shape-features-using-a-neural-network-and-heuristics.pdf |
2.2 MB |
| Computer-Aided Design/1997 Volume 29/8/Calendar.pdf |
97 KB |
| Computer-Aided Design/1997 Volume 29/8/Computer-aided-design--Ye,-X.,-Jackson,-T.R.-and-Patrikalakis,-N.M.,-Geometric-design-of-functional-surfaces.-1996,-28(9),-741-752.pdf |
53 KB |
| Computer-Aided Design/1997 Volume 29/8/Creation-of-concept-shape-designs-via-a-virtual-reality-interface.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/8/ISAAC-a-meta--system-for-virtual-environments.pdf |
962 KB |
| Computer-Aided Design/1997 Volume 29/8/Prototyping-and-design-for-assembly-analysis-using-multimodal-virtual-environments.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/8/Special-issue-Virtual-reality.pdf |
308 KB |
| Computer-Aided Design/1997 Volume 29/8/Virtual-assembly-using-virtual-reality-techniques.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/8/Virtual-reality-interfaces-for-feature-based-computer-aided-design-systems.pdf |
1.3 MB |
| Computer-Aided Design/1997 Volume 29/9/A-direct-method-for-the-automatic-discretization-of-3D-parametric-curves.pdf |
985 KB |
| Computer-Aided Design/1997 Volume 29/9/Analysis-and-synthesis-of-geometric-models-using-tree-structured-relations.pdf |
1012 KB |
| Computer-Aided Design/1997 Volume 29/9/C-space-approach-to-tool-path-generation-for-die-and-mould-machining.pdf |
1.7 MB |
| Computer-Aided Design/1997 Volume 29/9/Calendar.pdf |
94 KB |
| Computer-Aided Design/1997 Volume 29/9/On-estimating-the-feasible-solution-space-of-design.pdf |
900 KB |
| Computer-Aided Design/1997 Volume 29/9/Optimized-motion-planning--theory-and-implementation-by-Cherif-Ahrikencheikh-and-Ali-Seireg--John-Wiley-&-Sons-Inc.,-Chichester-(1994)-[pound-sign]58,-366-pp,-ISBN-0-471-01903-8.pdf |
118 KB |
| Computer-Aided Design/1997 Volume 29/9/Pythagorean-hodograph-quintic-transition-curves-of-monotone-curvature.pdf |
616 KB |
| Computer-Aided Design/1997 Volume 29/9/Robust-interval-algorithm-for-surface-intersections.pdf |
1.4 MB |
| Computer-Aided Design/1997 Volume 29/9/The-digital-architect--a-common-sense-guide-to-using-computer-technology-in-design-practice-by-Ken-Sanders--John-Wiley-&-Sons-Inc.,-Chichester-(1996)-[pound-sign]29.95,-470-pp,-ISBN-0-471-12165-7.pdf |
159 KB |
| Computer-Aided Design/1997 Volume 29/9/The-sweep-envelope-differential-equation-algorithm-and-its-application-to-NC-machining-verification.pdf |
1004 KB |
| Computer-Aided Design/1998 Volume 30/1/Application-of-evolutionary-programming-to-shape-design.pdf |
802 KB |
| Computer-Aided Design/1998 Volume 30/1/Automatic-generation-of-NC-cutter-path-from-massive-data-points.pdf |
1.5 MB |
| Computer-Aided Design/1998 Volume 30/1/Calendar.pdf |
63 KB |
| Computer-Aided Design/1998 Volume 30/1/CNC-machine-tool-interpolator-with-path-compensation-for-repeated-contour-machining.pdf |
877 KB |
| Computer-Aided Design/1998 Volume 30/1/Cubic-parametric-curves-of-given-tangent-and-curvature.pdf |
875 KB |
| Computer-Aided Design/1998 Volume 30/1/Decomposition-of-a-2D-assembly-drawing-into-3D-part-drawings.pdf |
992 KB |
| Computer-Aided Design/1998 Volume 30/1/Designing-digital-space-an-architect's-guide-to-virtual-reality--By-Daniela-Bertol-with-David-Foell-John-Wiley-&-Sons,-Inc.,-Chichester-(1997)-[pound-sign]32.50,-328-pp,-ISBN-0-471-14662-5.pdf |
137 KB |
| Computer-Aided Design/1998 Volume 30/1/Displacement-feature-modelling-for-conceptual-design.pdf |
1.2 MB |
| Computer-Aided Design/1998 Volume 30/1/Editorial-Board.pdf |
135 KB |
| Computer-Aided Design/1998 Volume 30/1/Fast-3D-solid-model-reconstruction-from-orthographic-views.pdf |
1.6 MB |
| Computer-Aided Design/1998 Volume 30/1/Geometry-based-triangulation-of-trimmed-NURBS-surfaces.pdf |
985 KB |
| Computer-Aided Design/1998 Volume 30/1/List-of-referees.pdf |
287 KB |
| Computer-Aided Design/1998 Volume 30/1/Solving-geometric-constraint-systems.-I.-A-global-propagation-approach.pdf |
1010 KB |
| Computer-Aided Design/1998 Volume 30/1/The-juggernaut-passes-another-milestone--thirty-years-of-Computer-aided-Design.pdf |
127 KB |
| Computer-Aided Design/1998 Volume 30/10/A-fast,-topology-manipulation-algorithm-for-compaction-of-meshfaceted-models.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/10/A-feature-based-shape-blending-technique-for-industrial-design.pdf |
561 KB |
| Computer-Aided Design/1998 Volume 30/10/A-simulated-annealing-based-algorithm-using-hierarchical-models-for-general-three-dimensional-component-layout.pdf |
1.5 MB |
| Computer-Aided Design/1998 Volume 30/10/Approximation-of-surfaces-by-cylinders.pdf |
737 KB |
| Computer-Aided Design/1998 Volume 30/10/Approximation-of-surfaces-of-revolution-by-developable-surfaces.pdf |
445 KB |
| Computer-Aided Design/1998 Volume 30/10/Automatic-interpolation-by-fair,-shape-preserving,-G2-space-curves.pdf |
677 KB |
| Computer-Aided Design/1998 Volume 30/10/Generation-of-3D-building-models-from-2D-architectural-plans.pdf |
4.6 MB |
| Computer-Aided Design/1998 Volume 30/10/Sweep-surface-reconstruction-from-three-dimensional-measured-data.pdf |
904 KB |
| Computer-Aided Design/1998 Volume 30/11/A-2-D-geometric-constraint-solver-using-DOF-based-graph-reduction.pdf |
598 KB |
| Computer-Aided Design/1998 Volume 30/11/A-strategy-for-the-construction-of-customized-design-libraries-for-CAD.pdf |
291 KB |
| Computer-Aided Design/1998 Volume 30/11/B-spline-surface-local-updating-with-unorganized-points.pdf |
866 KB |
| Computer-Aided Design/1998 Volume 30/11/CAD-and-the-product-master-model.pdf |
340 KB |
| Computer-Aided Design/1998 Volume 30/11/Intersecting-features-extraction-from-2D-orthographic-projections.pdf |
1.2 MB |
| Computer-Aided Design/1998 Volume 30/11/Mesh-simplification-with-smooth-surface-reconstruction.pdf |
522 KB |
| Computer-Aided Design/1998 Volume 30/11/Swift-and-stable-polygon-growth-and-broken-line-offset.pdf |
572 KB |
| Computer-Aided Design/1998 Volume 30/12/Data-enhancement-for-sharing-of-ship-design-models.pdf |
1.7 MB |
| Computer-Aided Design/1998 Volume 30/12/Design-with-objects-an-approach-to-object-oriented-design.pdf |
952 KB |
| Computer-Aided Design/1998 Volume 30/12/Ellipse-offset-approach-and-inclined-zig-zag-method-for-multi-axis-roughing-of-ruled-surface-pockets.pdf |
660 KB |
| Computer-Aided Design/1998 Volume 30/12/Removing-local-irregularities-of-NURBS-surfaces-by-modifying-highlight-lines.pdf |
478 KB |
| Computer-Aided Design/1998 Volume 30/13/A-cocktail-algorithm-for-planar-bezier-curve-intersections.pdf |
319 KB |
| Computer-Aided Design/1998 Volume 30/13/A-feature-based-approach-to-extracting-machining-features.pdf |
1001 KB |
| Computer-Aided Design/1998 Volume 30/13/An-integrated-approach-for-design-and-analysis-of-a-fluid-mixer.pdf |
822 KB |
| Computer-Aided Design/1998 Volume 30/13/Form-feature-recognition-using-convex-decomposition-results-presented-at-the-1997-ASME-CIE-Feature-Panel-Session.pdf |
437 KB |
| Computer-Aided Design/1998 Volume 30/13/Hint-based-reasoning-for-feature-recognition-status-report.pdf |
460 KB |
| Computer-Aided Design/1998 Volume 30/13/MMCs-and-PPCs-as-constructs-of-curvature-regions-for-form-feature-determination.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/13/Special-panel-session-for-feature-recognition-at-the-1997-ASME-Computers-in-Engineering-Conference.pdf |
275 KB |
| Computer-Aided Design/1998 Volume 30/13/Swept-volumes-void-and-boundary-identification.pdf |
450 KB |
| Computer-Aided Design/1998 Volume 30/13/The-Heriot-Watt-FeatureFinder-CIE97-results.pdf |
555 KB |
| Computer-Aided Design/1998 Volume 30/14/Approximate-development-of-trimmed-patches-for-surface-tessellation.pdf |
748 KB |
| Computer-Aided Design/1998 Volume 30/14/Bisector-curves-of-planar-rational-curves.pdf |
435 KB |
| Computer-Aided Design/1998 Volume 30/14/Book-Review.pdf |
53 KB |
| Computer-Aided Design/1998 Volume 30/14/Detection-of-loops-and-singularities-of-surface-intersections.pdf |
356 KB |
| Computer-Aided Design/1998 Volume 30/14/Index.pdf |
16 KB |
| Computer-Aided Design/1998 Volume 30/14/Index_1.pdf |
29 KB |
| Computer-Aided Design/1998 Volume 30/14/Modelling-generic-product-structures-in-STEP.pdf |
294 KB |
| Computer-Aided Design/1998 Volume 30/14/Polygon-offsetting-using-a-Voronoi-diagram-and-two-stacks.pdf |
370 KB |
| Computer-Aided Design/1998 Volume 30/14/Tool-profile-and-tool-path-calculation-for-free-form-thick-layered-fabrication.pdf |
2.1 MB |
| Computer-Aided Design/1998 Volume 30/2/An-adaptive-method-for-the-automatic-triangulation-of-3D-parametric-surfaces.pdf |
1.1 MB |
| Computer-Aided Design/1998 Volume 30/2/An-algorithm-for-reducing-tool-retractions-in-zigzag-pocket-machining.pdf |
879 KB |
| Computer-Aided Design/1998 Volume 30/2/Delayed-product-differentiation-a-design-and-manufacturing-perspective.pdf |
950 KB |
| Computer-Aided Design/1998 Volume 30/2/Knot-removal-surface-fairing-using-search-strategies.pdf |
1.1 MB |
| Computer-Aided Design/1998 Volume 30/2/Representation-and-interpretation-of-geometric-tolerances-for-polyhedral-objects--I.-Form-tolerances.pdf |
1.2 MB |
| Computer-Aided Design/1998 Volume 30/2/Solving-geometric-constraint-systems.-II.-A-symbolic-approach-and-decision-of-Rc-constructibility.pdf |
947 KB |
| Computer-Aided Design/1998 Volume 30/2/Verification-of-assemblability-between-toleranced-parts.pdf |
1.1 MB |
| Computer-Aided Design/1998 Volume 30/3/An-open-architecture-approach-to-kinematic-analysis-for-computer-aided-embodiment-design.pdf |
732 KB |
| Computer-Aided Design/1998 Volume 30/3/Announcements.pdf |
202 KB |
| Computer-Aided Design/1998 Volume 30/3/Calendar.pdf |
89 KB |
| Computer-Aided Design/1998 Volume 30/3/Cartesian-spline-interpolation-for-industrial-robots.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/3/Classification-of-all-self-motions-of-the-original-Stewart-Gough-platform.pdf |
1.1 MB |
| Computer-Aided Design/1998 Volume 30/3/Interpolation-schemes-for-rigid-body-motions.pdf |
1.4 MB |
| Computer-Aided Design/1998 Volume 30/3/Rational-motion-design--a-survey.pdf |
1.2 MB |
| Computer-Aided Design/1998 Volume 30/3/Real-time-motion-fairing-with-unit-quaternions.pdf |
836 KB |
| Computer-Aided Design/1998 Volume 30/3/Special-issue-Motion-design-and-kinematics.pdf |
136 KB |
| Computer-Aided Design/1998 Volume 30/4/A-data-front-end-for-layered-manufacturing.pdf |
1.6 MB |
| Computer-Aided Design/1998 Volume 30/4/Calendar.pdf |
86 KB |
| Computer-Aided Design/1998 Volume 30/4/Computing-constrained-minimum-width-annuli-of-point-sets.pdf |
1.3 MB |
| Computer-Aided Design/1998 Volume 30/4/Cone-visibility-decomposition-of-freeform-surface.pdf |
782 KB |
| Computer-Aided Design/1998 Volume 30/4/Filling-polyhedral-molds.pdf |
1.5 MB |
| Computer-Aided Design/1998 Volume 30/4/Interference-free-NC-machining-using-spatial-planning-and-Minkowski-operations.pdf |
1.2 MB |
| Computer-Aided Design/1998 Volume 30/4/Representation-and-management-of-feature-information-in-a-cellular-model.pdf |
1.3 MB |
| Computer-Aided Design/1998 Volume 30/4/Slicing-Minkowski-sums-for-satellite-antenna-layout.pdf |
1.4 MB |
| Computer-Aided Design/1998 Volume 30/4/Special-Issue-Computational-Geometry-and-Computer-Aided-Design-and-Manufacturing.pdf |
109 KB |
| Computer-Aided Design/1998 Volume 30/4/Voronoi-diagrams-and-offset-curves-of-curvilinear-polygons.pdf |
1.8 MB |
| Computer-Aided Design/1998 Volume 30/5/Automatic-identification-of-non-intersecting-machining-features-from-2D-CAD-input.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/5/Calculating-derivatives-in-statistical-tolerance-analysis.pdf |
997 KB |
| Computer-Aided Design/1998 Volume 30/5/Calendar07.pdf |
93 KB |
| Computer-Aided Design/1998 Volume 30/5/Current-research-in-the-conceptual-design-of-mechanical-products.pdf |
1.8 MB |
| Computer-Aided Design/1998 Volume 30/5/Design-led-component-selection.pdf |
1.6 MB |
| Computer-Aided Design/1998 Volume 30/5/DeWall-A-fast-divide-and-conquer-Delaunay-triangulation-algorithm-in-Ed.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/5/On-user-defined-features.pdf |
1.6 MB |
| Computer-Aided Design/1998 Volume 30/5/Part-orientation-and-build-cost-determination-in-layered-manufacturing.pdf |
1.9 MB |
| Computer-Aided Design/1998 Volume 30/6/Design-and-engineering-process-integration-through-a-multiple-view-intermediate-modeller-in-a-distributed-object-oriented-system-environment.pdf |
1.7 MB |
| Computer-Aided Design/1998 Volume 30/6/Distribution-modeling-and-evaluation-of-product-design-problems.pdf |
4.8 MB |
| Computer-Aided Design/1998 Volume 30/6/Editorial.pdf |
55 KB |
| Computer-Aided Design/1998 Volume 30/6/Geometric-shape-abstractions-for-internet-based-virtual-prototyping.pdf |
919 KB |
| Computer-Aided Design/1998 Volume 30/6/Managing-design-information-in-enterprise-wide-CAD-using-`smart-drawings'.pdf |
778 KB |
| Computer-Aided Design/1998 Volume 30/6/Modeler-independent-feature-recognition-in-a-distributed-environment.pdf |
497 KB |
| Computer-Aided Design/1998 Volume 30/6/NetBuilder-an-environment-for-integrating-tools-and-people.pdf |
950 KB |
| Computer-Aided Design/1998 Volume 30/7/An-object-oriented-representation-for-product-and-design-processes.pdf |
565 KB |
| Computer-Aided Design/1998 Volume 30/7/Approximation-of-developable-surfaces-with-cone-spline-surfaces.pdf |
2.1 MB |
| Computer-Aided Design/1998 Volume 30/7/Non-isoparametric-tool-path-planning-by-machining-strip-evaluation-for-5-axis-sculptured-surface-machining.pdf |
785 KB |
| Computer-Aided Design/1998 Volume 30/7/Planar-G2-curve-design-with-spiral-segments.pdf |
945 KB |
| Computer-Aided Design/1998 Volume 30/7/Recognition-of-rough-machining-features-in-2D-components.pdf |
627 KB |
| Computer-Aided Design/1998 Volume 30/7/Reconstruction-of-quadric-surface-solids-from-three-view-engineering-drawings.pdf |
900 KB |
| Computer-Aided Design/1998 Volume 30/7/Uncertainty-of-extreme-fit-evaluation-for-three-dimensional-measurement-data-analysis.pdf |
877 KB |
| Computer-Aided Design/1998 Volume 30/7/Using-dexels-to-make-hollow-models-for-rapid-prototyping.pdf |
701 KB |
| Computer-Aided Design/1998 Volume 30/8/A-geometric-algorithm-for-single-selective-disassembly-using-the-wave-propagation-abstraction.pdf |
1.4 MB |
| Computer-Aided Design/1998 Volume 30/8/A-new-approach-to-CNC-tool-path-generation.pdf |
862 KB |
| Computer-Aided Design/1998 Volume 30/8/A-variational-approach-to-progressive-lens-design.pdf |
1 MB |
| Computer-Aided Design/1998 Volume 30/8/Calendar.pdf |
105 KB |
| Computer-Aided Design/1998 Volume 30/8/Call-For-Papers-Solid-Modeling-'99-Fifth-ACM-Symposium-on-Solid-Modeling-and-Applications--9-11-June-1999,-Sheraton-Inn,-Ann-Arbor,-kfichigan,-USA.pdf |
140 KB |
| Computer-Aided Design/1998 Volume 30/8/Correct-series-expansion-of-implicit-hypersurfaces.pdf |
233 KB |
| Computer-Aided Design/1998 Volume 30/8/Efficient-and-reliable-methods-for-rounded-interval-arithmetic.pdf |
954 KB |
| Computer-Aided Design/1998 Volume 30/8/G1-arc-spline-approximation-of-quadratic-Bezier-curves.pdf |
615 KB |
| Computer-Aided Design/1998 Volume 30/8/Geometric-modeling.-Second-edition-by-Michael-E.-Mortenson--John-Wiley-and-Sons,-Inc.,-Chicester,-hardcover,-1997-[pound-sign]50,-523-pp,-ISBN-0-471-12957-7.pdf |
95 KB |
| Computer-Aided Design/1998 Volume 30/8/Issues-and-applications-of-case-based-reasoning-in-design,-edited-by-Mary-Lou-Maher-and-Pearl-Pu--Lawrence-Erlbaum-Associates,-Inc.,-New-Jersey,-1997,-342-pp,-ISBN-0-8058-2313-1,-$39.95.pdf |
236 KB |
| Computer-Aided Design/1998 Volume 30/8/Modeling-the-surface-swept-by-a-generalized-cutter-for-NC-verification.pdf |
766 KB |
| Computer-Aided Design/1998 Volume 30/8/Parametrically-deformed-free-form-surfaces-as-part-of-a-variational-model.pdf |
1.3 MB |
| Computer-Aided Design/1998 Volume 30/8/Three-axis-machining-of-compound-surfaces-using-flat-and-filleted-endmills.pdf |
886 KB |
| Computer-Aided Design/1998 Volume 30/8/Variable-feedrate-CNC-interpolators-for-constant-material-removal-rates-along-Pythagorean-hodograph-curves.pdf |
1.1 MB |
| Computer-Aided Design/1998 Volume 30/9/Automatic-identification-of-geometric-constraints-in-mechanical-assemblies.pdf |
1016 KB |
| Computer-Aided Design/1998 Volume 30/9/Automatic-recognition-of-interacting-machining-features-based-on-minimal-condition-subgraph.pdf |
713 KB |
| Computer-Aided Design/1998 Volume 30/9/Book-Review.pdf |
68 KB |
| Computer-Aided Design/1998 Volume 30/9/Delta-volume-decomposition-for-multi-sided-components.pdf |
1.6 MB |
| Computer-Aided Design/1998 Volume 30/9/Geometric-detail-suppression-by-the-Fourier-transform.pdf |
1.4 MB |
| Computer-Aided Design/1998 Volume 30/9/Parametric-kinematic-tolerance-analysis-of-general-planar-systems.pdf |
1013 KB |
| Computer-Aided Design/1998 Volume 30/9/Part-orientations-for-CMM-inspection-using-dimensioned-visibility-maps.pdf |
431 KB |
| Computer-Aided Design/1999 Volume 31/1/An-introduction-to-line-geometry-with-applications.pdf |
355 KB |
| Computer-Aided Design/1999 Volume 31/1/Cubic-Pythagorean-hodograph-spline-curves-and-applications-to-sweep-surface-modeling.pdf |
573 KB |
| Computer-Aided Design/1999 Volume 31/1/Editorial.pdf |
33 KB |
| Computer-Aided Design/1999 Volume 31/1/Medial-axis-transform-and-offset-curves-by-Minkowski-Pythagorean-hodograph-curves.pdf |
462 KB |
| Computer-Aided Design/1999 Volume 31/1/On-the-computational-geometry-of-ruled-surfaces.pdf |
428 KB |
| Computer-Aided Design/1999 Volume 31/1/Surface-interpolation-based-on-new-local-coordinates.pdf |
314 KB |
| Computer-Aided Design/1999 Volume 31/1/The-intersection-of-two-ruled-surfaces.pdf |
903 KB |
| Computer-Aided Design/1999 Volume 31/10/A-configuration-space-approach-to-the-automatic-design-of-multiple-state-mechanical-devices.pdf |
447 KB |
| Computer-Aided Design/1999 Volume 31/10/Information-modelling-for-made-to-order-virtual-enterprise-manufacturing-systems.pdf |
369 KB |
| Computer-Aided Design/1999 Volume 31/10/Planar-domain-simplification-for-modeling-virtual-solids-in-plant-and-machinery-layout.pdf |
487 KB |
| Computer-Aided Design/1999 Volume 31/11/A-framework-for-system-specification-using-chains-on-cell-complexes.pdf |
237 KB |
| Computer-Aided Design/1999 Volume 31/11/A-geometrical-product-specification-language-based-on-a-classification-of-symmetry-groups.pdf |
222 KB |
| Computer-Aided Design/1999 Volume 31/11/A-programming-approach-for-complex-animations.-Part-I.-Methodology.pdf |
507 KB |
| Computer-Aided Design/1999 Volume 31/11/A-programming-approach-for-complex-animations.-Part-II.-Reconstruction-of-a-real-disaster.pdf |
1.2 MB |
| Computer-Aided Design/1999 Volume 31/11/Geometric-languages-and-interfaces.pdf |
35 KB |
| Computer-Aided Design/1999 Volume 31/11/Set-combinations-of-the-mixed-dimension-cellular-objects-of-the-Djinn-API.pdf |
499 KB |
| Computer-Aided Design/1999 Volume 31/12/A-pair-wise-offset-algorithm-for-2D-point-sequence-curve.pdf |
1.6 MB |
| Computer-Aided Design/1999 Volume 31/12/A-shape-generating-approach-for-multi-axis-machining-G-buffer-models.pdf |
983 KB |
| Computer-Aided Design/1999 Volume 31/12/Bezier-representation-of-epitrochoids-and-hypotrochoids.pdf |
136 KB |
| Computer-Aided Design/1999 Volume 31/12/Feature-based-reverse-engineering-of-mannequin-for-garment-design.pdf |
362 KB |
| Computer-Aided Design/1999 Volume 31/12/Undercut-feature-recognition-in-an-injection-mould-design-system.pdf |
627 KB |
| Computer-Aided Design/1999 Volume 31/13/A-computer-aided-tolerancing-model-proportioned-assembly-clearance-volume.pdf |
748 KB |
| Computer-Aided Design/1999 Volume 31/13/A-unified-approach-to-verification-in-5-axis-freeform-milling-environments.pdf |
1000 KB |
| Computer-Aided Design/1999 Volume 31/13/An-exact-minimum-zone-solution-for-sphericity-evaluation.pdf |
133 KB |
| Computer-Aided Design/1999 Volume 31/13/Erratum-to-Multiple-sweeping-using-the-Denavit-Hartenberg-representation-method.pdf |
42 KB |
| Computer-Aided Design/1999 Volume 31/13/Evaluation-of-straightness-and-flatness-error-using-computational-geometric-techniques.pdf |
363 KB |
| Computer-Aided Design/1999 Volume 31/13/Shape-blending-of-curves-and-surfaces-with-geometric-continuity.pdf |
496 KB |
| Computer-Aided Design/1999 Volume 31/14/A-generic-approach-to-recognising-isolated,-nested-and-interacting-features-from-2D-drawings.pdf |
1 MB |
| Computer-Aided Design/1999 Volume 31/14/A-note-on-approximation-of-discrete-data-by-G1-arc-splines.pdf |
196 KB |
| Computer-Aided Design/1999 Volume 31/14/Geometric-constraint-satisfaction-using-optimization-methods.pdf |
337 KB |
| Computer-Aided Design/1999 Volume 31/14/Index.pdf |
8 KB |
| Computer-Aided Design/1999 Volume 31/14/Index_1.pdf |
10 KB |
| Computer-Aided Design/1999 Volume 31/14/Planar-G2-transition-between-two-circles-with-a-fair-cubic-Bezier-curve.pdf |
240 KB |
| Computer-Aided Design/1999 Volume 31/14/The-crossing-function-and-its-application-to-zig-zag-tool-paths.pdf |
490 KB |
| Computer-Aided Design/1999 Volume 31/2/Computing-offsets-of-NURBS-curves-and-surfaces.pdf |
836 KB |
| Computer-Aided Design/1999 Volume 31/2/Custom-Cut-a-customizable-feature-recognizer.pdf |
2.2 MB |
| Computer-Aided Design/1999 Volume 31/2/Generating-resource-based-flexible-form-manufacturing-features-through-objective-driven-clustering.pdf |
476 KB |
| Computer-Aided Design/1999 Volume 31/2/Knowledge-base-and-database-representation-for-intelligent-concurrent-design.pdf |
1019 KB |
| Computer-Aided Design/1999 Volume 31/2/One-sided-arc-approximation-of-B-spline-curves-for-interference-free-offsetting.pdf |
305 KB |
| Computer-Aided Design/1999 Volume 31/2/Quadric-surface-extraction-using-genetic-algorithms.pdf |
578 KB |
| Computer-Aided Design/1999 Volume 31/3/A-computing-strategy-for-applications-involving-offsets,-sweeps,-and-Minkowski-operations.pdf |
646 KB |
| Computer-Aided Design/1999 Volume 31/3/An-overview-of-offset-curves-and-surfaces.pdf |
228 KB |
| Computer-Aided Design/1999 Volume 31/3/Collision-free-3-axis-milling-and-selection-of-cutting-tools.pdf |
1.2 MB |
| Computer-Aided Design/1999 Volume 31/3/Offsets,-sweeps,-and-Minkowski-sums.pdf |
33 KB |
| Computer-Aided Design/1999 Volume 31/3/Rational-motion-based-surface-generation.pdf |
609 KB |
| Computer-Aided Design/1999 Volume 31/3/The-dual-of-sweep.pdf |
1 MB |
| Computer-Aided Design/1999 Volume 31/3/Trimming-swept-volumes.pdf |
598 KB |
| Computer-Aided Design/1999 Volume 31/4/An-adaptive-tool-path-generation-algorithm-for-precision-surface-machining.pdf |
346 KB |
| Computer-Aided Design/1999 Volume 31/4/Erratum-to-Bentz-K.-Technical-Note.-Correct-series-expansion-of-implicit-hypersurfaces.-Computer-Aided-Design-1998;30(8)667-669.pdf |
39 KB |
| Computer-Aided Design/1999 Volume 31/4/Genetic-algorithms-for-optimized-re-triangulation-in-the-context-of-reverse-engineering.pdf |
654 KB |
| Computer-Aided Design/1999 Volume 31/4/Representation-and-interpretation-of-geometric-tolerances-for-polyhedral-objects.-II.-Size,-orientation-and-position-tolerances.pdf |
651 KB |
| Computer-Aided Design/1999 Volume 31/4/Shapes-with-offsets-of-nearly-constant-surface-area.pdf |
223 KB |
| Computer-Aided Design/1999 Volume 31/4/The-flattening-of-triangulated-surfaces-incorporating-darts-and-gussets.pdf |
2.9 MB |
| Computer-Aided Design/1999 Volume 31/5/A-topology-construction-from-line-drawings-using-a-uniform-plane-subdivision-technique.pdf |
1.3 MB |
| Computer-Aided Design/1999 Volume 31/5/Freehand-drawing-system-using-a-fuzzy-logic-concept.pdf |
54 KB |
| Computer-Aided Design/1999 Volume 31/5/Interference-detection-and-optimal-tool-selection-in-3-axis-NC-machining-of-free-form-surfaces.pdf |
1.3 MB |
| Computer-Aided Design/1999 Volume 31/5/Region-based-adaptive-slicing.pdf |
758 KB |
| Computer-Aided Design/1999 Volume 31/5/The-speed-controlled-interpolator-for-machining-parametric-curves.pdf |
242 KB |
| Computer-Aided Design/1999 Volume 31/6/A-dual-geometry--topology-constraint-approach-for-determination-of-pseudo-swept-shapes-as-applied-to-hexahedral-mesh-generation.pdf |
517 KB |
| Computer-Aided Design/1999 Volume 31/6/Computation-of-a-geometric-model-of-a-machined-part-from-its-NC-machining-programs.pdf |
485 KB |
| Computer-Aided Design/1999 Volume 31/6/Object-reconstruction-by-incorporating-geometric-constraints-in-reverse-engineering.pdf |
2.4 MB |
| Computer-Aided Design/1999 Volume 31/7/CAD-based-path-planning-for-3-D-line-laser-scanning.pdf |
711 KB |
| Computer-Aided Design/1999 Volume 31/7/Meshfree-simulation-of-deforming-domains.pdf |
1.8 MB |
| Computer-Aided Design/1999 Volume 31/7/Segmentation-of-measured-point-data-using-a-parametric-quadric-surface-approximation.pdf |
1.5 MB |
| Computer-Aided Design/1999 Volume 31/7/Synthesis-of-consolidated-data-schema-for-engineering-analysis-from-multiple-STEP-application-protocols.pdf |
952 KB |
| Computer-Aided Design/1999 Volume 31/8/Data-reduction-of-polygonal-curves-using-B-splines.pdf |
374 KB |
| Computer-Aided Design/1999 Volume 31/8/Seed-growing-segmentation-of-3-D-surfaces-from-CT-contour-data.pdf |
3 MB |
| Computer-Aided Design/1999 Volume 31/8/Shape-error-evaluation-method-of-free-form-surfaces.pdf |
658 KB |
| Computer-Aided Design/1999 Volume 31/8/Texture-prediction-of-milled-surfaces-using-texture-superposition-method.pdf |
739 KB |
| Computer-Aided Design/1999 Volume 31/9/A-framework-for-object-modeling.pdf |
737 KB |
| Computer-Aided Design/1999 Volume 31/9/Efficient-cutter-path-planning-for-five-axis-surface-machining-with-a-flat-end-cutter.pdf |
517 KB |
| Computer-Aided Design/1999 Volume 31/9/Multiple-sweeping-using-the-Denavit-Hartenberg-representation-method.pdf |
1.2 MB |
| Computer-Aided Design/1999 Volume 31/9/Toward-the-uniform-coverage-of-surfaces-by-scanning-curves.pdf |
540 KB |
| Computer-Aided Design/2000 Volume 32/1/A-semantic-feature-language-for-sculptured-object-modelling.pdf |
551 KB |
| Computer-Aided Design/2000 Volume 32/1/DO-IT-deformable-object-as-input-tool-for-3-D-geometric-operation.pdf |
1.9 MB |
| Computer-Aided Design/2000 Volume 32/1/Multi-level-models-for-reverse-engineering-and-rapid-prototyping-in-remote-CAD-systems.pdf |
1.1 MB |
| Computer-Aided Design/2000 Volume 32/1/New-directions-for-the-millennium.pdf |
38 KB |
| Computer-Aided Design/2000 Volume 32/1/Separating-topology-and-geometry-in-space-planning.pdf |
2 MB |
| Computer-Aided Design/2000 Volume 32/1/Tool-path-planning-for-direction-parallel-area-milling.pdf |
647 KB |
| Computer-Aided Design/2000 Volume 32/10/An-automated-design-and-assembly-of-interference-free-modular-fixture-setup.pdf |
1.3 MB |
| Computer-Aided Design/2000 Volume 32/10/Degree-reduction-of-interval-Bezier-curves.pdf |
1.3 MB |
| Computer-Aided Design/2000 Volume 32/10/Erratum-to-'Representation-and-interpretation-of-geometric-tolerances-for-polyhedral-objects.-II.-Size,-orientation-and-position-tolerances'-by-U.-Roy-and-B.-Li.-Computer-Aided-Design-31(4),-273-285-(199.pdf |
39 KB |
| Computer-Aided Design/2000 Volume 32/10/Letter-to-the-editor-an-algorithm-for-reducing-tool-retractions-in-zigzag-pocket-machining.pdf |
126 KB |
| Computer-Aided Design/2000 Volume 32/10/On-minimum-traceable-partitioning-and-minimum-tool-retractions.pdf |
151 KB |
| Computer-Aided Design/2000 Volume 32/10/Painless-introduction-to-geometric-concepts-and-tools-in-computer-graphics-and-CAD-Applied-geometry-for-computer-graphics-and-CAD;-D.-Marsh;-Springer,-London,-1999,-288-pages,-ISBN-1-85233-080-5,-[pound-.pdf |
109 KB |
| Computer-Aided Design/2000 Volume 32/10/Recognition-of-machining-features-and-feature-topologies-from-NC-programs.pdf |
1.3 MB |
| Computer-Aided Design/2000 Volume 32/10/Two-stage-cutter-path-scheduling-for-ball-end-milling-of-concave-and-wall-bounded-surfaces.pdf |
358 KB |
| Computer-Aided Design/2000 Volume 32/11/Efficient-and-exact-manipulation-of-algebraic-points-and-curves.pdf |
557 KB |
| Computer-Aided Design/2000 Volume 32/11/Error-propagation-in-geometric-constructions.pdf |
430 KB |
| Computer-Aided Design/2000 Volume 32/11/How-trivial-are-reliable-box-plane-intersections.pdf |
131 KB |
| Computer-Aided Design/2000 Volume 32/11/Robust-arithmetic-for-multivariate-Bernstein-form-polynomials.pdf |
255 KB |
| Computer-Aided Design/2000 Volume 32/11/Robustness-issues-in-geometric-and-solid-modeling.pdf |
32 KB |
| Computer-Aided Design/2000 Volume 32/11/Satisfying-coplanarity-constraints-on-points-sets-in-three-dimensions-with-finite-precision-arithmetic.pdf |
804 KB |
| Computer-Aided Design/2000 Volume 32/12/Automatic-propagation-of-feature-modification-across-domains.pdf |
1.9 MB |
| Computer-Aided Design/2000 Volume 32/12/Multiple-material-objects-from-CAD-representation-to-data-format-for-rapid-prototyping.pdf |
343 KB |
| Computer-Aided Design/2000 Volume 32/12/On-the-Rendering-of-Large-Polygon-Models-Real-Time-Rendering;-T.-Moller,-E.-Haines;-AK-Peters,-Natick,-MA,-USA,-1999,-482-pages,-ISBN-1-568-81101-2,-US$49.95.pdf |
45 KB |
| Computer-Aided Design/2000 Volume 32/12/Public-key-watermarking-for-authentication-of-CSG-models.pdf |
324 KB |
| Computer-Aided Design/2000 Volume 32/12/Reliable-line-segment-intersection-testing.pdf |
252 KB |
| Computer-Aided Design/2000 Volume 32/12/Representational-validity-of-boundary-representation-models.pdf |
215 KB |
| Computer-Aided Design/2000 Volume 32/13/3D-mesh-geometry-filtering-algorithms-for-progressive-transmission-schemes.pdf |
7.4 MB |
| Computer-Aided Design/2000 Volume 32/13/Dynamic-view-dependent-multiresolution-on-a-client-server-architecture.pdf |
1.1 MB |
| Computer-Aided Design/2000 Volume 32/13/Efficiently-computing-and-updating-triangle-strips-for-real-time-rendering.pdf |
763 KB |
| Computer-Aided Design/2000 Volume 32/13/LOD-visibility-culling-and-occluder-synthesis.pdf |
613 KB |
| Computer-Aided Design/2000 Volume 32/13/Multiresolution-geometric-models.pdf |
37 KB |
| Computer-Aided Design/2000 Volume 32/13/Time-critical-multiresolution-rendering-of-large-complex-models.pdf |
2.4 MB |
| Computer-Aided Design/2000 Volume 32/14/A-feature-based-approach-towards-an-integrated-product-model-including-conceptual-design-information.pdf |
508 KB |
| Computer-Aided Design/2000 Volume 32/14/A-graph-theoretic-approach-to-conceptual-design-with-functional-perspectives.pdf |
311 KB |
| Computer-Aided Design/2000 Volume 32/14/Conceptual-design-issues-and-challenges.pdf |
53 KB |
| Computer-Aided Design/2000 Volume 32/14/Constraint-based-functional-design-verification-for-conceptual-design.pdf |
240 KB |
| Computer-Aided Design/2000 Volume 32/14/From-on-line-sketching-to-2D-and-3D-geometry-a-system-based-on-fuzzy-knowledge.pdf |
1.6 MB |
| Computer-Aided Design/2000 Volume 32/14/Index.pdf |
17 KB |
| Computer-Aided Design/2000 Volume 32/14/Index_1.pdf |
17 KB |
| Computer-Aided Design/2000 Volume 32/2/Agent-based-workflow-management-in-collaborative-product-development-on-the-Internet.pdf |
549 KB |
| Computer-Aided Design/2000 Volume 32/2/Integrated-design-in-a-service-marketplace.pdf |
595 KB |
| Computer-Aided Design/2000 Volume 32/2/Lessons-learned-developing-protocols-for-the-industrial-virtual-enterprise.pdf |
168 KB |
| Computer-Aided Design/2000 Volume 32/2/Managing-digital-libraries-for-computer-aided-design.pdf |
941 KB |
| Computer-Aided Design/2000 Volume 32/2/Requirements-and-strategies-for-the-retention-of-automotive-product-data.pdf |
181 KB |
| Computer-Aided Design/2000 Volume 32/2/Some-aspects-of-product-and-process-development-in-the-21st-Century.-Part-I.pdf |
36 KB |
| Computer-Aided Design/2000 Volume 32/2/The-Enterprise-Web-portal-for-life-cycle-support.pdf |
1.2 MB |
| Computer-Aided Design/2000 Volume 32/2/Virtual-situation-rooms-connecting-people-across-enterprises-for-supply-chain-agility.pdf |
1009 KB |
| Computer-Aided Design/2000 Volume 32/3/Guide-surface-based-tool-path-generation-in-3-axis-milling-an-extension-of-the-guide-plane-method.pdf |
394 KB |
| Computer-Aided Design/2000 Volume 32/3/Layered-manufacturing-of-surfaces-with-open-contours-using-localized-wall-thickening.pdf |
1.8 MB |
| Computer-Aided Design/2000 Volume 32/3/Principles-of-CADCAMCAE-Systems;-Kunwoo-Lee;-Addison-Wesley,-Reading,-MA,-1999,-582-pages,-ISBN-0-201-38036-6-(US$-91.00).pdf |
134 KB |
| Computer-Aided Design/2000 Volume 32/3/Semantic-feature-modelling.pdf |
1.4 MB |
| Computer-Aided Design/2000 Volume 32/4/A-graphic-view-of-linear-algebra-The-geometry-toolbox-for-graphics-and-modeling;-G.-Farin,-D.-Hansford-(Eds.);-AK-Peters,-Natick,-MA,-288-pages,-ISBN-1-56881-074-1,-[pound-sign]34.pdf |
46 KB |
| Computer-Aided Design/2000 Volume 32/4/A-method-for-approximate-NURBS-curve-compatibility-based-on-multiple-curve-refitting.pdf |
496 KB |
| Computer-Aided Design/2000 Volume 32/4/Bisection-algorithms-for-approximating-quadratic-Bezier-curves-by-G1-arc-splines.pdf |
293 KB |
| Computer-Aided Design/2000 Volume 32/4/Generating-5-axis-NC-roughing-paths-directly-from-a-tessellated-representation.pdf |
802 KB |
| Computer-Aided Design/2000 Volume 32/4/Incremental-tessellation-of-trimmed-parametric-surfaces.pdf |
1.8 MB |
| Computer-Aided Design/2000 Volume 32/5-6/Automatic-generation-of-system-level-dynamic-equations-for-mechatronic-systems.pdf |
506 KB |
| Computer-Aided Design/2000 Volume 32/5-6/C-FAR,-change-favorable-representation.pdf |
785 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Coding-topological-structure-of-3D-CAD-models.pdf |
549 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Communication-computer-aided-engineering-in-the-next-millennium.pdf |
147 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Framework-for-integrated-mechanical-design-automation.pdf |
995 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Knowledge-based-product-development-using-XML-and-KCs.pdf |
334 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Knowledge-based-product-life-cycle-systems-principles-of-integration-of-KBE-and-C3P.pdf |
922 KB |
| Computer-Aided Design/2000 Volume 32/5-6/Morphological-analysis-for-product-design.pdf |
1 MB |
| Computer-Aided Design/2000 Volume 32/5-6/Some-aspects-of-product-and-process-development-in-the-21st-Century.-Part-II.pdf |
53 KB |
| Computer-Aided Design/2000 Volume 32/7/'A-framework-for-system-specification-using-chains-on-cell-complexes'-by-R.-Egli-and-N.F.-Stewart-[Computer-Aided-Design-31(11),-669-681].pdf |
28 KB |
| Computer-Aided Design/2000 Volume 32/7/3D-automatic-remeshing-applied-to-model-modification.pdf |
1.4 MB |
| Computer-Aided Design/2000 Volume 32/7/A-framework-for-system-specification-using-chains-on-cell-complexes.pdf |
247 KB |
| Computer-Aided Design/2000 Volume 32/7/CFACA-component-framework-for-feature-based-design-and-process-planning.pdf |
205 KB |
| Computer-Aided Design/2000 Volume 32/7/Distributed-maintenance-of-multiple-product-views.pdf |
312 KB |
| Computer-Aided Design/2000 Volume 32/7/On-local-gouging-in-five-axis-sculptured-surface-machining-using-flat-end-tools.pdf |
1 MB |
| Computer-Aided Design/2000 Volume 32/8-9/A-novel-FEM-based-dynamic-framework-for-subdivision-surfaces.pdf |
2.4 MB |
| Computer-Aided Design/2000 Volume 32/8-9/Consistent-updates-in-dual-representation-systems.pdf |
353 KB |
| Computer-Aided Design/2000 Volume 32/8-9/Fast-volume-preserving-free-form-deformation-using-multi-level-optimization.pdf |
1.4 MB |
| Computer-Aided Design/2000 Volume 32/8-9/Grow-&-fold-compressing-the-connectivity-of-tetrahedral-meshes.pdf |
361 KB |
| Computer-Aided Design/2000 Volume 32/8-9/Integrated-mechanically-based-CAE-system-using-B-Spline-finite-elements.pdf |
824 KB |
| Computer-Aided Design/2000 Volume 32/8-9/Integrated-solid-modeller-based-solutions-for-machining.pdf |
364 KB |
| Computer-Aided Design/2000 Volume 32/8-9/Special-Issue-on-Solid-Modeling-'99.pdf |
40 KB |
| Computer-Aided Design/2000 Volume 32/8-9/Three-dimensional-freeform-sculpting-via-zero-sets-of-scalar-trivariate-functions.pdf |
1.3 MB |
| Computer-Aided Design/2001 Volume 33/1/A-constant-feed-and-reduced-angular-acceleration-interpolation-algorithm-for-multi-axis-machining.pdf |
1.1 MB |
| Computer-Aided Design/2001 Volume 33/1/A-process-planning-method-for-improving-build-performance-in-stereolithography.pdf |
589 KB |
| Computer-Aided Design/2001 Volume 33/1/Analysis-of-difference-fairing-based-on-DFT-filter.pdf |
645 KB |
| Computer-Aided Design/2001 Volume 33/1/Constrained-scaling-of-trimmed-NURBS-surfaces-based-on-fix-and-stretch-approach.pdf |
1.2 MB |
| Computer-Aided Design/2001 Volume 33/1/Derivation-of-a-standard-set-of-geometric-constraints-for-parametric-modeling-and-data-exchange.pdf |
250 KB |
| Computer-Aided Design/2001 Volume 33/1/Geometric-Constraint-Solving-A-Growing-Field-Geometric-Constraint-Solving-and-Applications,-B.-Bruderlin-and-D.-Roller-(Eds.);-Springer,-Berlin,-1998,-Hardbound,-304-pages,-ISBN-3-540-64416-4,-[pound-sign.pdf |
140 KB |
| Computer-Aided Design/2001 Volume 33/1/On-swept-volume-formulations-implicit-surfaces.pdf |
1.3 MB |
| Computer-Aided Design/2001 Volume 33/1/Planar-point-set-fairing-and-fitting-by-arc-splines.pdf |
273 KB |
| Computer-Aided Design/2001 Volume 33/1/Solid-reconstruction-from-orthographic-views-using-2-stage-extrusion.pdf |
314 KB |
| Computer-Aided Design/2001 Volume 33/1/Surface-swept-by-a-toroidal-cutter-during-5-axis-machining.pdf |
309 KB |
| Computer-Aided Design/2001 Volume 33/1/Towards-valid-parametric-CAD-models.pdf |
406 KB |
| Computer-Aided Design/2001 Volume 33/10/'Planar-point-set-fairing-and-fitting-by-arc-splines'-by-Xunnian-Yang-and-Guozhao-Wang.-Computer-Aided-Design,-33,-35-43.pdf |
50 KB |
| Computer-Aided Design/2001 Volume 33/10/A-face-based-mechanism-for-naming,-recording-and-retrieving-topological-entities.pdf |
449 KB |
| Computer-Aided Design/2001 Volume 33/10/A-mechanism-for-validating-dimensioning-and-tolerancing-schemes-in-CAD-systems.pdf |
448 KB |
| Computer-Aided Design/2001 Volume 33/10/Calender.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/10/Forthcoming-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/10/Function-to-form-mapping-model,-representation-and-applications-in-design-synthesis.pdf |
626 KB |
| Computer-Aided Design/2001 Volume 33/10/Methods-of-Shape-Preserving-Spline-Approximation-Boris-I.-Kvasov-World-Scientific-Publishing-Co.,-Singapore,-2000,-[pound-sign]34.00,-356-pp,-ISBN-981-02-4010-4.pdf |
89 KB |
| Computer-Aided Design/2001 Volume 33/10/Uncut-free-pocketing-tool-paths-generation-using-pair-wise-offset-algorithm.pdf |
883 KB |
| Computer-Aided Design/2001 Volume 33/11/Algorithms-for-reverse-engineering-boundary-representation-models.pdf |
445 KB |
| Computer-Aided Design/2001 Volume 33/11/Approximate-shortest-path-on-a-polyhedral-surface-and-its-applications.pdf |
741 KB |
| Computer-Aided Design/2001 Volume 33/11/CAD-Special-Issue-on-Geometric-Modeling-and-Processing.pdf |
36 KB |
| Computer-Aided Design/2001 Volume 33/11/Calendar.pdf |
30 KB |
| Computer-Aided Design/2001 Volume 33/11/Constructing-polygonal-complexes-with-shape-handles-for-curve-interpolation-by-subdivision-surfaces.pdf |
741 KB |
| Computer-Aided Design/2001 Volume 33/11/forthcomingspecialissues.pdf |
31 KB |
| Computer-Aided Design/2001 Volume 33/11/Mesh-fairing-based-on-an-intrinsic-PDE-approach.pdf |
413 KB |
| Computer-Aided Design/2001 Volume 33/11/Mesh-regularization-and-adaptive-smoothing.pdf |
1 MB |
| Computer-Aided Design/2001 Volume 33/11/Remeshing-triangulated-surfaces-with-optimal-parameterizations.pdf |
1 MB |
| Computer-Aided Design/2001 Volume 33/11/Surface-slicing-algorithm-based-on-topology-transition.pdf |
1.1 MB |
| Computer-Aided Design/2001 Volume 33/11/Trimming-analytic-functions-using-right-sided-Poisson-subdivision.pdf |
312 KB |
| Computer-Aided Design/2001 Volume 33/12/A-CAD-integrated-analysis-of-flatness-in-a-form-tolerance-zone.pdf |
1.3 MB |
| Computer-Aided Design/2001 Volume 33/12/A-generic-approach-for-nesting-of-2-D-parts-in-2-D-sheets-using-genetic-and-heuristic-algorithms.pdf |
839 KB |
| Computer-Aided Design/2001 Volume 33/12/A-linear-time,-constant-space-algorithm-for-computing-the-spanning-line-segments-in-three-dimensions.pdf |
197 KB |
| Computer-Aided Design/2001 Volume 33/12/Calendar.pdf |
29 KB |
| Computer-Aided Design/2001 Volume 33/12/Conic-approximation-of-planar-curves.pdf |
202 KB |
| Computer-Aided Design/2001 Volume 33/12/Modifying-the-shape-of-NURBS-surfaces-with-geometric-constraints.pdf |
581 KB |
| Computer-Aided Design/2001 Volume 33/12/Shape-control-of-swept-surface-with-profiles.pdf |
340 KB |
| Computer-Aided Design/2001 Volume 33/12/Special-Issue-Details.pdf |
31 KB |
| Computer-Aided Design/2001 Volume 33/13/A-machining-strategy-for-toolmaking.pdf |
903 KB |
| Computer-Aided Design/2001 Volume 33/13/Calendar.pdf |
29 KB |
| Computer-Aided Design/2001 Volume 33/13/Choosing-nodes-and-knots-in-closed-B-spline-curve-interpolation-to-point-data.pdf |
574 KB |
| Computer-Aided Design/2001 Volume 33/13/Fairing-spline-curves-and-surfaces-by-minimizing-energy.pdf |
263 KB |
| Computer-Aided Design/2001 Volume 33/13/Intelligent-dimensioning-for-mechanical-parts-based-on-feature-extraction.pdf |
339 KB |
| Computer-Aided Design/2001 Volume 33/13/Model-simplification-for-meshing-using-face-clustering.pdf |
359 KB |
| Computer-Aided Design/2001 Volume 33/13/Modeling-methods-for-the-design-of-3D-broadcloth-composite-parts.pdf |
1.4 MB |
| Computer-Aided Design/2001 Volume 33/13/Real-time-interference-analysis-between-a-tool-and-an-environment.pdf |
343 KB |
| Computer-Aided Design/2001 Volume 33/13/Special-Issues.pdf |
31 KB |
| Computer-Aided Design/2001 Volume 33/13/Streamline-modeling-with-subdivision-surfaces-on-the-Gaussian-sphere.pdf |
594 KB |
| Computer-Aided Design/2001 Volume 33/14/A-case-base-of-Case-Based-Design-tools-for-architecture.pdf |
307 KB |
| Computer-Aided Design/2001 Volume 33/14/A-feature-based-approach-to-injection-mould-cooling-system-design.pdf |
1.2 MB |
| Computer-Aided Design/2001 Volume 33/14/A-hybrid-method-for-recognition-of-undercut-features-from-moulded-parts.pdf |
638 KB |
| Computer-Aided Design/2001 Volume 33/14/An-approximation-approach-of-the-clothoid-curve-defined-in-the-interval-[0,-[pi]2]-and-its-offset-by-free-form-curves.pdf |
589 KB |
| Computer-Aided Design/2001 Volume 33/14/calendar.pdf |
29 KB |
| Computer-Aided Design/2001 Volume 33/14/callforpapers.pdf |
86 KB |
| Computer-Aided Design/2001 Volume 33/14/forthcomingspecialissues.pdf |
32 KB |
| Computer-Aided Design/2001 Volume 33/14/indexes.pdf |
73 KB |
| Computer-Aided Design/2001 Volume 33/14/Mapping-of-tubular-woven-composite-preforms-on-to-doubly-curved-surfaces.pdf |
1011 KB |
| Computer-Aided Design/2001 Volume 33/14/Motif-analysis-for-automatic-segmentation-of-CT-surface-contours-into-individual-surface-features.pdf |
988 KB |
| Computer-Aided Design/2001 Volume 33/14/Reconstruction-of-curved-solids-from-engineering-drawings.pdf |
826 KB |
| Computer-Aided Design/2001 Volume 33/2/Approximate-merging-of-a-pair-of-Bezier-curves.pdf |
360 KB |
| Computer-Aided Design/2001 Volume 33/2/Cloud-data-modelling-employing-a-unified,-non-redundant-triangular-mesh.pdf |
2.3 MB |
| Computer-Aided Design/2001 Volume 33/2/Computer-Aided-Machining--the-z-Map-Way-Sculptured-Surface-Machining--Theory-and-Applications;-Byoung-K.-Choi,-Robert-B.-Jerard;-Kluwer-Academic-Publishers,-Dordrecht,-The-Netherlands,-1998,-GBP-135,-368-.pdf |
144 KB |
| Computer-Aided Design/2001 Volume 33/2/Curve-and-surface-fitting-and-design-by-optimal-control-methods.pdf |
467 KB |
| Computer-Aided Design/2001 Volume 33/2/Exact-Taylor-series-coefficients-for-variable-feedrate-CNC-curve-interpolators.pdf |
356 KB |
| Computer-Aided Design/2001 Volume 33/2/Virtual-prototyping-of-mold-design-geometric-mouldability-analysis-for-near-net-shape-manufactured-parts-by-feature-recognition-and-geometric-reasoning.pdf |
509 KB |
| Computer-Aided Design/2001 Volume 33/3/Face-clustering-of-a-large-scale-CAD-model-for-surface-mesh-generation.pdf |
991 KB |
| Computer-Aided Design/2001 Volume 33/3/Feature-based-hex-meshing-methodology-feature-recognition-and-volume-decomposition.pdf |
713 KB |
| Computer-Aided Design/2001 Volume 33/3/Hex-dominant-mesh-generation-using-3D-constrained-triangulation.pdf |
1.1 MB |
| Computer-Aided Design/2001 Volume 33/3/Terminal-edges-Delaunay-(small-angle-based)-algorithm-for-the-quality-triangulation-problem.pdf |
644 KB |
| Computer-Aided Design/2001 Volume 33/3/The-8th-International-Meshing-Roundtable-Special-Issue-Advances-in-Mesh-Generation.pdf |
48 KB |
| Computer-Aided Design/2001 Volume 33/3/Towards-curvilinear-meshing-in-3D-the-case-of-quadratic-simplices.pdf |
925 KB |
| Computer-Aided Design/2001 Volume 33/3/Unstructured-20-node-brick-element-meshing.pdf |
4.8 MB |
| Computer-Aided Design/2001 Volume 33/4/A-G1-connection-around-complicated-curve-meshes-using-C1-NURBS-Boundary-Gregory-Patches.pdf |
867 KB |
| Computer-Aided Design/2001 Volume 33/4/Calendar.pdf |
31 KB |
| Computer-Aided Design/2001 Volume 33/4/Call-for-Papers.pdf |
193 KB |
| Computer-Aided Design/2001 Volume 33/4/CNC-tool-path-in-terms-of-B-spline-curves.pdf |
800 KB |
| Computer-Aided Design/2001 Volume 33/4/Computing-and-visualizing-pose-interpolating-3D-motions.pdf |
1.4 MB |
| Computer-Aided Design/2001 Volume 33/4/Forthcoming-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/4/Rational-Bezier-form-of-hodographs-of-rational-Bezier-curves-and-surfaces.pdf |
575 KB |
| Computer-Aided Design/2001 Volume 33/4/The-development-of-a-layer-based-machining-system.pdf |
686 KB |
| Computer-Aided Design/2001 Volume 33/4/What-Did-the-Circle-Say-to-the-Tangent-Line-Exploring-Analytic-Geometry-with-Mathematica,-D.L.-Vossler-(Ed.);-Academic-Press,-San-Diego,-USA,-1999,-865-pages,-ISBN-0-12-728255-6-($59.95).pdf |
80 KB |
| Computer-Aided Design/2001 Volume 33/5/A-novel-haptics-based-interface-and-sculpting-system-for-physics-based-geometric-design.pdf |
1.1 MB |
| Computer-Aided Design/2001 Volume 33/5/CAD-and-the-Arts.pdf |
659 KB |
| Computer-Aided Design/2001 Volume 33/5/Calendar.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/5/Designer-chaos.pdf |
4.2 MB |
| Computer-Aided Design/2001 Volume 33/5/IDSET-Interactive-Design-System-using-Evolutionary-Techniques.pdf |
766 KB |
| Computer-Aided Design/2001 Volume 33/5/Recent-Special-Issue.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/5/Surface-design-using-hand-motion-with-smoothing.pdf |
925 KB |
| Computer-Aided Design/2001 Volume 33/5/Synthetic-carving-using-implicit-surface-primitives.pdf |
1010 KB |
| Computer-Aided Design/2001 Volume 33/6/2000-Reviewers-for-CAD.pdf |
50 KB |
| Computer-Aided Design/2001 Volume 33/6/Calendar.pdf |
46 KB |
| Computer-Aided Design/2001 Volume 33/6/Construction-of-feature-volumes-using-intersection-of-adjacent-surfaces.pdf |
351 KB |
| Computer-Aided Design/2001 Volume 33/6/Fuzzy-mapping-of-requirements-onto-functions-in-detail-design.pdf |
304 KB |
| Computer-Aided Design/2001 Volume 33/6/Geometry-based-triangulation-of-multiple-trimmed-NURBS-surfaces.pdf |
858 KB |
| Computer-Aided Design/2001 Volume 33/6/New-concepts-and-approaches-in-various-topics-of-computer-aided-design.-CAD-tools-and-algorithms-for-product-design-Edited-by-P.-Brunet,-C.-Hoffman,-and-D.-Roller,-Springer-Verlag,-Berlin-Heidelberg,-2000.pdf |
110 KB |
| Computer-Aided Design/2001 Volume 33/6/Recent-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/6/Sequential-constraint-imposition-for-dimension-driven-solid-models.pdf |
294 KB |
| Computer-Aided Design/2001 Volume 33/7/A-foundation-for-interoperability-in-next-generation-product-development-systems.pdf |
840 KB |
| Computer-Aided Design/2001 Volume 33/7/A-generic-framework-for-transforming-EXPRESS-information-models.pdf |
574 KB |
| Computer-Aided Design/2001 Volume 33/7/A-shape-modelling-applications-programming-interface-for-the-STEP-standard.pdf |
170 KB |
| Computer-Aided Design/2001 Volume 33/7/Mapping-product-structures-between-CAD-and-PDM-systems-using-UML.pdf |
813 KB |
| Computer-Aided Design/2001 Volume 33/7/Product-data-markup-language-a-new-paradigm-for-product-data-exchange-and-integration.pdf |
185 KB |
| Computer-Aided Design/2001 Volume 33/7/Requirements-management-a-representation-scheme-for-product-specifications.pdf |
838 KB |
| Computer-Aided Design/2001 Volume 33/8/A-volume-decomposition-approach-to-machining-feature-extraction-of-casting-and-forging-components.pdf |
960 KB |
| Computer-Aided Design/2001 Volume 33/8/Boundary-extraction-algorithm-for-cutting-area-detection.pdf |
1.1 MB |
| Computer-Aided Design/2001 Volume 33/8/Calendar.pdf |
46 KB |
| Computer-Aided Design/2001 Volume 33/8/Forthcoming--Recent-special-issues.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/8/Geodesic-curvature-preservation-in-surface-flattening-through-constrained-global-optimization.pdf |
837 KB |
| Computer-Aided Design/2001 Volume 33/8/Interference-detection-for-3-axis-mold-machining.pdf |
390 KB |
| Computer-Aided Design/2001 Volume 33/8/Parametrization-for-surface-fitting-in-reverse-engineering.pdf |
1.4 MB |
| Computer-Aided Design/2001 Volume 33/9/A-feature-based-inspection-and-machining-system.pdf |
741 KB |
| Computer-Aided Design/2001 Volume 33/9/Calender.pdf |
46 KB |
| Computer-Aided Design/2001 Volume 33/9/Editorial.pdf |
53 KB |
| Computer-Aided Design/2001 Volume 33/9/Forthcoming-special-issues.pdf |
43 KB |
| Computer-Aided Design/2001 Volume 33/9/Internet-based-collaborative-product-design-with-assembly-features-and-virtual-design-spaces.pdf |
865 KB |
| Computer-Aided Design/2001 Volume 33/9/Operation-decomposition-for-freeform-surface-features-in-process-planning.pdf |
1.5 MB |
| Computer-Aided Design/2001 Volume 33/9/STEP-based-feature-recognition-for-manufacturing-cost-optimization.pdf |
1.1 MB |
| Computer-Aided Design/2002 Volume 34/1/`Source-based'-heterogeneous-solid-modeling.pdf |
763 KB |
| Computer-Aided Design/2002 Volume 34/1/A-computerized-team-approach-for-concurrent-product-and-process-design-optimization.pdf |
482 KB |
| Computer-Aided Design/2002 Volume 34/1/Calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/1/Distributed-database-and-knowledge-base-modeling-for-concurrent-design.pdf |
1 MB |
| Computer-Aided Design/2002 Volume 34/1/forthcoming-special-issue.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/1/Generation-of-a-finite-element-MESH-from-stereolithography-(STL)-files.pdf |
3 MB |
| Computer-Aided Design/2002 Volume 34/1/Qualitative-and-quantitative-comparisons-of-B-spline-offset-surface-approximation-methods.pdf |
384 KB |
| Computer-Aided Design/2002 Volume 34/1/Recognition-of-machining-features-for-cast-then-machined-parts.pdf |
916 KB |
| Computer-Aided Design/2002 Volume 34/10/Calendar.pdf |
39 KB |
| Computer-Aided Design/2002 Volume 34/10/Collaborative-virtual-prototyping-of-product-assemblies-over-the-Internet.pdf |
591 KB |
| Computer-Aided Design/2002 Volume 34/10/Conditions-of-proper-sculptured-surface-machining.pdf |
419 KB |
| Computer-Aided Design/2002 Volume 34/10/ForthcomingRecent-Issues.pdf |
42 KB |
| Computer-Aided Design/2002 Volume 34/10/Hybrid-rapid-prototyping-system-using-machining-and-deposition.pdf |
1.6 MB |
| Computer-Aided Design/2002 Volume 34/10/Modeling-the-material-grading-and-structures-of-heterogeneous-objects-for-layered-manufacturing.pdf |
512 KB |
| Computer-Aided Design/2002 Volume 34/10/NURBS-surface-fitting-using-orthogonal-coordinate-transform-for-rapid-product-development.pdf |
385 KB |
| Computer-Aided Design/2002 Volume 34/10/Rapid-technologies-solutions-for-today-and-tomorrow.pdf |
73 KB |
| Computer-Aided Design/2002 Volume 34/10/STL-file-generation-from-measured-point-data-by-segmentation-and-Delaunay-triangulation.pdf |
1.3 MB |
| Computer-Aided Design/2002 Volume 34/10/Surface-roughness-visualisation-for-rapid-prototyping-models.pdf |
315 KB |
| Computer-Aided Design/2002 Volume 34/11/A-new-constructive-approach-to-constraint-based-geometric-design.pdf |
513 KB |
| Computer-Aided Design/2002 Volume 34/11/Biarc-approximation-of-NURBS-curves.pdf |
303 KB |
| Computer-Aided Design/2002 Volume 34/11/Calendar.pdf |
28 KB |
| Computer-Aided Design/2002 Volume 34/11/ForthcomingRecent-Special-Issues.pdf |
42 KB |
| Computer-Aided Design/2002 Volume 34/11/Multiple-sweeping-using-quaternion-operations.pdf |
451 KB |
| Computer-Aided Design/2002 Volume 34/11/Recognizing-manufacturing-features-from-a-design-by-feature-model.pdf |
662 KB |
| Computer-Aided Design/2002 Volume 34/11/Surface-flattening-based-on-energy-model.pdf |
967 KB |
| Computer-Aided Design/2002 Volume 34/11/Using-sign-algebra-for-qualitative-spatial-reasoning-about-the-configuration-of-mechanisms.pdf |
1.1 MB |
| Computer-Aided Design/2002 Volume 34/11/Variable-radius-circles-in-cluster-merging-II.-Rotational-clusters.pdf |
155 KB |
| Computer-Aided Design/2002 Volume 34/11/Variable-radius-circles-of-cluster-merging-in-geometric-constraints-I.-Translational-clusters.pdf |
237 KB |
| Computer-Aided Design/2002 Volume 34/12/`Computer-based-tools-and-methods-of-competitive-engineering'.pdf |
46 KB |
| Computer-Aided Design/2002 Volume 34/12/A-discrete-mechanics-model-for-deformable-bodies.pdf |
518 KB |
| Computer-Aided Design/2002 Volume 34/12/Calendar.pdf |
39 KB |
| Computer-Aided Design/2002 Volume 34/12/Call-for-Papers.pdf |
102 KB |
| Computer-Aided Design/2002 Volume 34/12/ForthcomingRecent-Special-Issues.pdf |
42 KB |
| Computer-Aided Design/2002 Volume 34/12/Improvement-of-free-form-surfaces-for-product-styling-applications.pdf |
758 KB |
| Computer-Aided Design/2002 Volume 34/12/Integrating-part-and-assembly-modelling.pdf |
822 KB |
| Computer-Aided Design/2002 Volume 34/12/Modelling-natural-objects-with-[alpha]-complexes.pdf |
697 KB |
| Computer-Aided Design/2002 Volume 34/12/Product-variety-optimization-under-modular-architecture.pdf |
631 KB |
| Computer-Aided Design/2002 Volume 34/12/Shape-optimization-under-fatigue-using-continuum-damage-mechanics.pdf |
565 KB |
| Computer-Aided Design/2002 Volume 34/12/The-optimization-paradigm-in-engineering-design-promises-and-challenges.pdf |
544 KB |
| Computer-Aided Design/2002 Volume 34/13/A-Fine-Mesh-BookMesh-Generation-application-to-finite-elements-Pascal-Jean-Frey-and-Paul-Louis-George,-Hermes-Science-Europe,-Oxford-&-Paris,-2000,-$109,-814-pages,-ISBN-1-903398-00-2.pdf |
38 KB |
| Computer-Aided Design/2002 Volume 34/13/An-automatic-method-for-controlling-the-centre-of-gravity-of-a-model.pdf |
421 KB |
| Computer-Aided Design/2002 Volume 34/13/Approximation-by-fat-arcs-and-fat-biarcs.pdf |
426 KB |
| Computer-Aided Design/2002 Volume 34/13/Calendar.pdf |
39 KB |
| Computer-Aided Design/2002 Volume 34/13/Collaborative-conceptual-design--state-of-the-art-and-future-trends.pdf |
289 KB |
| Computer-Aided Design/2002 Volume 34/13/Container-spaces-and-functional-features-for-top-down-3D-layout-design.pdf |
1 MB |
| Computer-Aided Design/2002 Volume 34/13/Efficient-circular-arc-interpolation-based-on-active-tolerance-control.pdf |
203 KB |
| Computer-Aided Design/2002 Volume 34/13/ForthcomingRecent-Special-Issues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/13/LEDA--a-platform-for-combinatorial-and-geometric-computing-Kurt-Mehlhorn-and-Stefan-Naher,-Cambridge-University-Press,-Cambridge,-UK,-1999,-[pound-sign]50-($80),-1018-pages,-ISBN-0-521-56329-1.pdf |
92 KB |
| Computer-Aided Design/2002 Volume 34/13/Machine-design--a-classical-mechanical-engineering-textbook-Machine-design--A-CAD-Approach;-A.D.-Dimarogonas-(Ed.);-Wiley,-New-York,-2001,-996-pages,-ISBN-0-471-31528-1-([pound-sign]-70.95).pdf |
43 KB |
| Computer-Aided Design/2002 Volume 34/14/A-modelling-tool-for-the-management-of-product-data-in-a-co-design-environment.pdf |
496 KB |
| Computer-Aided Design/2002 Volume 34/14/A-note-on-the-use-of-STEP-for-interfacing-design-to-process-planning.pdf |
547 KB |
| Computer-Aided Design/2002 Volume 34/14/A-PDESSTEP-based-model-and-system-for-concurrent-integrated-design-and-assembly-planning.pdf |
781 KB |
| Computer-Aided Design/2002 Volume 34/14/Calendar.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/14/Editorial.pdf |
46 KB |
| Computer-Aided Design/2002 Volume 34/14/Forthcoming--Recent-Special-Issues.pdf |
34 KB |
| Computer-Aided Design/2002 Volume 34/14/Progress-towards-an-international-standard-for-data-transfer-in-rapid-prototyping-and-layered-manufacturing.pdf |
130 KB |
| Computer-Aided Design/2002 Volume 34/14/Utilization-of-STEP-AP-210-at-The-Boeing-Company.pdf |
320 KB |
| Computer-Aided Design/2002 Volume 34/14/Volume-Contents,-Author-Index,-Keyword-Index-for-Vol-34.pdf |
83 KB |
| Computer-Aided Design/2002 Volume 34/2/A-constructive-approach-to-solving-3-D-geometric-constraint-systems-using-dependence-analysis.pdf |
532 KB |
| Computer-Aided Design/2002 Volume 34/2/Algorithm-for-finding-all-k-nearest-neighbors.pdf |
217 KB |
| Computer-Aided Design/2002 Volume 34/2/B-Rep-model-simplification-by-automatic-filletround-suppressing-for-efficient-automatic-feature-recognition.pdf |
823 KB |
| Computer-Aided Design/2002 Volume 34/2/calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/2/callforpapers.pdf |
85 KB |
| Computer-Aided Design/2002 Volume 34/2/Combinatorial-manifold-mesh-reconstruction-and-optimization-from-unorganized-points-with-arbitrary-topology.pdf |
1.1 MB |
| Computer-Aided Design/2002 Volume 34/2/forthcomingspecialissues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/2/Integrated-modeling,-finite-element-analysis,-and-engineering-design-for-thin-shell-structures-using-subdivision.pdf |
392 KB |
| Computer-Aided Design/2002 Volume 34/2/Iso-planar-interpolation-for-the-machining-of-implicit-surfaces.pdf |
570 KB |
| Computer-Aided Design/2002 Volume 34/2/Machining-efficiency-comparison-direction-parallel-tool-path-with-contour-parallel-tool-path.pdf |
511 KB |
| Computer-Aided Design/2002 Volume 34/3/A-general-model-for-machinable-features-and-its-application-to-machinability-evaluation-of-mechanical-parts.pdf |
557 KB |
| Computer-Aided Design/2002 Volume 34/3/Adaptive-feedrate-interpolation-for-parametric-curves-with-a-confined-chord-error.pdf |
260 KB |
| Computer-Aided Design/2002 Volume 34/3/calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/3/callforpapers.pdf |
85 KB |
| Computer-Aided Design/2002 Volume 34/3/Computing-non-self-intersecting-offsets-of-NURBS-surfaces.pdf |
1.4 MB |
| Computer-Aided Design/2002 Volume 34/3/forthcomingspecialissues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/3/Intelligent-location-dimensioning-of-cylindrical-surfaces-in-mechanical-parts.pdf |
234 KB |
| Computer-Aided Design/2002 Volume 34/3/Measurement-based-modification-of-NURBS-surfaces.pdf |
424 KB |
| Computer-Aided Design/2002 Volume 34/3/Recognition-of-maximal-features-by-volume-decomposition.pdf |
892 KB |
| Computer-Aided Design/2002 Volume 34/3/Tool-selection-for-five-axis-curvature-matched-machining.pdf |
417 KB |
| Computer-Aided Design/2002 Volume 34/4/Adaptive-fairing-of-digitized-point-data-with-discrete-curvature.pdf |
1.7 MB |
| Computer-Aided Design/2002 Volume 34/4/Calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/4/Efficient-stock-cutting-for-laminated-manufacturing.pdf |
825 KB |
| Computer-Aided Design/2002 Volume 34/4/Embedding-visual-cognition-in-3D-reconstruction-from-multi-view-engineering-drawings.pdf |
918 KB |
| Computer-Aided Design/2002 Volume 34/4/ForthcomingRecent-Special-Issues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/4/Generation-of-collision-free-5-axis-tool-paths-using-a-haptic-surface.pdf |
689 KB |
| Computer-Aided Design/2002 Volume 34/4/Offset-tool-path-linking-for-pocket-machining.pdf |
2.1 MB |
| Computer-Aided Design/2002 Volume 34/4/The-conversion-of-a-dynamic-B-spline-curve-into-piecewise-polynomials-in-power-form.pdf |
275 KB |
| Computer-Aided Design/2002 Volume 34/5/A-machining-potential-field-approach-to-tool-path-generation-for-multi-axis-sculptured-surface-machining.pdf |
3.2 MB |
| Computer-Aided Design/2002 Volume 34/5/A-new-curve-based-approach-to-polyhedral-machining.pdf |
3.3 MB |
| Computer-Aided Design/2002 Volume 34/5/An-extension-algorithm-for-B-splines-by-curve-unclamping.pdf |
190 KB |
| Computer-Aided Design/2002 Volume 34/5/Calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/5/Compensating-for-systematic-errors-in-5-axis-NC-machining.pdf |
312 KB |
| Computer-Aided Design/2002 Volume 34/5/Detail-feature-recognition-and-decomposition-in-solid-model.pdf |
316 KB |
| Computer-Aided Design/2002 Volume 34/5/Forthcoming-special-issues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/5/Generalization-of-the-imprint-method-to-general-surfaces-of-revolution-for-NC-machining.pdf |
308 KB |
| Computer-Aided Design/2002 Volume 34/5/Intelligent-approaches-for-generating-assembly-drawings-from-3-D-computer-models-of-mechanical-products.pdf |
211 KB |
| Computer-Aided Design/2002 Volume 34/6/An-integrated-modelling-environment-for-the-embodiment-of-mechanical-systems.pdf |
3.3 MB |
| Computer-Aided Design/2002 Volume 34/6/Calendar.pdf |
39 KB |
| Computer-Aided Design/2002 Volume 34/6/Forthcoming-Special-Issues.pdf |
42 KB |
| Computer-Aided Design/2002 Volume 34/6/Geometric-constraint-solving-with-conics-and-linkages.pdf |
946 KB |
| Computer-Aided Design/2002 Volume 34/6/Reasoning-Boolean-operation-based-modeling-for-heterogeneous-objects.pdf |
925 KB |
| Computer-Aided Design/2002 Volume 34/6/The-application-of-surface-visibility-and-moldability-to-parting-line-generation.pdf |
1.4 MB |
| Computer-Aided Design/2002 Volume 34/6/Toolpath-generation-along-directions-of-maximum-kinematic-performance;-a-first-cut-at-machine-optimal-paths.pdf |
2.4 MB |
| Computer-Aided Design/2002 Volume 34/7/Calendar.pdf |
39 KB |
| Computer-Aided Design/2002 Volume 34/7/Developable-Bezier-patches-properties-and-design.pdf |
679 KB |
| Computer-Aided Design/2002 Volume 34/7/Exact-and-efficient-computation-of-moments-of-free-form-surface-and-trivariate-based-geometry.pdf |
712 KB |
| Computer-Aided Design/2002 Volume 34/7/FastShip-&-NURBS-modeling-a-historical-note.pdf |
106 KB |
| Computer-Aided Design/2002 Volume 34/7/Forthcoming-special-issues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/7/MacSurf-an-early-NURBS-shiphull-design-system-a-historical-note.pdf |
53 KB |
| Computer-Aided Design/2002 Volume 34/7/On-Pierre-Bezier's-life-and-motivations.pdf |
337 KB |
| Computer-Aided Design/2002 Volume 34/7/Pierre-Etienne-Bezier-(1910-1999),-in-memoriam.pdf |
54 KB |
| Computer-Aided Design/2002 Volume 34/8/A-survey-of-computational-approaches-to-three-dimensional-layout-problems.pdf |
375 KB |
| Computer-Aided Design/2002 Volume 34/8/Calendar.pdf |
29 KB |
| Computer-Aided Design/2002 Volume 34/8/ForthcomingRecent-Special-Issues.pdf |
32 KB |
| Computer-Aided Design/2002 Volume 34/8/Free-form-design-using-axial-curve-pairs.pdf |
601 KB |
| Computer-Aided Design/2002 Volume 34/8/High-level-feature-recognition-using-feature-relationship-graphs.pdf |
1.4 MB |
| Computer-Aided Design/2002 Volume 34/8/Separating-an-object-from-its-cast.pdf |
373 KB |
| Computer-Aided Design/2002 Volume 34/9/Boundary-evaluation-for-interval-Bezier-curve.pdf |
265 KB |
| Computer-Aided Design/2002 Volume 34/9/Constant-scallop-height-tool-path-generation-for-three-axis-sculptured-surface-machining.pdf |
225 KB |
| Computer-Aided Design/2002 Volume 34/9/Design-with-part-behaviors-behavior-model,-representation-and-applications.pdf |
3.3 MB |
| Computer-Aided Design/2002 Volume 34/9/Flatness-tolerance-evaluation-an-approximate-minimum-zone-solution.pdf |
204 KB |
| Computer-Aided Design/2002 Volume 34/9/Holo-extraction-of-information-from-paper-drawings-for-3D-reconstruction.pdf |
554 KB |
| Computer-Aided Design/2003 Volume 35/1/A-connector-based-hierarchical-approach-to-assembly-sequence-planning-for-mechanical-assemblies.pdf |
543 KB |
| Computer-Aided Design/2003 Volume 35/1/A-database-system-of-mechanical-components-based-on-geometric-and-topological-similarity.-Part-I-representation.pdf |
386 KB |
| Computer-Aided Design/2003 Volume 35/1/A-database-system-of-mechanical-components-based-on-geometric-and-topological-similarity.-Part-II-indexing,-retrieval,-matching,-and-similarity-assessment.pdf |
233 KB |
| Computer-Aided Design/2003 Volume 35/1/A-graph-based-algorithm-for-extracting-units-and-loops-from-architectural-floor-plans-for-a-building-evacuation-model.pdf |
537 KB |
| Computer-Aided Design/2003 Volume 35/1/An-efficient-approach-for-solving-the-straightness-and-the-flatness-problems-at-large-number-of-data-points.pdf |
236 KB |
| Computer-Aided Design/2003 Volume 35/1/Calendar.pdf |
32 KB |
| Computer-Aided Design/2003 Volume 35/1/Editorial-Board.pdf |
21 KB |
| Computer-Aided Design/2003 Volume 35/1/Erratum-to-'Choosing-nodes-and-knots-in-closed-B-spline-curve-interpolation-to-point-data'-by-H.-Park-Computer-Aided-Design-33(13),-967-974-(2001).pdf |
33 KB |
| Computer-Aided Design/2003 Volume 35/1/Forthcoming--Recent-Special-Issues.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/1/Locally-optimal-cutting-positions-for-5-axis-sculptured-surface-machining.pdf |
717 KB |
| Computer-Aided Design/2003 Volume 35/1/Minimizing-the-total-projection-of-a-set-of-vectors,-with-applications-to-layered-manufacturing.pdf |
295 KB |
| Computer-Aided Design/2003 Volume 35/1/Newton-methods-for-parametric-surface-registration.-Part-I.-Theory.pdf |
142 KB |
| Computer-Aided Design/2003 Volume 35/1/Newton-methods-for-parametric-surface-registration.-Part-II.-Experimental-validation.pdf |
217 KB |
| Computer-Aided Design/2003 Volume 35/1/NURBS-from-the-Pioneers-An-Introduction-to-NURBS-with-Historical-Perspective;-David-F.-Rogers-(Ed.);-Morgan-Kaufmann,-San-Francisco,-2001,-300-pages,-ISBN-1-55860-669-6,-[pound-sign]33.95.pdf |
118 KB |
| Computer-Aided Design/2003 Volume 35/1/Tool-path-generation-for-Z-constant-contour-machining.pdf |
625 KB |
| Computer-Aided Design/2003 Volume 35/10/Algebraic-manipulation-in-the-Bernstein-form-made-simple-via-convolutions.pdf |
209 KB |
| Computer-Aided Design/2003 Volume 35/10/An-algorithm-for-optimal-free-form-object-matching.pdf |
364 KB |
| Computer-Aided Design/2003 Volume 35/10/Approximate-merging-of-B-spline-curves-via-knot-adjustment-and-constrained-optimization.pdf |
165 KB |
| Computer-Aided Design/2003 Volume 35/10/Calendar.pdf |
32 KB |
| Computer-Aided Design/2003 Volume 35/10/Computer-aided-contouring-operation-for-traveling-wire-electric-discharge-machining-(EDM).pdf |
353 KB |
| Computer-Aided Design/2003 Volume 35/10/Computing-constant-offsets-of-a-NURBS-B-Rep.pdf |
532 KB |
| Computer-Aided Design/2003 Volume 35/10/Development-of-an-Internet-enabled-interactive-fixture-design-system.pdf |
764 KB |
| Computer-Aided Design/2003 Volume 35/10/Dynamic-highlight-line-generation-for-locally-deforming-NURBS-surfaces.pdf |
358 KB |
| Computer-Aided Design/2003 Volume 35/10/Editorial-Board.pdf |
10 KB |
| Computer-Aided Design/2003 Volume 35/10/Forthcoming-special-issues.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/10/Minimum-distance-between-a-canal-surface-and-a-simple-surface.pdf |
344 KB |
| Computer-Aided Design/2003 Volume 35/10/Nonlinear-kinematic-tolerance-analysis-of-planar-mechanical-systems.pdf |
518 KB |
| Computer-Aided Design/2003 Volume 35/11/A-Z-map-update-method-for-linearly-moving-tools.pdf |
493 KB |
| Computer-Aided Design/2003 Volume 35/11/An-approach-to-identify-design-and-manufacturing-features-from-a-data-exchanged-part-model.pdf |
534 KB |
| Computer-Aided Design/2003 Volume 35/11/Book-Review.pdf |
41 KB |
| Computer-Aided Design/2003 Volume 35/11/CAD-04.pdf |
254 KB |
| Computer-Aided Design/2003 Volume 35/11/Calendar.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/11/Curvature-behaviours-at-extraordinary-points-of-subdivision-surfaces.pdf |
149 KB |
| Computer-Aided Design/2003 Volume 35/11/Design-of-motion-along-parameterized-curves-using-B-splines.pdf |
219 KB |
| Computer-Aided Design/2003 Volume 35/11/Fast-cell-based-decomposition-and-applications-to-solid-modeling.pdf |
486 KB |
| Computer-Aided Design/2003 Volume 35/11/Forthcoming-Issues.pdf |
36 KB |
| Computer-Aided Design/2003 Volume 35/11/Optimal-connection-of-loops-in-laminated-object-manufacturing.pdf |
808 KB |
| Computer-Aided Design/2003 Volume 35/11/Traversing-the-machining-graph-of-a-pocket.pdf |
1 MB |
| Computer-Aided Design/2003 Volume 35/12/An-algorithm-for-automatic-2D-quadrilateral-mesh-generation-with-line-constraints.pdf |
1.5 MB |
| Computer-Aided Design/2003 Volume 35/12/Architecture-and-implementation-of-a-shop-floor-programming-system-for-STEP-compliant-CNC.pdf |
1011 KB |
| Computer-Aided Design/2003 Volume 35/12/Calendar.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/12/Call-for-Papers.pdf |
42 KB |
| Computer-Aided Design/2003 Volume 35/12/CALL-FOR-PAPERS_1.pdf |
38 KB |
| Computer-Aided Design/2003 Volume 35/12/Feature-extraction-and-volume-decomposition-for-orthogonal-layered-manufacturing.pdf |
342 KB |
| Computer-Aided Design/2003 Volume 35/12/Forthcoming-Issues.pdf |
36 KB |
| Computer-Aided Design/2003 Volume 35/12/Knowledge-capturing-methodology-in-process-planning.pdf |
769 KB |
| Computer-Aided Design/2003 Volume 35/12/Offset-of-curves-on-tessellated-surfaces.pdf |
504 KB |
| Computer-Aided Design/2003 Volume 35/12/Selecting-and-parameterising-components-using-knowledge-based-configuration-and-a-heuristic-that-learns-and-forgets.pdf |
567 KB |
| Computer-Aided Design/2003 Volume 35/12/Splines-with-Pictures-and-Proofs-Geometric-Modeling-with-Splines-An-Introduction,-Elaine-Cohen,-Richard-F.-Riesenfeld,-Gershon-Elber-(Eds.);-AK-Peters,-Natick,-MA,-2001,-648-pages,-ISBN-1-56881-137-3-([p.pdf |
45 KB |
| Computer-Aided Design/2003 Volume 35/12/Splines-with-Pictures-and-Proofs-Geometric-Modeling-with-Splines-An-Introduction;-Elaine-Cohen,-Richard-F.-Riesenfeld,-Gershon-Elber-(Eds.);-AK-Peters,-Natick,-MA,-2001,-648-pages,-ISBN-1-56881-137-3-([p.pdf |
103 KB |
| Computer-Aided Design/2003 Volume 35/12/The-stencil-buffer-sweep-plane-algorithm-for-5-axis-CNC-tool-path-verification.pdf |
404 KB |
| Computer-Aided Design/2003 Volume 35/13/A-parametric-interpolator-with-confined-chord-errors,-acceleration-and-deceleration-for-NC-machining.pdf |
457 KB |
| Computer-Aided Design/2003 Volume 35/13/A-set-of-standard-modeling-commands-for-the-history-based-parametric-approach.pdf |
515 KB |
| Computer-Aided Design/2003 Volume 35/13/Angular-interpolation-of-bi-parameter-curves.pdf |
349 KB |
| Computer-Aided Design/2003 Volume 35/13/Calendar.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/13/Encapsulation-of-geometric-functions-for-ship-structural-CAD-using-a-STEP-database-as-native-storage.pdf |
639 KB |
| Computer-Aided Design/2003 Volume 35/13/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2003 Volume 35/13/Free-form-deformation-of-constructive-shell-models.pdf |
686 KB |
| Computer-Aided Design/2003 Volume 35/13/Generating-sacrificial-multi-piece-molds-using-accessibility-driven-spatial-partitioning.pdf |
520 KB |
| Computer-Aided Design/2003 Volume 35/13/Geometric-and-form-feature-recognition-tools-applied-to-a-design-for-assembly-methodology.pdf |
833 KB |
| Computer-Aided Design/2003 Volume 35/13/Improvements-to-algorithms-for-computing-the-Minkowski-sum-of-3-polytopes.pdf |
497 KB |
| Computer-Aided Design/2003 Volume 35/13/Solid-model-reconstruction-from-engineering-paper-drawings-using-Genetic-Algorithms.pdf |
341 KB |
| Computer-Aided Design/2003 Volume 35/13/Special-issue-of-computer-aided-design-Bio-CAD.pdf |
37 KB |
| Computer-Aided Design/2003 Volume 35/14/Calendar.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/14/Forthcoming-Issues.pdf |
36 KB |
| Computer-Aided Design/2003 Volume 35/14/Generating-assembly-features-onto-split-solid-models.pdf |
2 MB |
| Computer-Aided Design/2003 Volume 35/14/Isophote-interpolation.pdf |
422 KB |
| Computer-Aided Design/2003 Volume 35/14/Lofted-B-spline-surface-interpolation-by-linearly-constrained-energy-minimization.pdf |
615 KB |
| Computer-Aided Design/2003 Volume 35/14/Maximal-intersection-of-spherical-polygons-by-an-arc-with-applications-to-4-axis-machining.pdf |
737 KB |
| Computer-Aided Design/2003 Volume 35/14/Mechanistic-modelling-of-the-milling-process-using-an-adaptive-depth-buffer.pdf |
788 KB |
| Computer-Aided Design/2003 Volume 35/14/Polynomial-approximation-to-clothoids-via-s-power-series.pdf |
196 KB |
| Computer-Aided Design/2003 Volume 35/14/Volume-index.pdf |
87 KB |
| Computer-Aided Design/2003 Volume 35/2/A-corner-looping-based-tool-path-for-pocket-milling.pdf |
656 KB |
| Computer-Aided Design/2003 Volume 35/2/Adaptive-iso-planar-tool-path-generation-for-machining-of-free-form-surfaces.pdf |
815 KB |
| Computer-Aided Design/2003 Volume 35/2/An-integrated-CAPPCAM-system-for-stamping-die-pattern-machining.pdf |
726 KB |
| Computer-Aided Design/2003 Volume 35/2/Boundary-conformed-toolpath-generation-for-trimmed-free-form-surfaces.pdf |
925 KB |
| Computer-Aided Design/2003 Volume 35/2/C-space-based-CAPP-algorithm-for-freeform-die-cavity-machining.pdf |
885 KB |
| Computer-Aided Design/2003 Volume 35/2/Calendar.pdf |
32 KB |
| Computer-Aided Design/2003 Volume 35/2/Editorial-(Part-1).pdf |
43 KB |
| Computer-Aided Design/2003 Volume 35/2/Editorial-Board.pdf |
9 KB |
| Computer-Aided Design/2003 Volume 35/2/Fast-inverse-offset-computation-using-polygon-rendering-hardware.pdf |
662 KB |
| Computer-Aided Design/2003 Volume 35/2/Forthcoming--Recent-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2003 Volume 35/2/Multiresolution-analysis-as-an-approach-for-tool-path-planning-in-NC-machining.pdf |
518 KB |
| Computer-Aided Design/2003 Volume 35/3/A-steepest-descent-algorithm-for-circularity-evaluation.pdf |
221 KB |
| Computer-Aided Design/2003 Volume 35/3/An-algorithm-for-the-interpolation-of-hybrid-curves.pdf |
253 KB |
| Computer-Aided Design/2003 Volume 35/3/Calendar.pdf |
31 KB |
| Computer-Aided Design/2003 Volume 35/3/Computing-isophotos-of-surface-of-revolution-and-canal-surface.pdf |
268 KB |
| Computer-Aided Design/2003 Volume 35/3/Design-of-heterogeneous-turbine-blade.pdf |
376 KB |
| Computer-Aided Design/2003 Volume 35/3/Editorial-Board.pdf |
12 KB |
| Computer-Aided Design/2003 Volume 35/3/Flank-milling-with-flat-end-milling-cutters.pdf |
308 KB |
| Computer-Aided Design/2003 Volume 35/3/Forthcoming--Recent-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2003 Volume 35/3/From-laser-scanned-data-to-feature-human-model-a-system-based-on-fuzzy-logic-concept.pdf |
676 KB |
| Computer-Aided Design/2003 Volume 35/3/Kinematic-analysis-of-spatial-fixed-axis-higher-pairs-using-configuration-spaces.pdf |
464 KB |
| Computer-Aided Design/2003 Volume 35/3/Linear-and-angular-feedrate-interpolation-for-planar-implicit-curves.pdf |
370 KB |
| Computer-Aided Design/2003 Volume 35/3/Multiresolution-modeling-techniques-in-CAD.pdf |
655 KB |
| Computer-Aided Design/2003 Volume 35/4/Calendar.pdf |
32 KB |
| Computer-Aided Design/2003 Volume 35/4/Collision-free-finishing-toolpaths-from-visibility-data.pdf |
1 MB |
| Computer-Aided Design/2003 Volume 35/4/Creation-of-3-D-tiny-statue-by-5-axis-control-ultraprecision-machining.pdf |
762 KB |
| Computer-Aided Design/2003 Volume 35/4/Editorial-(Part-2).pdf |
38 KB |
| Computer-Aided Design/2003 Volume 35/4/Editorial-Board.pdf |
10 KB |
| Computer-Aided Design/2003 Volume 35/4/Forthcoming--Recent-Special-Issues.pdf |
35 KB |
| Computer-Aided Design/2003 Volume 35/4/Influence-of-tool-path-strategy-on-the-cycle-time-of-high-speed-milling.pdf |
372 KB |
| Computer-Aided Design/2003 Volume 35/4/Modeling-of-cutting-geometry-and-forces-for-5-axis-sculptured-surface-machining.pdf |
732 KB |
| Computer-Aided Design/2003 Volume 35/4/Off-line-feed-rate-scheduling-using-virtual-CNC-based-on-an-evaluation-of-cutting-performance.pdf |
905 KB |
| Computer-Aided Design/2003 Volume 35/4/Rolling-ball-method-for-5-axis-surface-machining.pdf |
609 KB |
| Computer-Aided Design/2003 Volume 35/4/Tool-path-deformation-in-5-axis-flank-milling-using-envelope-surface.pdf |
389 KB |
| Computer-Aided Design/2003 Volume 35/5/Automatic-feedrate-adjustment-for-pocket-machining.pdf |
515 KB |
| Computer-Aided Design/2003 Volume 35/5/Bringing-Line-Geometry-Together-with-CAGD-Computational-Line-Geometry;-Helmut-Pottmann,-Johannes-Wallner-(Eds.);-Springer,-Berlin,-2001,-563-pages,-ISBN-3-540-42058-4-([pound-sign]55.50).pdf |
101 KB |
| Computer-Aided Design/2003 Volume 35/5/Calendar.pdf |
32 KB |
| Computer-Aided Design/2003 Volume 35/5/Computer-aided-design-method-for-the-components-made-of-heterogeneous-materials.pdf |
318 KB |
| Computer-Aided Design/2003 Volume 35/5/Computing-offsets-of-trimmed-NURBS-surfaces.pdf |
248 KB |
| Computer-Aided Design/2003 Volume 35/5/Editorial-Board.pdf |
11 KB |
| Computer-Aided Design/2003 Volume 35/5/Extension-of-surface-reconstruction-algorithm-to-the-global-stitching-and-repairing-of-STL-models.pdf |
587 KB |
| Computer-Aided Design/2003 Volume 35/5/Forthcoming--Recent-Special-Issues.pdf |
35 KB |
| Computer-Aided Design/2003 Volume 35/5/Learning-CAGD-is-Easier-and-More-Fun-than-Ever-The-Essentials-of-CAGD;-G.-Farin,-D.-Hansford,-A.K.-Peters,-M.A.-Natick-(Eds.),-2000,-248-pages,-ISBN-1-56881-123-3-([pound-sign]-33).pdf |
107 KB |
| Computer-Aided Design/2003 Volume 35/5/Mitered-offset-for-profile-machining.pdf |
206 KB |
| Computer-Aided Design/2003 Volume 35/5/Optimal-and-collision-free-tool-posture-in-five-axis-machining-through-the-tight-integration-of-tool-path-generation-and-machine-simulation.pdf |
627 KB |
| Computer-Aided Design/2003 Volume 35/5/Parametric-circles-and-spheres.pdf |
192 KB |
| Computer-Aided Design/2003 Volume 35/5/Tool-path-generation-from-measured-data.pdf |
787 KB |
| Computer-Aided Design/2003 Volume 35/5/Web-based-distributed-system-and-database-modeling-for-concurrent-design.pdf |
1.9 MB |
| Computer-Aided Design/2003 Volume 35/6/A-constrained-guided-G1-continuous-spline-curve.pdf |
716 KB |
| Computer-Aided Design/2003 Volume 35/6/Calendar.pdf |
33 KB |
| Computer-Aided Design/2003 Volume 35/6/Call-for-Papers.pdf |
120 KB |
| Computer-Aided Design/2003 Volume 35/6/Circle-approximation-using-integral-B-splines.pdf |
146 KB |
| Computer-Aided Design/2003 Volume 35/6/Compressed-piecewise-circular-approximations-of-3D-curves.pdf |
502 KB |
| Computer-Aided Design/2003 Volume 35/6/Contour-offset-approach-to-spiral-toolpath-generation-with-constant-scallop-height.pdf |
472 KB |
| Computer-Aided Design/2003 Volume 35/6/Editorial-board.pdf |
10 KB |
| Computer-Aided Design/2003 Volume 35/6/ForthcomingRecent-Special-Issues.pdf |
35 KB |
| Computer-Aided Design/2003 Volume 35/6/Optimizing-tool-orientations-for-5-axis-machining-by-configuration-space-search-method.pdf |
1.6 MB |
| Computer-Aided Design/2003 Volume 35/6/Parameter-synthesis-of-higher-kinematic-pairs.pdf |
328 KB |
| Computer-Aided Design/2003 Volume 35/6/Parametric-face-coding-for-invariant-model-representation.pdf |
575 KB |
| Computer-Aided Design/2003 Volume 35/6/Virtual-human-modeling-from-photographs-for-garment-industry.pdf |
550 KB |
| Computer-Aided Design/2003 Volume 35/7/Calendar.pdf |
42 KB |
| Computer-Aided Design/2003 Volume 35/7/Constructing-medial-axis-transform-of-planar-domains-with-curved-boundaries.pdf |
757 KB |
| Computer-Aided Design/2003 Volume 35/7/Error-based-segmentation-of-cloud-data-for-direct-rapid-prototyping.pdf |
2.3 MB |
| Computer-Aided Design/2003 Volume 35/7/Feature-based-3D-garment-design-through-2D-sketches.pdf |
2.6 MB |
| Computer-Aided Design/2003 Volume 35/7/ForthcomingRecent-Special-Issues.pdf |
43 KB |
| Computer-Aided Design/2003 Volume 35/7/Garment-pattern-generation-from-body-scan-data.pdf |
501 KB |
| Computer-Aided Design/2003 Volume 35/7/Guide-for-Authors.pdf |
10 KB |
| Computer-Aided Design/2003 Volume 35/7/Protecting-critical-facets-in-layered-manufacturing-implementation-and-experimental-results.pdf |
974 KB |
| Computer-Aided Design/2003 Volume 35/7/Recognising-symmetry-in-solid-models.pdf |
1.6 MB |
| Computer-Aided Design/2003 Volume 35/7/Reducing-feasible-contacts-between-polyhedral-models-to-red-blue-intersections-on-the-sphere.pdf |
1000 KB |
| Computer-Aided Design/2003 Volume 35/8/A-genetic-algorithm-for-combined-topology-and-shape-optimisations.pdf |
397 KB |
| Computer-Aided Design/2003 Volume 35/8/Calendar.pdf |
33 KB |
| Computer-Aided Design/2003 Volume 35/8/Cam-shape-optimisation-by-genetic-algorithm.pdf |
277 KB |
| Computer-Aided Design/2003 Volume 35/8/Data-fitting-with-a-spline-using-a-real-coded-genetic-algorithm.pdf |
303 KB |
| Computer-Aided Design/2003 Volume 35/8/Forthcoming-Special-Issues.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/8/Genetic-algorithms-in-CAD.pdf |
39 KB |
| Computer-Aided Design/2003 Volume 35/8/Genetic-algorithms-in-computer-aided-design.pdf |
320 KB |
| Computer-Aided Design/2003 Volume 35/8/Motion-fairing-using-genetic-algorithms.pdf |
307 KB |
| Computer-Aided Design/2003 Volume 35/9/A-dithering-algorithm-for-local-composition-control-with-three-dimensional-printing.pdf |
791 KB |
| Computer-Aided Design/2003 Volume 35/9/A-hybrid-approach-to-feature-segmentation-of-triangle-meshes.pdf |
420 KB |
| Computer-Aided Design/2003 Volume 35/9/A-tolerant-approach-to-reconstruct-topology-from-unorganized-trimmed-surfaces.pdf |
308 KB |
| Computer-Aided Design/2003 Volume 35/9/Algorithms-for-selecting-cutters-in-multi-part-milling-problems.pdf |
963 KB |
| Computer-Aided Design/2003 Volume 35/9/CAD-2004.pdf |
276 KB |
| Computer-Aided Design/2003 Volume 35/9/Calendar.pdf |
33 KB |
| Computer-Aided Design/2003 Volume 35/9/Contour-parallel-offset-machining-without-tool-retractions.pdf |
990 KB |
| Computer-Aided Design/2003 Volume 35/9/Forthcoming-Papers.pdf |
34 KB |
| Computer-Aided Design/2003 Volume 35/9/Progressive-sharing-of-modules-among-product-variants.pdf |
756 KB |
| Computer-Aided Design/2003 Volume 35/9/Tool-path-regeneration-for-mold-design-modification.pdf |
712 KB |
| Computer-Aided Design/2003 Volume 35/9/Using-low-discrepancy-sequences-and-the-Crofton-formula-to-compute-surface-areas-of-geometric-models.pdf |
469 KB |
| Computer-Aided Design/2004 Volume 36/1/A-mesh-reconstruction-algorithm-driven-by-an-intrinsic-property-of-a-point-cloud.pdf |
587 KB |
| Computer-Aided Design/2004 Volume 36/1/A-study-on-a-generalized-parametric-interpolator-with-real-time-jerk-limited-acceleration.pdf |
365 KB |
| Computer-Aided Design/2004 Volume 36/1/A-Unified-and-Elegant-Derivation-of-Bezier,-B-spline,-and-other-CAGD-Concepts-Bezier-and-B-spline-Techniques,-H.-Prautzsch,-W.-Boehm,-M.-Paluszny-(Eds.);-Springer,-Berlin,-2002,-304-pages,-ISBN-3-540-4376.pdf |
42 KB |
| Computer-Aided Design/2004 Volume 36/1/Aesthetic-and-functional-analysis-for-product-model-validation-in-reverse-engineering-applications.pdf |
634 KB |
| Computer-Aided Design/2004 Volume 36/1/CAD-modeling-for-the-components-made-of-multi-heterogeneous-materials-and-smart-materials.pdf |
508 KB |
| Computer-Aided Design/2004 Volume 36/1/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/1/Call-for-papers.pdf |
37 KB |
| Computer-Aided Design/2004 Volume 36/1/Exploring-the-Future-of-Design-Formal-Engineering-Design-Synthesis,-Erik-K.-Antonsson,-Jonathan-Cagan-(Eds.);-Cambridge-University-Press,-Cambridge-UK,-2001,-496-pages,-hardbound,-ISBN-0-521-79247-9-([pou.pdf |
43 KB |
| Computer-Aided Design/2004 Volume 36/1/ForthcomingRecent-special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/1/Geometric-mouldability-analysis-by-geometric-reasoning-and-fuzzy-decision-making.pdf |
379 KB |
| Computer-Aided Design/2004 Volume 36/1/Smoothing-haptic-interaction-using-molecular-force-calculations.pdf |
1.2 MB |
| Computer-Aided Design/2004 Volume 36/1/Volumetric-feature-recognition-for-machining-components-with-freeform-surfaces.pdf |
1.1 MB |
| Computer-Aided Design/2004 Volume 36/10/A-concurrent-engineering-oriented-design-database-representation-model.pdf |
790 KB |
| Computer-Aided Design/2004 Volume 36/10/A-geometric-approach-to-the-offsetting-of-profiles-on-three-dimensional-surfaces.pdf |
752 KB |
| Computer-Aided Design/2004 Volume 36/10/A-hierarchically-structured-and-constraint-based-data-model-for-intuitive-and-precise-solid-modeling-in-a-virtual-reality-environment.pdf |
1.3 MB |
| Computer-Aided Design/2004 Volume 36/10/Accurate-tool-position-for-five-axis-ruled-surface-machining-by-swept-envelope-approach.pdf |
413 KB |
| Computer-Aided Design/2004 Volume 36/10/An-approach-for-feature-semantics-recognition-in-geometric-models.pdf |
625 KB |
| Computer-Aided Design/2004 Volume 36/10/Calendar.pdf |
32 KB |
| Computer-Aided Design/2004 Volume 36/10/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/10/Multiple-view-feature-modelling-for-integral-product-development.pdf |
817 KB |
| Computer-Aided Design/2004 Volume 36/10/Solving-CSG-equations-for-checking-equivalency-between-two-different-geometric-models.pdf |
706 KB |
| Computer-Aided Design/2004 Volume 36/11/A-shape-design-system-using-volumetric-implicit-PDEs.pdf |
638 KB |
| Computer-Aided Design/2004 Volume 36/11/Any-open-bounded-subset-of-has-the-same-homotopy-type-as-its-medial-axis.pdf |
342 KB |
| Computer-Aided Design/2004 Volume 36/11/Approximation-by-skin-surfaces.pdf |
341 KB |
| Computer-Aided Design/2004 Volume 36/11/Calendar.pdf |
32 KB |
| Computer-Aided Design/2004 Volume 36/11/Editorial-to-special-issue-on-solid-modeling-theory-and-applications.pdf |
46 KB |
| Computer-Aided Design/2004 Volume 36/11/Fast-swept-volume-approximation-of-complex-polyhedral-models.pdf |
639 KB |
| Computer-Aided Design/2004 Volume 36/11/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/11/Isotopic-approximations-and-interval-solids.pdf |
336 KB |
| Computer-Aided Design/2004 Volume 36/11/Shape-retrieval-using-3D-Zernike-descriptors.pdf |
335 KB |
| Computer-Aided Design/2004 Volume 36/11/Three-dimensional-halfspace-constructive-solid-geometry-tree-construction-from-implicit-boundary-representations.pdf |
461 KB |
| Computer-Aided Design/2004 Volume 36/12/A-new-format-for-5-axis-tool-path-computation,-using-Bspline-curves.pdf |
396 KB |
| Computer-Aided Design/2004 Volume 36/12/Automatic-G1-arc-spline-interpolation-for-closed-point-set.pdf |
301 KB |
| Computer-Aided Design/2004 Volume 36/12/Calendar.pdf |
32 KB |
| Computer-Aided Design/2004 Volume 36/12/Error-bounded-biarc-approximation-of-planar-curves.pdf |
226 KB |
| Computer-Aided Design/2004 Volume 36/12/Feature-based-design-for-heterogeneous-objects.pdf |
839 KB |
| Computer-Aided Design/2004 Volume 36/12/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/12/Geometric-algorithms-for-automated-design-of-rotary-platen-multi-shot-molds.pdf |
749 KB |
| Computer-Aided Design/2004 Volume 36/12/Geometry-of-inhibition-and-activation-in-kinematic-waves.pdf |
586 KB |
| Computer-Aided Design/2004 Volume 36/12/Methods-for-feature-based-design-of-heterogeneous-solids.pdf |
750 KB |
| Computer-Aided Design/2004 Volume 36/12/Modifying-free-formed-NURBS-curves-and-surfaces-for-offsetting-without-local-self-intersection.pdf |
322 KB |
| Computer-Aided Design/2004 Volume 36/12/Optimization-of-rotations-of-a-five-axis-milling-machine-near-stationary-points.pdf |
883 KB |
| Computer-Aided Design/2004 Volume 36/12/Putting-objects-into-a-cylindricalrectangular-bounded-volume.pdf |
842 KB |
| Computer-Aided Design/2004 Volume 36/12/Rough-and-finish-tool-path-generation-for-NC-machining-of-freeform-surfaces-based-on-a-multiresolution-method.pdf |
283 KB |
| Computer-Aided Design/2004 Volume 36/12/Special-issue-on-automated-synthesis-of-human-competitive-designs-by-means-of-genetic-programming.pdf |
41 KB |
| Computer-Aided Design/2004 Volume 36/12/Virtual-DesignWorks--designing-3D-CAD-models-via-haptic-interaction.pdf |
467 KB |
| Computer-Aided Design/2004 Volume 36/13/A-PLaSM-Primer-Geometric-Programming-for-Computer-Aided-Design-Alberto-Paoluzzi;-Wiley,-Chichester,-2003,-776-pages,-ISBN-0-471-89942-9-([pound-sign]65).pdf |
117 KB |
| Computer-Aided Design/2004 Volume 36/13/Automatic-solid-decomposition-and-reduction-for-non-manifold-geometric-model-generation.pdf |
734 KB |
| Computer-Aided Design/2004 Volume 36/13/CAD'04-Report.pdf |
503 KB |
| Computer-Aided Design/2004 Volume 36/13/cad.pdf |
98 KB |
| Computer-Aided Design/2004 Volume 36/13/Five-axis-pencil-cut-planning-and-virtual-prototyping-with-5-DOF-haptic-interface.pdf |
976 KB |
| Computer-Aided Design/2004 Volume 36/13/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/13/Free-form-surface-inspection-techniques-state-of-the-art-review.pdf |
564 KB |
| Computer-Aided Design/2004 Volume 36/13/Halftoning-colour-volume-datasets-based-on-subdivision.pdf |
241 KB |
| Computer-Aided Design/2004 Volume 36/13/High-accuracy-spline-interpolation-for-5-axis-machining.pdf |
471 KB |
| Computer-Aided Design/2004 Volume 36/13/Local-topological-beautification-of-reverse-engineered-models.pdf |
455 KB |
| Computer-Aided Design/2004 Volume 36/13/More-Productive-with-Internet-Internet-Applications-in-Product-Design-and-Manufacturing,-G.Q.-Huang-and-K.L.-Mak-(Eds);-Springer,-Berlin,-2003,-272-pages,-hardbound,-ISBN-3-540-43465-8,-[pound-sign]-56.pdf |
46 KB |
| Computer-Aided Design/2004 Volume 36/13/NURBS-based-adaptive-slicing-for-efficient-rapid-prototyping.pdf |
718 KB |
| Computer-Aided Design/2004 Volume 36/13/Oriented-bounding-box-and-octree-based-global-interference-detection-in-5-axis-machining-of-free-form-surfaces.pdf |
610 KB |
| Computer-Aided Design/2004 Volume 36/13/Segmentation-of-3D-triangulated-data-points-using-edges-constructed-with-a-C1-discontinuous-surface-fitting.pdf |
599 KB |
| Computer-Aided Design/2004 Volume 36/14/cad.pdf |
185 KB |
| Computer-Aided Design/2004 Volume 36/14/Editorial-to-special-issue-CAD-education.pdf |
61 KB |
| Computer-Aided Design/2004 Volume 36/14/Education-and-training-for-CAD-in-the-auto-industry.pdf |
106 KB |
| Computer-Aided Design/2004 Volume 36/14/Education-driven-research-in-CAD.pdf |
452 KB |
| Computer-Aided Design/2004 Volume 36/14/Engineers'-CAx-education--it's-not-only-CAD.pdf |
240 KB |
| Computer-Aided Design/2004 Volume 36/14/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/14/Teaching-computer-game-design-and-construction.pdf |
311 KB |
| Computer-Aided Design/2004 Volume 36/14/Teaching-meshes,-subdivision-and-multiresolution-techniques.pdf |
840 KB |
| Computer-Aided Design/2004 Volume 36/14/Today's-students,-tomorrow's-engineers-an-industrial-perspective-on-CAD-education.pdf |
144 KB |
| Computer-Aided Design/2004 Volume 36/14/Turtle-geometry-in-computer-graphics-and-computer-aided-design.pdf |
267 KB |
| Computer-Aided Design/2004 Volume 36/14/Volume-36-Index.pdf |
92 KB |
| Computer-Aided Design/2004 Volume 36/2/A-coordinate-system-associated-with-points-scattered-on-a-surface.pdf |
525 KB |
| Computer-Aided Design/2004 Volume 36/2/A-multi-resolution-topological-representation-for-non-manifold-meshes.pdf |
617 KB |
| Computer-Aided Design/2004 Volume 36/2/Approximate-medial-axis-as-a-Voronoi-subcomplex.pdf |
246 KB |
| Computer-Aided Design/2004 Volume 36/2/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/2/Call-for-papers-Bio-CAD.pdf |
37 KB |
| Computer-Aided Design/2004 Volume 36/2/Editorial.pdf |
39 KB |
| Computer-Aided Design/2004 Volume 36/2/ESOLID--a-system-for-exact-boundary-evaluation.pdf |
500 KB |
| Computer-Aided Design/2004 Volume 36/2/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/2/Linear-one-sided-stability-of-MAT-for-weakly-injective-3D-domain.pdf |
740 KB |
| Computer-Aided Design/2004 Volume 36/2/Revisiting-decomposition-analysis-of-geometric-constraint-graphs.pdf |
651 KB |
| Computer-Aided Design/2004 Volume 36/2/Solving-spatial-basic-geometric-constraint-configurations-with-locus-intersection.pdf |
314 KB |
| Computer-Aided Design/2004 Volume 36/3/A-cellular-topology-based-approach-to-generating-progressive-solid-models-from-feature-centric-models.pdf |
688 KB |
| Computer-Aided Design/2004 Volume 36/3/Automatic-hexahedral-mesh-generation-for-multi-domain-composite-models-using-a-hybrid-projective-grid-based-method.pdf |
949 KB |
| Computer-Aided Design/2004 Volume 36/3/CAD'04.pdf |
228 KB |
| Computer-Aided Design/2004 Volume 36/3/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/3/Choosing-consistent-constraints-for-beautification-of-reverse-engineered-geometric-models.pdf |
453 KB |
| Computer-Aided Design/2004 Volume 36/3/Forthcoming-Special.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/3/Geometric-algorithms-for-automated-design-of-multi-piece-permanent-molds.pdf |
886 KB |
| Computer-Aided Design/2004 Volume 36/3/Modelling-cloud-data-using-an-adaptive-slicing-approach.pdf |
510 KB |
| Computer-Aided Design/2004 Volume 36/3/Sculptured-surface-machining-using-triangular-mesh-slicing.pdf |
874 KB |
| Computer-Aided Design/2004 Volume 36/3/Triple-tangent-flank-milling-of-ruled-surfaces.pdf |
314 KB |
| Computer-Aided Design/2004 Volume 36/4/3D-surface-filtering-using-spherical-harmonics.pdf |
597 KB |
| Computer-Aided Design/2004 Volume 36/4/Boolean-operations-for-3D-simulation-of-CNC-machining-of-drilling-tools.pdf |
450 KB |
| Computer-Aided Design/2004 Volume 36/4/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/4/Editorial-to-Industrial-Geometry.pdf |
47 KB |
| Computer-Aided Design/2004 Volume 36/4/Exact-and-approximate-computation-of-B-spline-curves-on-surfaces.pdf |
458 KB |
| Computer-Aided Design/2004 Volume 36/4/ForthcomingRecent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/4/Generating-tool-paths-on-surfaces-for-a-numerically-controlled-calotte-cutting-system.pdf |
266 KB |
| Computer-Aided Design/2004 Volume 36/4/Making-constraint-solvers-more-usable-overconstraint-problem.pdf |
1.4 MB |
| Computer-Aided Design/2004 Volume 36/4/Modeling-buckled-developable-surfaces-by-triangulation.pdf |
1020 KB |
| Computer-Aided Design/2004 Volume 36/4/Modifying-CADCAM-surfaces-according-to-displacements-prescribed-at-a-finite-set-of-points.pdf |
203 KB |
| Computer-Aided Design/2004 Volume 36/4/Reconstruction-of-piecewise-planar-objects-from-point-clouds.pdf |
334 KB |
| Computer-Aided Design/2004 Volume 36/5/A-practical-construction-of-G1-smooth-biquintic-B-spline-surfaces-over-arbitrary-topology.pdf |
361 KB |
| Computer-Aided Design/2004 Volume 36/5/A-virtual-prototyping-system-for-rapid-product-development.pdf |
750 KB |
| Computer-Aided Design/2004 Volume 36/5/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/5/Computer-modeling-approach-for-microsphere-packed-bone-scaffold.pdf |
583 KB |
| Computer-Aided Design/2004 Volume 36/5/Constrained-shape-modification-of-cubic-B-spline-curves-by-means-of-knots.pdf |
291 KB |
| Computer-Aided Design/2004 Volume 36/5/Constructive-solid-analysis-a-hierarchical,-geometry-based-meshless-analysis-procedure-for-integrated-design-and-analysis.pdf |
337 KB |
| Computer-Aided Design/2004 Volume 36/5/Curve-fitting-and-fairing-using-conic-splines.pdf |
291 KB |
| Computer-Aided Design/2004 Volume 36/5/Forthcoming--REcent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/5/Interactive-examination-of-surface-quality-on-car-bodies.pdf |
802 KB |
| Computer-Aided Design/2004 Volume 36/5/Parametric-representation-of-a-surface-pencil-with-a-common-spatial-geodesic.pdf |
437 KB |
| Computer-Aided Design/2004 Volume 36/6/A-direct-approach-for-subdivision-surface-fitting-from-a-dense-triangle-mesh.pdf |
462 KB |
| Computer-Aided Design/2004 Volume 36/6/Applying-knowledge-to-reverse-engineering-problems.pdf |
684 KB |
| Computer-Aided Design/2004 Volume 36/6/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/6/Editorial-to-Geometric-Modeling-and-Processing-2002.pdf |
46 KB |
| Computer-Aided Design/2004 Volume 36/6/Forthcoming-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/6/Information-models-of-layout-constraints-for-product-life-cycle-management-a-solid-modelling-approach.pdf |
1.4 MB |
| Computer-Aided Design/2004 Volume 36/6/Mapping-2D-midship-drawings-into-a-3D-ship-hull-model-based-on-STEP-AP218.pdf |
680 KB |
| Computer-Aided Design/2004 Volume 36/6/Segmentation-methods-for-smooth-point-regions-of-conventional-engineering-objects.pdf |
580 KB |
| Computer-Aided Design/2004 Volume 36/7/Adding-draft-angles-on-mechanical-components-containing-constant-radius-blending-surfaces.pdf |
944 KB |
| Computer-Aided Design/2004 Volume 36/7/Automated-tool-sequence-selection-for-3-axis-machining-of-free-form-pockets.pdf |
492 KB |
| Computer-Aided Design/2004 Volume 36/7/Automatic-mesh-generation-and-modification-techniques-for-mixed-quadrilateral-and-hexahedral-element-meshes-of-non-manifold-models.pdf |
852 KB |
| Computer-Aided Design/2004 Volume 36/7/Calendar.pdf |
34 KB |
| Computer-Aided Design/2004 Volume 36/7/Control-point-adjustment-for-B-spline-curve-approximation.pdf |
482 KB |
| Computer-Aided Design/2004 Volume 36/7/Forthcoming-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/7/Graphics-assisted-Rolling-Ball-Method-for-5-axis-surface-machining.pdf |
436 KB |
| Computer-Aided Design/2004 Volume 36/7/Multiresolution-offsetting-and-loose-convex-hull-clipping-for-2.5D-NC-machining.pdf |
1.1 MB |
| Computer-Aided Design/2004 Volume 36/7/Parameterization-of-clouds-of-unorganized-points-using-dynamic-base-surfaces.pdf |
1.2 MB |
| Computer-Aided Design/2004 Volume 36/8/3D-clipping-algorithm-for-feature-mapping-across-domains.pdf |
1.6 MB |
| Computer-Aided Design/2004 Volume 36/8/A-gap-based-approach-to-capture-fitting-conditions-for-mechanical-assembly.pdf |
302 KB |
| Computer-Aided Design/2004 Volume 36/8/A-single-solution-method-for-converting-2D-assembly-drawings-to-3D-part-drawings.pdf |
334 KB |
| Computer-Aided Design/2004 Volume 36/8/A-surface-based-approach-to-recognition-of-geometric-features-for-quality-freeform-surface-machining.pdf |
463 KB |
| Computer-Aided Design/2004 Volume 36/8/Calendar.pdf |
33 KB |
| Computer-Aided Design/2004 Volume 36/8/Customizability-analysis-in-design-for-mass-customization.pdf |
483 KB |
| Computer-Aided Design/2004 Volume 36/8/Developing-distributed-applications-for-integrated-product-and-process-design.pdf |
574 KB |
| Computer-Aided Design/2004 Volume 36/8/Forthcoming-Issue.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/8/Reduce-the-stretch-in-surface-flattening-by-finding-cutting-paths-to-the-surface-boundary.pdf |
1.2 MB |
| Computer-Aided Design/2004 Volume 36/8/Special-issue-on-class-A-surfaces.pdf |
32 KB |
| Computer-Aided Design/2004 Volume 36/9/A-framework-for-a-distributed-CAD-system.pdf |
455 KB |
| Computer-Aided Design/2004 Volume 36/9/Calendar.pdf |
32 KB |
| Computer-Aided Design/2004 Volume 36/9/Design-formalism-for-collaborative-assembly-design.pdf |
1.2 MB |
| Computer-Aided Design/2004 Volume 36/9/Distributed-CAD-for-supporting-Internet-collaborative-design.pdf |
48 KB |
| Computer-Aided Design/2004 Volume 36/9/Efficient-surface-reconstruction-method-for-distributed-CAD.pdf |
694 KB |
| Computer-Aided Design/2004 Volume 36/9/Feature-based-design-in-a-distributed-and-collaborative-environment.pdf |
1.3 MB |
| Computer-Aided Design/2004 Volume 36/9/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2004 Volume 36/9/Geometric-model-simplification-for-distributed-CAD.pdf |
453 KB |
| Computer-Aided Design/2004 Volume 36/9/Internet-enabled-real-time-collaborative-assembly-modeling-via-an-e-Assembly-system-status-and-promise.pdf |
515 KB |
| Computer-Aided Design/2004 Volume 36/9/Role-based-viewing-envelopes-for-information-protection-in-collaborative-modeling.pdf |
754 KB |
| Computer-Aided Design/2004 Volume 36/9/The-incremental-editing-of-faceted-models-in-an-integrated-design-environment.pdf |
618 KB |
| Computer-Aided Design/2005 Volume 37/1/A-multi-material-virtual-prototyping-system.pdf |
1.3 MB |
| Computer-Aided Design/2005 Volume 37/1/A-reverse-engineering-method-based-on-haptic-volume-removing.pdf |
600 KB |
| Computer-Aided Design/2005 Volume 37/1/A-thorough-encyclopaedia-on-geometric-modelling,-its-foundations,-methods-and-applications-Handbook-of-computer-aided-geometric-design,-Gerald-Farin,-Josef-Hoschek,-Myung-Soo-Kim-(Eds.);-Elsevier,-Amsterd.pdf |
45 KB |
| Computer-Aided Design/2005 Volume 37/1/An-effective-modeling-of-single-cores-prostheses-using-geometric-techniques.pdf |
588 KB |
| Computer-Aided Design/2005 Volume 37/1/Computer-aided-characterization-for-effective-mechanical-properties-of-porous-tissue-scaffolds.pdf |
403 KB |
| Computer-Aided Design/2005 Volume 37/1/Drawing-curves-onto-a-cloud-of-points-for-point-based-modelling.pdf |
997 KB |
| Computer-Aided Design/2005 Volume 37/1/Extreme-points-of-a-large-3D-point-set-along-multiple-directions.pdf |
1.2 MB |
| Computer-Aided Design/2005 Volume 37/1/Fast-variational-design-of-multiresolution-curves-and-surfaces-with-B-spline-wavelets.pdf |
302 KB |
| Computer-Aided Design/2005 Volume 37/1/Fidelity-in-visualizing-large-scale-simulations.pdf |
617 KB |
| Computer-Aided Design/2005 Volume 37/1/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/1/Geometric-algorithms-for-rapidly-reconfigurable-mold-manufacturing-of-free-form-objects.pdf |
956 KB |
| Computer-Aided Design/2005 Volume 37/1/Iso-planar-piecewise-linear-NC-tool-path-generation-from-discrete-measured-data-points.pdf |
447 KB |
| Computer-Aided Design/2005 Volume 37/1/Parameterization-and-parametric-design-of-mannequins.pdf |
1.2 MB |
| Computer-Aided Design/2005 Volume 37/10/A-new-approach-to-z-level-contour-machining-of-triangulated-surface-models-using-fillet-endmills.pdf |
807 KB |
| Computer-Aided Design/2005 Volume 37/10/A-new-CAD-mesh-segmentation-method,-based-on-curvature-tensor-analysis.pdf |
700 KB |
| Computer-Aided Design/2005 Volume 37/10/A-new-recognition-model-for-electronic-architectural-drawings.pdf |
1.1 MB |
| Computer-Aided Design/2005 Volume 37/10/An-efficient-sweep-line-Delaunay-triangulation-algorithm.pdf |
587 KB |
| Computer-Aided Design/2005 Volume 37/10/Analysis-of-improved-positioning-in-five-axis-ruled-surface-milling-using-envelope-surface.pdf |
491 KB |
| Computer-Aided Design/2005 Volume 37/10/Calendar.pdf |
32 KB |
| Computer-Aided Design/2005 Volume 37/10/Geometry-based-semantic-ID-for-persistent-and-interoperable-reference-in-feature-based-parametric-modeling.pdf |
911 KB |
| Computer-Aided Design/2005 Volume 37/10/Material-side-tracing-and-curve-refinement-for-pencil-cut-machining-of-complex-polyhedral-models.pdf |
832 KB |
| Computer-Aided Design/2005 Volume 37/10/On-the-normal-vector-estimation-for-point-cloud-data-from-smooth-surfaces.pdf |
407 KB |
| Computer-Aided Design/2005 Volume 37/10/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/10/Triangular-mesh-offset-for-generalized-cutter.pdf |
1.2 MB |
| Computer-Aided Design/2005 Volume 37/11/Application-of-micro-CT-and-computation-modeling-in-bone-tissue-engineering.pdf |
898 KB |
| Computer-Aided Design/2005 Volume 37/11/Approach-of-heterogeneous-bio-modeling-based-on-material-features.pdf |
1 MB |
| Computer-Aided Design/2005 Volume 37/11/Bayesian-computer-aided-experimental-design-of-heterogeneous-scaffolds-for-tissue-engineering.pdf |
659 KB |
| Computer-Aided Design/2005 Volume 37/11/Bio-CAD-modeling-and-its-applications-in-computer-aided-tissue-engineering.pdf |
1.4 MB |
| Computer-Aided Design/2005 Volume 37/11/Bio-CAD.pdf |
47 KB |
| Computer-Aided Design/2005 Volume 37/11/Creation-of-a-unit-block-library-of-architectures-for-use-in-assembled-scaffold-engineering.pdf |
468 KB |
| Computer-Aided Design/2005 Volume 37/11/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/11/Reverse-deduction-of-virtual-chromosomes-of-manufactured-products-for-their-gene-engineering-based-innovative-design.pdf |
271 KB |
| Computer-Aided Design/2005 Volume 37/11/Special-Issue-of-Computer-Aided-Design-Journal-Shape-Similarity-Detection-and-Search-for-CADCAE-Applications.pdf |
30 KB |
| Computer-Aided Design/2005 Volume 37/11/Surface-microtopography-design-and-manufacturing-through-topography-descriptors-an-application-to-prosthetic-implant-surfaces.pdf |
517 KB |
| Computer-Aided Design/2005 Volume 37/11/Theories-and-algorithms-for-3-D-root-canal-model-construction.pdf |
822 KB |
| Computer-Aided Design/2005 Volume 37/12/Deployment-of-an-AEC-industry-sector-product-model.pdf |
613 KB |
| Computer-Aided Design/2005 Volume 37/12/Derivation-of-template-shoe-lasts-for-efficient-fabrication-of-custom-ordered-shoe-lasts.pdf |
752 KB |
| Computer-Aided Design/2005 Volume 37/12/Efficiency-of-boundary-evaluation-for-a-cellular-model.pdf |
615 KB |
| Computer-Aided Design/2005 Volume 37/12/Equal-distance-offset-approach-to-representing-and-process-planning-for-solid-freeform-fabrication-of-functionally-graded-materials.pdf |
598 KB |
| Computer-Aided Design/2005 Volume 37/12/Frontal-geometry-from-sketches-of-engineering-objects-is-line-labelling-necessary.pdf |
355 KB |
| Computer-Aided Design/2005 Volume 37/12/Improved-positioning-of-cylindrical-cutter-for-flank-milling-ruled-surfaces.pdf |
467 KB |
| Computer-Aided Design/2005 Volume 37/12/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/12/Special-Issue-of-the-Computer-Aided-Design-Journal--ElsevierMicro-Nano-Technology-Applications-of-CADCAMCAE.pdf |
28 KB |
| Computer-Aided Design/2005 Volume 37/12/Techniques-for-accelerating-B-rep-based-parallel-machining-simulation.pdf |
565 KB |
| Computer-Aided Design/2005 Volume 37/12/Towards-the-standardized-exchange-of-parameterized-feature-based-CAD-models.pdf |
315 KB |
| Computer-Aided Design/2005 Volume 37/13/A-constraint-solver-to-define-correctly-dimensioned-and-overdimensioned-parts.pdf |
815 KB |
| Computer-Aided Design/2005 Volume 37/13/A-product-information-modeling-framework-for-product-lifecycle-management.pdf |
788 KB |
| Computer-Aided Design/2005 Volume 37/13/Admissible-transformation-volume-for-part-dimensional-quality-gauging.pdf |
724 KB |
| Computer-Aided Design/2005 Volume 37/13/Announcement-TMCE-2006.pdf |
104 KB |
| Computer-Aided Design/2005 Volume 37/13/Calendar.pdf |
32 KB |
| Computer-Aided Design/2005 Volume 37/13/Collaborative-product-innovation-integrating-elements-of-CPI-via-PLM-framework.pdf |
432 KB |
| Computer-Aided Design/2005 Volume 37/13/Constructing-medial-axis-transform-of-extruded-and-revolved-3D-objects-with-free-form-boundaries.pdf |
890 KB |
| Computer-Aided Design/2005 Volume 37/13/Euclidean-Voronoi-diagram-of-3D-balls-and-its-computation-via-tracing-edges.pdf |
436 KB |
| Computer-Aided Design/2005 Volume 37/13/Maintaining-associativity-between-form-feature-models.pdf |
1005 KB |
| Computer-Aided Design/2005 Volume 37/13/Recent-Special-issues.pdf |
35 KB |
| Computer-Aided Design/2005 Volume 37/13/Reconstruction-of-3D-interacting-solids-of-revolution-from-2D-orthographic-views.pdf |
637 KB |
| Computer-Aided Design/2005 Volume 37/13/Shape-based-searching-for-product-lifecycle-applications.pdf |
580 KB |
| Computer-Aided Design/2005 Volume 37/14/Calendar.pdf |
33 KB |
| Computer-Aided Design/2005 Volume 37/14/Cross-sectional-design-with-curvature-constraints.pdf |
486 KB |
| Computer-Aided Design/2005 Volume 37/14/Curvature-estimation-scheme-for-triangle-meshes-using-biquadratic-Bezier-patches.pdf |
625 KB |
| Computer-Aided Design/2005 Volume 37/14/Erratum-to-'Deployment-of-an-AEC-industry-sector-product-model-[Computer-Aided-Design-37-(12)-1214-1228]'.pdf |
161 KB |
| Computer-Aided Design/2005 Volume 37/14/Error-measurements-for-flank-milling.pdf |
425 KB |
| Computer-Aided Design/2005 Volume 37/14/Finding-ridges-and-valleys-in-a-discrete-surface-using-a-modified-MLS-approximation.pdf |
710 KB |
| Computer-Aided Design/2005 Volume 37/14/Geometric-algorithms-for-computing-cutter-engagement-functions-in-2.5D-milling-operations.pdf |
630 KB |
| Computer-Aided Design/2005 Volume 37/14/Geometric-and-biomechanical-analysis-for-computer-aided-design-of-assistive-medical-devices.pdf |
668 KB |
| Computer-Aided Design/2005 Volume 37/14/How-to-reduce-mold-design-time.pdf |
71 KB |
| Computer-Aided Design/2005 Volume 37/14/Index-to-volume-37.pdf |
124 KB |
| Computer-Aided Design/2005 Volume 37/14/Manipulation-of-CAD-surface-models-with-haptics-based-on-shape-control-functions.pdf |
537 KB |
| Computer-Aided Design/2005 Volume 37/14/Pencil-curve-detection-from-visibility-data.pdf |
369 KB |
| Computer-Aided Design/2005 Volume 37/14/Recent-Special-Issues.pdf |
37 KB |
| Computer-Aided Design/2005 Volume 37/14/Volume-CAD--CW-complexes-based-approach.pdf |
549 KB |
| Computer-Aided Design/2005 Volume 37/2/A-piecewise-hole-filling-algorithm-in-reverse-engineering.pdf |
573 KB |
| Computer-Aided Design/2005 Volume 37/2/Fair,-G2--and-C2-continuous-circle-splines-for-the-interpolation-of-sparse-data-points.pdf |
613 KB |
| Computer-Aided Design/2005 Volume 37/2/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/2/Geometric-algorithms-for-containment-analysis-of-rotational-parts.pdf |
959 KB |
| Computer-Aided Design/2005 Volume 37/2/Graph-based-feature-recognition-for-injection-moulding-based-on-a-mid-surface-approach.pdf |
401 KB |
| Computer-Aided Design/2005 Volume 37/2/Isoparametric-line-sampling-for-the-inspection-planning-of-sculptured-surfaces.pdf |
553 KB |
| Computer-Aided Design/2005 Volume 37/2/MATHSM-medial-axis-transform-toward-high-speed-machining-of-pockets.pdf |
985 KB |
| Computer-Aided Design/2005 Volume 37/2/Non-self-overlapping-Hermite-interpolation-mapping-a-practical-solution-for-structured-quadrilateral-meshing.pdf |
797 KB |
| Computer-Aided Design/2005 Volume 37/2/Product-portfolio-identification-based-on-association-rule-mining.pdf |
1.1 MB |
| Computer-Aided Design/2005 Volume 37/2/Threading-splines-through-3D-channels.pdf |
446 KB |
| Computer-Aided Design/2005 Volume 37/2/Three-dimensional-anisotropic-geometric-metrics-based-on-local-domain-curvature-and-thickness.pdf |
1.4 MB |
| Computer-Aided Design/2005 Volume 37/2/Tolerance-synthesis-quantifier-notion-and-virtual-boundary.pdf |
522 KB |
| Computer-Aided Design/2005 Volume 37/3/A-hierarchical-representation-for-heterogeneous-object-modeling.pdf |
700 KB |
| Computer-Aided Design/2005 Volume 37/3/A-level-set-based-variational-method-for-design-and-optimization-of-heterogeneous-objects.pdf |
1007 KB |
| Computer-Aided Design/2005 Volume 37/3/Computer-aided-design-of-porous-artifacts.pdf |
577 KB |
| Computer-Aided Design/2005 Volume 37/3/Feature-based-design-and-material-blending-for-free-form-heterogeneous-object-modeling.pdf |
989 KB |
| Computer-Aided Design/2005 Volume 37/3/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/3/Heterogeneous-object-models-and-their-applications.pdf |
42 KB |
| Computer-Aided Design/2005 Volume 37/4/A-parametric-feature-based-CAD-system-for-reproducing-traditional-pierced-jewellery.pdf |
1.5 MB |
| Computer-Aided Design/2005 Volume 37/4/Announcement.pdf |
37 KB |
| Computer-Aided Design/2005 Volume 37/4/Biarc-approximation-of-polygons-within-asymmetric-tolerance-bands.pdf |
657 KB |
| Computer-Aided Design/2005 Volume 37/4/Call-For-Papers-6th-International-Conference.pdf |
30 KB |
| Computer-Aided Design/2005 Volume 37/4/Decomposing-the-problem-of-constrained-surface-fitting-in-reverse-engineering.pdf |
584 KB |
| Computer-Aided Design/2005 Volume 37/4/Direct-slicing-of-STEP-based-NURBS-models-for-layered-manufacturing.pdf |
656 KB |
| Computer-Aided Design/2005 Volume 37/4/Floor,-wall-and-ceiling-approach-for-ball-end-tool-pocket-machining.pdf |
786 KB |
| Computer-Aided Design/2005 Volume 37/4/Forthcoming--Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/4/Hollowing-objects-with-uniform-wall-thickness.pdf |
1.1 MB |
| Computer-Aided Design/2005 Volume 37/4/Hybrid-cutting-simulation-via-discrete-vector-model.pdf |
753 KB |
| Computer-Aided Design/2005 Volume 37/4/Ten-challenges-in-computer-aided-design.pdf |
167 KB |
| Computer-Aided Design/2005 Volume 37/5/Advances-in-collaborative-CAD-the-state-of-the-art.pdf |
386 KB |
| Computer-Aided Design/2005 Volume 37/5/Feature-extraction-from-large-CAD-databases-using-genetic-algorithm.pdf |
498 KB |
| Computer-Aided Design/2005 Volume 37/5/Handling-sectional-views-in-volume-based-approach-to-automatically-construct-3D-solid-from-2D-views.pdf |
421 KB |
| Computer-Aided Design/2005 Volume 37/5/Intersecting-a-freeform-surface-with-a-general-swept-surface.pdf |
771 KB |
| Computer-Aided Design/2005 Volume 37/5/On-the-development-of-a-haptic-system-for-rapid-product-development.pdf |
760 KB |
| Computer-Aided Design/2005 Volume 37/5/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/5/Special-section-on-geometric-modeling-and-processing.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/5/Surface-interpolation-of-meshes-by-geometric-subdivision.pdf |
475 KB |
| Computer-Aided Design/2005 Volume 37/5/Three-dimensional-shape-searching-state-of-the-art-review-and-future-trends.pdf |
604 KB |
| Computer-Aided Design/2005 Volume 37/5/Tolerance-envelopes-of-planar-mechanical-parts-with-parametric-tolerances.pdf |
572 KB |
| Computer-Aided Design/2005 Volume 37/6/3D-virtual-apparel-design-for-industrial-applications.pdf |
997 KB |
| Computer-Aided Design/2005 Volume 37/6/CAD-methods-in-garment-design.pdf |
45 KB |
| Computer-Aided Design/2005 Volume 37/6/From-early-virtual-garment-simulation-to-interactive-fashion-design.pdf |
956 KB |
| Computer-Aided Design/2005 Volume 37/6/Pattern-flattening-for-orthotropic-materials.pdf |
1.3 MB |
| Computer-Aided Design/2005 Volume 37/6/Reactive-2D3D-garment-pattern-design-modification.pdf |
393 KB |
| Computer-Aided Design/2005 Volume 37/6/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/6/Research-problems-in-clothing-simulation.pdf |
219 KB |
| Computer-Aided Design/2005 Volume 37/7/A-cutting-tool-dependent-approach-for-partitioning-of-sculptured-surface.pdf |
602 KB |
| Computer-Aided Design/2005 Volume 37/7/A-valiant-attempt-at-defining-PLMProduct-Lifecycle-Management,-Antti-Saaksvuori-and-Anselmi-Immonen;-Springer,-Berlin,-Heidelberg,-2004,-220-pages,-ISBN-3-540-40373-6-([pound-sign]34.50).pdf |
63 KB |
| Computer-Aided Design/2005 Volume 37/7/Arc-intersect-method-for-5-axis-tool-positioning.pdf |
804 KB |
| Computer-Aided Design/2005 Volume 37/7/Automatic-layout-design-of-plastic-injection-mould-cooling-system.pdf |
981 KB |
| Computer-Aided Design/2005 Volume 37/7/CAD-tools-for-aesthetic-engineering.pdf |
741 KB |
| Computer-Aided Design/2005 Volume 37/7/Design-automation-for-customized-apparel-products.pdf |
1.2 MB |
| Computer-Aided Design/2005 Volume 37/7/Haptic-function-evaluation-of-multi-material-part-design.pdf |
595 KB |
| Computer-Aided Design/2005 Volume 37/7/Industrial-geometry-recent-advances-and-applications-in-CAD.pdf |
1.2 MB |
| Computer-Aided Design/2005 Volume 37/7/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2005 Volume 37/7/Reduction-of-post-processing-for-stereolithography-systems-by-fabrication-direction-optimization.pdf |
1.1 MB |
| Computer-Aided Design/2005 Volume 37/7/Subdivision-surfaces-for-CAD--an-overview.pdf |
841 KB |
| Computer-Aided Design/2005 Volume 37/8/A-Delaunay-based-region-growing-approach-to-surface-reconstruction-from-unorganized-points.pdf |
794 KB |
| Computer-Aided Design/2005 Volume 37/8/Adaptive-knot-placement-in-B-spline-curve-approximation.pdf |
182 KB |
| Computer-Aided Design/2005 Volume 37/8/Approximating-centroids-for-the-maximum-intersection-of-spherical-polygons.pdf |
229 KB |
| Computer-Aided Design/2005 Volume 37/8/CAD'04-Special-Issue-modeling-and-geometry-representations-for-CAD.pdf |
37 KB |
| Computer-Aided Design/2005 Volume 37/8/Calendar.pdf |
32 KB |
| Computer-Aided Design/2005 Volume 37/8/Feature-based-decomposition-of-trimmed-surface.pdf |
539 KB |
| Computer-Aided Design/2005 Volume 37/8/Freeform-surface-flattening-based-on-fitting-a-woven-mesh-model.pdf |
1.4 MB |
| Computer-Aided Design/2005 Volume 37/8/Lossless-compression-of-predicted-floating-point-geometry.pdf |
582 KB |
| Computer-Aided Design/2005 Volume 37/8/Modeling-generalized-cylinders-using-direction-map-representation.pdf |
574 KB |
| Computer-Aided Design/2005 Volume 37/8/Modeling-wrinkles-on-smooth-surfaces-for-footwear-design.pdf |
428 KB |
| Computer-Aided Design/2005 Volume 37/8/Optimizing-the-topological-and-combinatorial-complexity-of-isosurfaces.pdf |
506 KB |
| Computer-Aided Design/2005 Volume 37/8/Recent-Special-Issues.pdf |
37 KB |
| Computer-Aided Design/2005 Volume 37/9/A-CAD-CAE-integration-approach-using-feature-based-multi-resolution-and-multi-abstraction-modelling-techniques.pdf |
797 KB |
| Computer-Aided Design/2005 Volume 37/9/A-Web-based-process-planning-optimization-system-for-distributed-design.pdf |
652 KB |
| Computer-Aided Design/2005 Volume 37/9/Block-Cartesian-abstraction-of-a-geometric-model-and-its-application-in-hexahedral-mesh-generation.pdf |
612 KB |
| Computer-Aided Design/2005 Volume 37/9/CAD'04-Special-Issue-Product-design,-integration-and-manufacturing.pdf |
41 KB |
| Computer-Aided Design/2005 Volume 37/9/Calendar.pdf |
32 KB |
| Computer-Aided Design/2005 Volume 37/9/Collaborative-computer-aided-design--research-and-development-status.pdf |
206 KB |
| Computer-Aided Design/2005 Volume 37/9/Configurable-product-views-based-on-geometry-user-requirements.pdf |
522 KB |
| Computer-Aided Design/2005 Volume 37/9/Domain-independent-shell-for-DfM-and-its-application-to-sheet-metal-forming-and-injection-molding.pdf |
1.3 MB |
| Computer-Aided Design/2005 Volume 37/9/Precise-global-collision-detection-in-multi-axis-NC-machining.pdf |
407 KB |
| Computer-Aided Design/2005 Volume 37/9/Recent-Special-Issues.pdf |
37 KB |
| Computer-Aided Design/2005 Volume 37/9/Tool-path-generation-for-clean-up-machining-by-a-curve-based-approach.pdf |
1 MB |
| Computer-Aided Design/2006 Volume 38/1/A-C-tree-decomposition-algorithm-for-2D-and-3D-geometric-constraint-solving.pdf |
311 KB |
| Computer-Aided Design/2006 Volume 38/1/A-quasi-Monte-Carlo-method-for-computing-areas-of-point-sampled-surfaces.pdf |
706 KB |
| Computer-Aided Design/2006 Volume 38/1/Algorithms-for-the-physical-rendering-and-assembly-of-octree-models.pdf |
2.3 MB |
| Computer-Aided Design/2006 Volume 38/1/Apollonius-tenth-problem-via-radius-adjustment-and-Mo[combining-diaeresis-above]bius-transformations.pdf |
230 KB |
| Computer-Aided Design/2006 Volume 38/1/Calendar.pdf |
32 KB |
| Computer-Aided Design/2006 Volume 38/1/Characterization-of-polyhedron-monotonicity.pdf |
164 KB |
| Computer-Aided Design/2006 Volume 38/1/Geometric-constraints-within-feature-hierarchies.pdf |
528 KB |
| Computer-Aided Design/2006 Volume 38/1/Parametric-interpolation-using-sampled-data.pdf |
382 KB |
| Computer-Aided Design/2006 Volume 38/1/Recent-Special-Issues.pdf |
37 KB |
| Computer-Aided Design/2006 Volume 38/10/A-physically-based-method-for-triangulated-surface-flattening.pdf |
1.5 MB |
| Computer-Aided Design/2006 Volume 38/10/Calendar.pdf |
74 KB |
| Computer-Aided Design/2006 Volume 38/10/Computing-minimum-distance-between-two-implicit-algebraic-surfaces.pdf |
932 KB |
| Computer-Aided Design/2006 Volume 38/10/Concurrent-optimal-adjustment-of-nominal-dimensions-and-selection-of-tolerances-considering-alternative-machines.pdf |
1.5 MB |
| Computer-Aided Design/2006 Volume 38/10/Progressive-surface-modelling-scheme-from-unorganised-curves.pdf |
1.9 MB |
| Computer-Aided Design/2006 Volume 38/10/Real-time-NURBS-interpolation-using-FPGA-for-high-speed-motion-control.pdf |
1.2 MB |
| Computer-Aided Design/2006 Volume 38/10/Recent-Special-Issues.pdf |
73 KB |
| Computer-Aided Design/2006 Volume 38/10/Robust-uniform-triangulation-algorithm-for-computer-aided-design.pdf |
1.1 MB |
| Computer-Aided Design/2006 Volume 38/10/Semantic-interoperability-in-building-design-Methods-and-tools.pdf |
3.8 MB |
| Computer-Aided Design/2006 Volume 38/10/Single-set-and-class-of-sets-semantics-for-geometric-models.pdf |
693 KB |
| Computer-Aided Design/2006 Volume 38/11/A-practicable-approach-to-G1-biarc-approximations-for-making-accurate,-smooth-and-non-gouged-profile-features-in-CNC-contouring.pdf |
1.4 MB |
| Computer-Aided Design/2006 Volume 38/11/A-public-fragile-watermarking-scheme-for-3D-model-authentication.pdf |
2.5 MB |
| Computer-Aided Design/2006 Volume 38/11/A-rational-extension-of-Piegl's-method-for-filling-n-sided-holes.pdf |
1.3 MB |
| Computer-Aided Design/2006 Volume 38/11/Calendar.pdf |
74 KB |
| Computer-Aided Design/2006 Volume 38/11/Fast-computation-of-inertia-through-affinely-extended-Euler-tensor.pdf |
839 KB |
| Computer-Aided Design/2006 Volume 38/11/Interaction-interfaces-in-proteins-via-the-Voronoi-diagram-of-atoms.pdf |
1.6 MB |
| Computer-Aided Design/2006 Volume 38/11/Recent-Special-Issues.pdf |
73 KB |
| Computer-Aided Design/2006 Volume 38/11/Three-dimensional-beta-shapes.pdf |
1.1 MB |
| Computer-Aided Design/2006 Volume 38/12/Automatic-least-squares-projection-of-points-onto-point-clouds-with-applications-in-reverse-engineering.pdf |
1.4 MB |
| Computer-Aided Design/2006 Volume 38/12/Calendar.pdf |
76 KB |
| Computer-Aided Design/2006 Volume 38/12/Multi-degree-reduction-of-triangular-Bezier-surfaces-with-boundary-constraints.pdf |
1014 KB |
| Computer-Aided Design/2006 Volume 38/12/Ontology-based-assembly-design-and-information-sharing-for-collaborative-product-development.pdf |
1.5 MB |
| Computer-Aided Design/2006 Volume 38/12/Recent-Special-Issues.pdf |
73 KB |
| Computer-Aided Design/2006 Volume 38/12/Skewed-rotational-symmetry-detection-from-a-2D-line-drawing-of-a-3D-polyhedral-object.pdf |
863 KB |
| Computer-Aided Design/2006 Volume 38/12/Volume,-author-and-keyword-Indexes-to-volume-38.pdf |
161 KB |
| Computer-Aided Design/2006 Volume 38/2/A-topological-hierarchy-based-approach-to-toolpath-planning-for-multi-material-layered-manufacturing.pdf |
1.4 MB |
| Computer-Aided Design/2006 Volume 38/2/An-image-evaluation-approach-for-parameter-based-product-form-and-color-design.pdf |
716 KB |
| Computer-Aided Design/2006 Volume 38/2/Calendar.pdf |
32 KB |
| Computer-Aided Design/2006 Volume 38/2/Constrained-fitting-for-2D-profile-based-reverse-modeling.pdf |
801 KB |
| Computer-Aided Design/2006 Volume 38/2/Field-modeling-with-sampled-distances.pdf |
644 KB |
| Computer-Aided Design/2006 Volume 38/2/Finding-ridges-and-valleys-in-a-discrete-surface-using-a-modified-MLS-approximation-[Computer-Aided-Design-37-(14)-1533-1542].pdf |
35 KB |
| Computer-Aided Design/2006 Volume 38/2/Finding-ridges-and-valleys-in-a-discrete-surface-using-a-modified-MLS-approximation.pdf |
639 KB |
| Computer-Aided Design/2006 Volume 38/2/Internal-architecture-design-and-freeform-fabrication-of-tissue-replacement-structures.pdf |
737 KB |
| Computer-Aided Design/2006 Volume 38/2/New-multiresolution-modeling-techniques-in-CAD.pdf |
365 KB |
| Computer-Aided Design/2006 Volume 38/2/Recent-Special-Issues.pdf |
35 KB |
| Computer-Aided Design/2006 Volume 38/2/Special-Issue-of-Computer-Aided-Design-Human-Modeling-and-Applications.pdf |
40 KB |
| Computer-Aided Design/2006 Volume 38/2/Special-Issue-of-Computer-Aided-Design-Medical-Modeling.pdf |
37 KB |
| Computer-Aided Design/2006 Volume 38/2/Spiral-fashion-embroidery-path-generation-in-embroidery-CAD-systems.pdf |
274 KB |
| Computer-Aided Design/2006 Volume 38/3/A-curvature-estimation-for-pen-input-segmentation-in-sketch-based-modeling.pdf |
698 KB |
| Computer-Aided Design/2006 Volume 38/3/A-new-modeling-interface-for-the-pen-input-displays.pdf |
809 KB |
| Computer-Aided Design/2006 Volume 38/3/A-sweepline-algorithm-for-Euclidean-Voronoi-diagram-of-circles.pdf |
647 KB |
| Computer-Aided Design/2006 Volume 38/3/Calendar.pdf |
32 KB |
| Computer-Aided Design/2006 Volume 38/3/Capturing-aesthetic-intention-during-interactive-evolution.pdf |
673 KB |
| Computer-Aided Design/2006 Volume 38/3/On-visual-similarity-based-2D-drawing-retrieval.pdf |
1 MB |
| Computer-Aided Design/2006 Volume 38/3/Recent-Special-Issues.pdf |
35 KB |
| Computer-Aided Design/2006 Volume 38/3/Trimming-local-and-global-self-intersections-in-offset-curvessurfaces-using-distance-maps.pdf |
2.2 MB |
| Computer-Aided Design/2006 Volume 38/3/Voronoi-diagram-based-tool-path-compensations-for-removing-uncut-material-in-212D-pocket-machining.pdf |
694 KB |
| Computer-Aided Design/2006 Volume 38/4/[epsilon]-Topological-formulation-of-tolerant-solid-modeling.pdf |
334 KB |
| Computer-Aided Design/2006 Volume 38/4/A-constructive-approach-to-calculate-parameter-ranges-for-systems-of-geometric-constraints.pdf |
335 KB |
| Computer-Aided Design/2006 Volume 38/4/An-efficient,-error-bounded-approximation-algorithm-for-simulating-quasi-statics-of-complex-linkages.pdf |
622 KB |
| Computer-Aided Design/2006 Volume 38/4/Call-for-Papers-Human-Modeling-and-Applications.pdf |
42 KB |
| Computer-Aided Design/2006 Volume 38/4/Finding-feasible-mold-parting-directions-using-graphics-hardware.pdf |
643 KB |
| Computer-Aided Design/2006 Volume 38/4/G1-surface-modelling-using-fourth-order-geometric-flows.pdf |
457 KB |
| Computer-Aided Design/2006 Volume 38/4/Geometric-constraint-solving-The-witness-configuration-method.pdf |
434 KB |
| Computer-Aided Design/2006 Volume 38/4/Laplace-Beltrami-spectra-as-`Shape-DNA'-of-surfaces-and-solids.pdf |
988 KB |
| Computer-Aided Design/2006 Volume 38/4/Layered-tetrahedral-meshing-of-thin-walled-solids-for-plastic-injection-molding-FEM.pdf |
1.4 MB |
| Computer-Aided Design/2006 Volume 38/4/Real-time,-dynamic-level-of-detail-management-for-three-axis-NC-milling-simulation.pdf |
901 KB |
| Computer-Aided Design/2006 Volume 38/4/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2006 Volume 38/4/Symposium-on-Solid-and-Physical-Modeling-2005.pdf |
45 KB |
| Computer-Aided Design/2006 Volume 38/5/A-framework-for-an-automotive-body-assembly-process-design-system.pdf |
526 KB |
| Computer-Aided Design/2006 Volume 38/5/A-traceability-information-model-for-CNC-manufacturing.pdf |
826 KB |
| Computer-Aided Design/2006 Volume 38/5/Active-layout-engine-Algorithms-and-applications-in-variable-data-printing.pdf |
906 KB |
| Computer-Aided Design/2006 Volume 38/5/An-example-on-approximation-by-fat-arcs-and-fat-biarcs.pdf |
126 KB |
| Computer-Aided Design/2006 Volume 38/5/Computer-modeling-approach-for-a-novel-internal-architecture-of-artificial-bone.pdf |
501 KB |
| Computer-Aided Design/2006 Volume 38/5/Feature-based-reverse-modeling-strategies.pdf |
3.3 MB |
| Computer-Aided Design/2006 Volume 38/5/Modeling-complex-heterogeneous-objects-with-non-manifold-heterogeneous-cells.pdf |
920 KB |
| Computer-Aided Design/2006 Volume 38/5/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2006 Volume 38/5/Recognition-of-docking-sites-on-a-protein-using-[beta]-shape-based-on-Voronoi-diagram-of-atoms.pdf |
950 KB |
| Computer-Aided Design/2006 Volume 38/5/Region-expansion-for-the-Voronoi-diagram-of-3D-spheres.pdf |
423 KB |
| Computer-Aided Design/2006 Volume 38/5/Robust-parameter-synthesis-for-planar-higher-pair-mechanical-systems.pdf |
460 KB |
| Computer-Aided Design/2006 Volume 38/5/Standardization-and-modularization-driven-by-minimizing-overall-process-effort.pdf |
414 KB |
| Computer-Aided Design/2006 Volume 38/5/Systems-Approach-to-Assembly.pdf |
62 KB |
| Computer-Aided Design/2006 Volume 38/5/Using-invariance-under-the-similarity-group-to-solve-geometric-constraint-systems.pdf |
259 KB |
| Computer-Aided Design/2006 Volume 38/6/Algebraic-and-geometric-approximation-of-waves-among-obstacles.pdf |
421 KB |
| Computer-Aided Design/2006 Volume 38/6/Approximating-curves-and-their-offsets-using-biarcs-and-Pythagorean-hodograph-quintics.pdf |
371 KB |
| Computer-Aided Design/2006 Volume 38/6/Automatic-surface-modelling-of-a-ship-hull.pdf |
481 KB |
| Computer-Aided Design/2006 Volume 38/6/Call-for-Papers-Constrained-Design-of-Curves-and-Surfaces.pdf |
48 KB |
| Computer-Aided Design/2006 Volume 38/6/Call-for-Papers-CURRENT-STATE-AND-FUTURE-OF-PRODUCT-DATA-TECHNOLOGIES.pdf |
47 KB |
| Computer-Aided Design/2006 Volume 38/6/Call-for-Papers-Special-Issue-in-Computer-Aided-Design-Computer-Support-for-Conceptual-Design.pdf |
45 KB |
| Computer-Aided Design/2006 Volume 38/6/Cone-spline-approximation-via-fat-conic-spline-fitting.pdf |
369 KB |
| Computer-Aided Design/2006 Volume 38/6/Constrained-3D-shape-reconstruction-using-a-combination-of-surface-fitting-and-registration.pdf |
783 KB |
| Computer-Aided Design/2006 Volume 38/6/Elliptic-Gabriel-graph-for-finding-neighbors-in-a-point-set-and-its-application-to-normal-vector-estimation.pdf |
654 KB |
| Computer-Aided Design/2006 Volume 38/6/Haptic-sculpting-of-multi-resolution-B-spline-surfaces-with-shaped-tools.pdf |
862 KB |
| Computer-Aided Design/2006 Volume 38/6/Incremental-reconstruction-of-sharp-edges-on-mesh-surfaces.pdf |
1.3 MB |
| Computer-Aided Design/2006 Volume 38/6/Interpolating-G1-Bezier-surfaces-over-irregular-curve-networks-for-ship-hull-design.pdf |
1.4 MB |
| Computer-Aided Design/2006 Volume 38/6/Machining-feature-recognition-and-tool-path-generation-for-3-axis-CNC-milling.pdf |
749 KB |
| Computer-Aided Design/2006 Volume 38/6/Nearly-orthogonal-sampling-and-neural-network-metamodel-driven-conceptual-design-of-multistage-space-launch-vehicle.pdf |
1.3 MB |
| Computer-Aided Design/2006 Volume 38/6/Recent-Special-Issues.pdf |
36 KB |
| Computer-Aided Design/2006 Volume 38/6/Repairing-CAD-model-errors-based-on-the-design-history.pdf |
861 KB |
| Computer-Aided Design/2006 Volume 38/6/STEP-compliant-CNC-system-for-turning-Data-model,-architecture,-and-implementation.pdf |
1.3 MB |
| Computer-Aided Design/2006 Volume 38/7/A-unified-subdivision-approach-for-multi-dimensional-non-manifold-modeling.pdf |
1.6 MB |
| Computer-Aided Design/2006 Volume 38/7/An-autowave-based-methodology-for-deformable-object-simulation.pdf |
1.1 MB |
| Computer-Aided Design/2006 Volume 38/7/Calendar.pdf |
61 KB |
| Computer-Aided Design/2006 Volume 38/7/Meta-ontology-for-automated-information-integration-of-parts-libraries.pdf |
1.1 MB |
| Computer-Aided Design/2006 Volume 38/7/Modeling-and-fabrication-of-artistic-products-based-on-IFS-fractal-representation.pdf |
3.7 MB |
| Computer-Aided Design/2006 Volume 38/7/P-smart--a-virtual-system-for-clothing-thermal-functional-design.pdf |
2.7 MB |
| Computer-Aided Design/2006 Volume 38/7/Quasi-triangulation-and-interworld-data-structure-in-three-dimensions.pdf |
432 KB |
| Computer-Aided Design/2006 Volume 38/7/Recent-Special-Issues.pdf |
61 KB |
| Computer-Aided Design/2006 Volume 38/7/Smooth-blending-of-subdivision-surfaces.pdf |
2.3 MB |
| Computer-Aided Design/2006 Volume 38/7/Surface-fitting-based-on-a-feature-sensitive-parametrization.pdf |
818 KB |
| Computer-Aided Design/2006 Volume 38/8/Automatic-remeshing-by-mapping-a-2D-grid-on-3D-genus-g-meshes-based-on-topological-analysis.pdf |
5.1 MB |
| Computer-Aided Design/2006 Volume 38/8/Boundary-analysis-and-geometric-completion-for-recognition-of-interacting-machining-features.pdf |
1.7 MB |
| Computer-Aided Design/2006 Volume 38/8/Calendar.pdf |
61 KB |
| Computer-Aided Design/2006 Volume 38/8/Comparison-of-FEM-and-BEM-for-interactive-object-simulation.pdf |
1.6 MB |
| Computer-Aided Design/2006 Volume 38/8/Feature-conversion-based-on-decomposition-and-combination-of-swept-volumes.pdf |
4.5 MB |
| Computer-Aided Design/2006 Volume 38/8/Fitting-2D-B-splines-with-draft-angle-to-point-data.pdf |
710 KB |
| Computer-Aided Design/2006 Volume 38/8/Generation-of-functional-tolerancing-based-on-positioning-features.pdf |
4.3 MB |
| Computer-Aided Design/2006 Volume 38/8/Recent-Special-Issues.pdf |
60 KB |
| Computer-Aided Design/2006 Volume 38/8/Solid-reconstruction-using-recognition-of-quadric-surfaces-from-orthographic-views.pdf |
1.3 MB |
| Computer-Aided Design/2006 Volume 38/8/Towards-mass-customized-interoperability.pdf |
2.3 MB |
| Computer-Aided Design/2006 Volume 38/9/Benchmarking-shape-signatures-against-human-perceptions-of-geometric-similarity.pdf |
3.9 MB |
| Computer-Aided Design/2006 Volume 38/9/Calendar.pdf |
74 KB |
| Computer-Aided Design/2006 Volume 38/9/Developing-an-engineering-shape-benchmark-for-CAD-models.pdf |
3.2 MB |
| Computer-Aided Design/2006 Volume 38/9/Introduction-to-shape-similarity-detection-and-search-for-CADCAE-applications.pdf |
108 KB |
| Computer-Aided Design/2006 Volume 38/9/Local-feature-extraction-and-matching-partial-objects.pdf |
4.5 MB |
| Computer-Aided Design/2006 Volume 38/9/Machining-feature-based-similarity-assessment-algorithms-for-prismatic-machined-parts.pdf |
2.5 MB |
| Computer-Aided Design/2006 Volume 38/9/Multiresolutional-similarity-assessment-and-retrieval-of-solid-models-based-on-DBMS.pdf |
1.8 MB |
| Computer-Aided Design/2006 Volume 38/9/Recent-Special-Issues.pdf |
73 KB |
| Computer-Aided Design/2006 Volume 38/9/Similarity-comparison-of-mechanical-parts-to-reuse-existing-designs.pdf |
2.4 MB |
| Computer-Aided Design/2006 Volume 38/9/Sub-part-correspondence-by-structural-descriptors-of-3D-shapes.pdf |
1.3 MB |
| Computer-Aided Design/2007 Volume 39/1/A-formal-theory-for-estimating-defeaturing-induced-engineering-analysis-errors.pdf |
614 KB |
| Computer-Aided Design/2007 Volume 39/1/Calendar.pdf |
85 KB |
| Computer-Aided Design/2007 Volume 39/1/Direct-extraction-of-surface-meshes-from-implicitly-represented-heterogeneous-volumes.pdf |
3.1 MB |
| Computer-Aided Design/2007 Volume 39/1/Fairing-point-sets-using-curvature.pdf |
512 KB |
| Computer-Aided Design/2007 Volume 39/1/Recent-Special-Issues.pdf |
82 KB |
| Computer-Aided Design/2007 Volume 39/1/Reincarnation-of-G-code-based-part-programs-into-STEP-NC-for-turning-applications.pdf |
2.8 MB |
| Computer-Aided Design/2007 Volume 39/1/Statistical-analysis-of-the-stereolithographic-process-to-improve-the-accuracy.pdf |
661 KB |
| Computer-Aided Design/2007 Volume 39/1/The-application-of-fractal-geometry-to-the-design-of-grid-or-reticulated-shell-structures.pdf |
2.3 MB |
| Computer-Aided Design/2007 Volume 39/1/The-spherical-visibility-map.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/1/Woven-model-based-geometric-design-of-elastic-medical-braces.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/10/Adaptive-generation-of-hexahedral-element-mesh-using-an-improved-grid-based-method.pdf |
3.4 MB |
| Computer-Aided Design/2007 Volume 39/10/Automatic-generation-of-gouge-free-and-angular-velocity-compliant-five-axis-toolpath.pdf |
2.7 MB |
| Computer-Aided Design/2007 Volume 39/10/Calendar.pdf |
88 KB |
| Computer-Aided Design/2007 Volume 39/10/Detecting-and-quantifying-envelope-singularities-in-the-plane.pdf |
1.5 MB |
| Computer-Aided Design/2007 Volume 39/10/Geometric-assessment-for-fabrication-of-large-hull-pieces-in-shipbuilding.pdf |
1.8 MB |
| Computer-Aided Design/2007 Volume 39/10/Geometrical-algorithms-for-automated-design-of-side-actions-in-injection-moulding-of-complex-parts.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/10/Multi-objective-optimization-of-an-auto-panel-drawing-die-face-design-by-mesh-morphing.pdf |
1.4 MB |
| Computer-Aided Design/2007 Volume 39/10/Optimal-design-of-flat-patterns-for-3D-folded-structures-by-unfolding-with-topological-validation.pdf |
2.4 MB |
| Computer-Aided Design/2007 Volume 39/10/Quasi-developable-B-spline-surfaces-in-ship-hull-design.pdf |
1.5 MB |
| Computer-Aided Design/2007 Volume 39/10/Recent-Special-Issue.pdf |
85 KB |
| Computer-Aided Design/2007 Volume 39/11/A-geometric-approach-to-boundary-conformed-toolpath-generation.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/11/A-practical-approach-to-generating-steepest-ascent-tool-paths-for-three-axis-finish-milling-of-compound-NURBS-surfaces.pdf |
2.5 MB |
| Computer-Aided Design/2007 Volume 39/11/An-accurate-sampling-based-method-for-approximating-geometry.pdf |
1.8 MB |
| Computer-Aided Design/2007 Volume 39/11/Calendar.pdf |
88 KB |
| Computer-Aided Design/2007 Volume 39/11/Constraint-based-beautification-and-dimensioning-of-3D-polyhedral-models-reconstructed-from-2D-sketches.pdf |
897 KB |
| Computer-Aided Design/2007 Volume 39/11/Dynamic-B-spline-surface-reconstruction-Closing-the-sensing-and-modeling-loop-in-3D-digitization.pdf |
3.3 MB |
| Computer-Aided Design/2007 Volume 39/11/Erratum-to-'G2-surface-modeling-using-minimal-mean-curvature-variation-flow'-[Comput.-Aided-Design-39-(5)-(2007)-342-351].pdf |
127 KB |
| Computer-Aided Design/2007 Volume 39/11/Exact-and-efficient-construction-of-Minkowski-sums-of-convex-polyhedra-with-applications.pdf |
2.1 MB |
| Computer-Aided Design/2007 Volume 39/11/Generating-Gn-parametric-blending-surfaces-based-on-partial-reparameterization-of-base-surfaces.pdf |
1.8 MB |
| Computer-Aided Design/2007 Volume 39/11/Recent-Special-Issue.pdf |
85 KB |
| Computer-Aided Design/2007 Volume 39/11/Simultaneous-blending-of-convex-polyhedra-by-algebraic-splines.pdf |
973 KB |
| Computer-Aided Design/2007 Volume 39/11/The-sweep-plane-algorithm-for-global-collision-detection-with-workpiece-geometry-update-for-five-axis-NC-machining.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/12/A-methodology-to-redesign-heterogeneous-product-portfolios-as-homogeneous-product-families.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/12/Adaptive-patch-based-mesh-fitting-for-reverse-engineering.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/12/Calendar.pdf |
84 KB |
| Computer-Aided Design/2007 Volume 39/12/Computer-Aided-Design-Referees-2007.pdf |
103 KB |
| Computer-Aided Design/2007 Volume 39/12/Constrained-curve-drawing-using-trigonometric-splines-having-shape-parameters.pdf |
528 KB |
| Computer-Aided Design/2007 Volume 39/12/Efficiently-determining-a-locally-exact-shortest-path-on-polyhedral-surfaces.pdf |
2.5 MB |
| Computer-Aided Design/2007 Volume 39/12/Improved-bounds-on-partial-derivatives-of-rational-triangular-Bezier-surfaces.pdf |
259 KB |
| Computer-Aided Design/2007 Volume 39/12/Modeling-of-plasma-spraying-process-to-manufacture-hybrid-materials.pdf |
2.3 MB |
| Computer-Aided Design/2007 Volume 39/12/Molecular-surfaces-on-proteins-via-beta-shapes.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/12/Moving-parabolic-approximation-of-point-clouds.pdf |
6.2 MB |
| Computer-Aided Design/2007 Volume 39/12/On-the-application-of-CAD-technology-for-the-synthesis-of-spatial-revolute-revolute-dyads.pdf |
672 KB |
| Computer-Aided Design/2007 Volume 39/12/Recent-Special-Issue.pdf |
81 KB |
| Computer-Aided Design/2007 Volume 39/12/Steven-M.-LaValle,-A-tour-de-force-of-planning-,-Planning-algorithms,-Cambridge-University-Press-(2006)-ISBN-0-521-86205-1,-p.-826-[pound-sign]35.00$60.00.pdf |
209 KB |
| Computer-Aided Design/2007 Volume 39/2/A-B-spline-based-approach-to-heterogeneous-objects-design-and-analysis.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/2/A-digital-mock-up-visualization-system-capable-of-processing-giga-scale-CAD-models.pdf |
1.4 MB |
| Computer-Aided Design/2007 Volume 39/2/A-note-on-the-FRPDF-distribution.pdf |
174 KB |
| Computer-Aided Design/2007 Volume 39/2/A-topologically-robust-algorithm-for-Boolean-operations-on-polyhedral-shapes-using-approximate-arithmetic.pdf |
906 KB |
| Computer-Aided Design/2007 Volume 39/2/A-virtual-manufacturing-system-for-components-made-of-a-multiphase-perfect-material.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/2/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/2/Call-for-Papers-Multi-Modal-Modeling-in-Design.pdf |
57 KB |
| Computer-Aided Design/2007 Volume 39/2/Error-analysis-of-reparametrization-based-approaches-for-curve-offsetting.pdf |
653 KB |
| Computer-Aided Design/2007 Volume 39/2/Improved-method-of-multicriteria-fuzzy-decision-making-based-on-vague-sets.pdf |
230 KB |
| Computer-Aided Design/2007 Volume 39/2/John-Stark,-A-PLM-handbook-has-finally-arrived,-Product-lifecycle-management-21st-century-paradigm-for-product-realisation,-Springer-Verlag,-London-3rd-printing-(2006)-ISBN-1-85233-810-5,-p.-441-[euro]-69.pdf |
223 KB |
| Computer-Aided Design/2007 Volume 39/2/On-PH-quintic-spirals-joining-two-circles-with-one-circle-inside-the-other.pdf |
631 KB |
| Computer-Aided Design/2007 Volume 39/2/Recent-Special-Issues.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/2/Sliver-free-perturbation-for-the-Delaunay-tetrahedrization.pdf |
419 KB |
| Computer-Aided Design/2007 Volume 39/3/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/3/High-tilt-parallel-positioning-mechanism-development-and-cutter-path-simulation-for-laser-micro-machining.pdf |
2.5 MB |
| Computer-Aided Design/2007 Volume 39/3/Lithography-upon-micromirrors.pdf |
2.5 MB |
| Computer-Aided Design/2007 Volume 39/3/Micro-nano-technology-special-issue.pdf |
109 KB |
| Computer-Aided Design/2007 Volume 39/3/Most-cited-paper-award.pdf |
428 KB |
| Computer-Aided Design/2007 Volume 39/3/Periodic-surface-modeling-for-computer-aided-nano-design.pdf |
3.1 MB |
| Computer-Aided Design/2007 Volume 39/3/Recent-Special-Issues.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/3/Solid-based-CAPP-for-surface-micromachined-MEMS-devices.pdf |
1.9 MB |
| Computer-Aided Design/2007 Volume 39/4/A-feasible-approach-to-the-integration-of-CAD-and-CAPP.pdf |
2.4 MB |
| Computer-Aided Design/2007 Volume 39/4/A-new-automated-scheme-of-quadrilateral-mesh-generation-for-randomly-distributed-line-constraints.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/4/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/4/Detection-of-closed-sharp-edges-in-point-clouds-using-normal-estimation-and-graph-theory.pdf |
966 KB |
| Computer-Aided Design/2007 Volume 39/4/Elmar-Langetepe-and-Gabriel-Zachmann,-An-enjoyable-introduction-to-computational-geometry,-Geometric-data-structures-for-computer-graphics,-AK-Peters-Ltd.-(2006)-ISBN-1-56881-235-3,-p.-369-$-59.00.pdf |
202 KB |
| Computer-Aided Design/2007 Volume 39/4/Heterogeneous-object-modeling-A-review.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/4/Interpolation-by-geometric-algorithm.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/4/Mechanistic-modelling-of-5-axis-milling-using-an-adaptive-and-local-depth-buffer.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/4/Recent-Special-Issues.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/4/Splines-in-the-parameter-domain-of-surfaces-and-their-application-in-filament-winding.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/4/System-design-and-user-evaluation-of-Co-Star-An-immersive-stereoscopic-system-for-cable-harness-design.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/4/Systematic-geometric-rigid-body-error-identification-of-5-axis-milling-machines.pdf |
1.2 MB |
| Computer-Aided Design/2007 Volume 39/5/A-spectral-approach-to-shape-based-retrieval-of-articulated-3D-models.pdf |
1.4 MB |
| Computer-Aided Design/2007 Volume 39/5/Automatic-extraction-of-surface-structures-in-digital-shape-reconstruction.pdf |
1.9 MB |
| Computer-Aided Design/2007 Volume 39/5/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/5/Computing-a-family-of-skeletons-of-volumetric-models-for-shape-description.pdf |
1.6 MB |
| Computer-Aided Design/2007 Volume 39/5/Error-guided-adaptive-Fourier-based-surface-reconstruction.pdf |
1.4 MB |
| Computer-Aided Design/2007 Volume 39/5/G2-surface-modeling-using-minimal-mean-curvature-variation-flow.pdf |
1.3 MB |
| Computer-Aided Design/2007 Volume 39/5/Geometric-modeling-and-processing-2006.pdf |
93 KB |
| Computer-Aided Design/2007 Volume 39/5/Inverse-adaptation-of-a-Hex-dominant-mesh-for-large-deformation-finite-element-analysis.pdf |
2.4 MB |
| Computer-Aided Design/2007 Volume 39/5/Preserving-form-features-in-interactive-mesh-deformation.pdf |
892 KB |
| Computer-Aided Design/2007 Volume 39/5/Recent-Special-Issues.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/5/Subdivision-termination-criteria-in-subdivision-multivariate-solvers-using-dual-hyperplanes-representations.pdf |
918 KB |
| Computer-Aided Design/2007 Volume 39/5/Surface-and-normal-ensembles-for-surface-reconstruction.pdf |
2.6 MB |
| Computer-Aided Design/2007 Volume 39/5/Theoretically-based-algorithms-for-robustly-tracking-intersection-curves-of-deforming-surfaces.pdf |
1.3 MB |
| Computer-Aided Design/2007 Volume 39/6/An-approximation-of-circular-arcs-by-quartic-Bezier-curves.pdf |
355 KB |
| Computer-Aided Design/2007 Volume 39/6/Angle-deficit-approximation-of-Gaussian-curvature-and-its-convergence-over-quadrilateral-meshes.pdf |
1.5 MB |
| Computer-Aided Design/2007 Volume 39/6/B-spline-curve-fitting-based-on-adaptive-curve-refinement-using-dominant-points.pdf |
1.2 MB |
| Computer-Aided Design/2007 Volume 39/6/Calendar.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/6/Constant-cusp-height-tool-paths-as-geodesic-parallels-on-an-abstract-Riemannian-manifold.pdf |
1.2 MB |
| Computer-Aided Design/2007 Volume 39/6/Exact-and-approximate-construction-of-offset-polygons.pdf |
965 KB |
| Computer-Aided Design/2007 Volume 39/6/Laplace-spectra-as-fingerprints-for-image-recognition.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/6/Minimum-distance-between-two-sphere-swept-surfaces.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/6/Turbine-blade-temperature-transfer-using-the-load-surface-method.pdf |
3.1 MB |
| Computer-Aided Design/2007 Volume 39/6/Using-haptic-feedback-as-an-aid-in-the-design-of-passive-mechanisms.pdf |
979 KB |
| Computer-Aided Design/2007 Volume 39/7/A-new-digital-human-environment-and-assessment-of-vehicle-interior-design.pdf |
2.2 MB |
| Computer-Aided Design/2007 Volume 39/7/Accurate-geometrical-constraints-for-the-computer-aided-modelling-of-the-human-upper-limb.pdf |
960 KB |
| Computer-Aided Design/2007 Volume 39/7/An-approach-to-integrating-shape-and-biomedical-attributes-in-vascular-models.pdf |
1.6 MB |
| Computer-Aided Design/2007 Volume 39/7/Automatic-body-feature-extraction-from-a-marker-less-scanned-human-body.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/7/Biomechanical-study-of-lumbar-spine-with-dynamic-stabilization-device-using-finite-element-method.pdf |
2.1 MB |
| Computer-Aided Design/2007 Volume 39/7/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/7/Human-modeling-and-applications-special-issue.pdf |
96 KB |
| Computer-Aided Design/2007 Volume 39/7/Mesh-resolution-augmentation-using-3D-skin-bank.pdf |
2 MB |
| Computer-Aided Design/2007 Volume 39/7/Recent-Special-Issues.pdf |
86 KB |
| Computer-Aided Design/2007 Volume 39/7/The-effect-of-tendons-on-foot-skin-deformation.pdf |
2.4 MB |
| Computer-Aided Design/2007 Volume 39/8/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/8/Call-for-Papers-Emerging-industry-needs-for-frameworks-and-technologies-for-exchanging-and-sharing-of-product-lifecycle-knowledge.pdf |
58 KB |
| Computer-Aided Design/2007 Volume 39/8/Computing-general-geometric-structures-on-surfaces-using-Ricci-flow.pdf |
3.4 MB |
| Computer-Aided Design/2007 Volume 39/8/Controlled-topology-filtering.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/8/G1-smooth-branching-surface-construction-from-cross-sections.pdf |
2.5 MB |
| Computer-Aided Design/2007 Volume 39/8/Generalized-penetration-depth-computation.pdf |
1.3 MB |
| Computer-Aided Design/2007 Volume 39/8/Interactive-simulation-of-one-dimensional-flexible-parts.pdf |
1.4 MB |
| Computer-Aided Design/2007 Volume 39/8/Real-time-haptic-incision-simulation-using-FEM-based-discontinuous-free-form-deformation.pdf |
1.1 MB |
| Computer-Aided Design/2007 Volume 39/8/Recent-Special-Issues.pdf |
85 KB |
| Computer-Aided Design/2007 Volume 39/8/Solid-and-Physical-Modeling-2006.pdf |
104 KB |
| Computer-Aided Design/2007 Volume 39/8/Solving-topological-constraints-for-declarative-families-of-objects.pdf |
1022 KB |
| Computer-Aided Design/2007 Volume 39/9/A-divide-and-conquer-algorithm-for-medial-surface-calculation-of-planar-polyhedra.pdf |
4.7 MB |
| Computer-Aided Design/2007 Volume 39/9/Automatic-design-support-and-image-evaluation-of-two-coloured-products-using-colour-association-and-colour-harmony-scales-and-genetic-algorithm.pdf |
1.7 MB |
| Computer-Aided Design/2007 Volume 39/9/Boundary-of-the-volume-swept-by-a-free-form-solid-in-screw-motion.pdf |
1.3 MB |
| Computer-Aided Design/2007 Volume 39/9/Calendar.pdf |
90 KB |
| Computer-Aided Design/2007 Volume 39/9/Call-for-Papers-Advanced-and-emerging-virtual-and-augmented-reality-technologies-in-product-design.pdf |
56 KB |
| Computer-Aided Design/2007 Volume 39/9/Computing-non-visibility-of-convex-polygonal-facets-on-the-surface-of-a-polyhedral-CAD-model.pdf |
1.9 MB |
| Computer-Aided Design/2007 Volume 39/9/Generating-strictly-non-self-overlapping-structured-quadrilateral-grids.pdf |
1.8 MB |
| Computer-Aided Design/2007 Volume 39/9/Generating-subdivision-surfaces-from-profile-curves.pdf |
2.4 MB |
| Computer-Aided Design/2007 Volume 39/9/GeoTran-HC-Geometric-transformation-of-highly-coupled-variable-topology-multi-body-problems.pdf |
3.1 MB |
| Computer-Aided Design/2007 Volume 39/9/Modeling-dynamic-developable-meshes-by-the-Hamilton-principle.pdf |
2.6 MB |
| Computer-Aided Design/2007 Volume 39/9/Non-iterative-approach-for-global-mesh-optimization.pdf |
1.8 MB |
| Computer-Aided Design/2007 Volume 39/9/Recent-Special-Issue.pdf |
85 KB |
| Computer-Aided Design/2008 Volume 40/1/Boolean-surfaces-with-shape-constraints.pdf |
1.4 MB |
| Computer-Aided Design/2008 Volume 40/1/Calendar.pdf |
80 KB |
| Computer-Aided Design/2008 Volume 40/1/Call-for-Papers-Point-based-Computational-Techniques.pdf |
52 KB |
| Computer-Aided Design/2008 Volume 40/1/Constrained-curve-fitting-on-manifolds.pdf |
1.6 MB |
| Computer-Aided Design/2008 Volume 40/1/Constrained-design-of-polynomial-surfaces-from-geodesic-curves.pdf |
1 MB |
| Computer-Aided Design/2008 Volume 40/1/Cubic-polynomial-patches-through-geodesics.pdf |
697 KB |
| Computer-Aided Design/2008 Volume 40/1/Detecting-approximate-symmetries-of-discrete-point-subsets.pdf |
2 MB |
| Computer-Aided Design/2008 Volume 40/1/Dual-evolution-of-planar-parametric-spline-curves-and-T-spline-level-sets.pdf |
1.1 MB |
| Computer-Aided Design/2008 Volume 40/1/Geometrically-exact-dynamic-splines.pdf |
1.2 MB |
| Computer-Aided Design/2008 Volume 40/1/Integrative-3D-modelling-of-complex-carving-surface.pdf |
3.1 MB |
| Computer-Aided Design/2008 Volume 40/1/Rational-cubic-spirals.pdf |
1.2 MB |
| Computer-Aided Design/2008 Volume 40/1/Recent-Special-Issue.pdf |
77 KB |
| Computer-Aided Design/2008 Volume 40/1/Special-issue-on-constrained-design-of-curves-and-surfaces.pdf |
111 KB |
| Computer-Aided Design/2008 Volume 40/1/Structure-oriented-contour-representation-and-matching-for-engineering-shapes.pdf |
1.6 MB |
| Computer-Aided Design/2008 Volume 40/1/Towards-flattenable-mesh-surfaces.pdf |
2.3 MB |
| Computer-Aided Design/2008 Volume 40/10-11/A-control-approach-for-pore-size-distribution-in-the-bone-scaffold-based-on-the-hexahedral-mesh-refinement.pdf |
5.1 MB |
| Computer-Aided Design/2008 Volume 40/10-11/A-policy-of-conflict-negotiation-based-on-fuzzy-matter-element-particle-swarm-optimization-in-distributed-collaborative-creative-design.pdf |
1.2 MB |
| Computer-Aided Design/2008 Volume 40/10-11/Calendar.pdf |
228 KB |
| Computer-Aided Design/2008 Volume 40/10-11/Computing-the-minimum-distance-between-a-point-and-a-NURBS-curve.pdf |
1.6 MB |
| Computer-Aided Design/2008 Volume 40/10-11/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/10-11/Efficient-algorithm-to-detect-collision-between-deformable-B-spline-surfaces-for-virtual-sculpting.pdf |
5.5 MB |
| Computer-Aided Design/2008 Volume 40/10-11/J-splines.pdf |
4.7 MB |
| Computer-Aided Design/2008 Volume 40/10-11/Optimization-of-5-axis-high-speed-machining-using-a-surface-based-approach.pdf |
3.4 MB |
| Computer-Aided Design/2008 Volume 40/10-11/Recent-Special-Issues.pdf |
228 KB |
| Computer-Aided Design/2008 Volume 40/10-11/Reducing-control-points-in-lofted-B-spline-surface-interpolation-using-common-knot-vector-determination.pdf |
2.8 MB |
| Computer-Aided Design/2008 Volume 40/10-11/Reducing-X,Y-and-Z-axes-movement-of-a-5-axis-AC-type-milling-machine-by-changing-the-location-of-the-work-piece.pdf |
1.9 MB |
| Computer-Aided Design/2008 Volume 40/12/A-hexahedral-mesh-connectivity-compression-with-vertex-degrees.pdf |
3.1 MB |
| Computer-Aided Design/2008 Volume 40/12/An-interactive-co-evolutionary-CAD-system-for-garment-pattern-design.pdf |
2.7 MB |
| Computer-Aided Design/2008 Volume 40/12/Calendar.pdf |
228 KB |
| Computer-Aided Design/2008 Volume 40/12/Case-based-reasoning-method-for-computer-aided-welding-fixture-design.pdf |
7 MB |
| Computer-Aided Design/2008 Volume 40/12/Direct-digital-manufacturing-of-three-dimensional-functionally-graded-material-objects.pdf |
4.3 MB |
| Computer-Aided Design/2008 Volume 40/12/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2008 Volume 40/12/Five-axis-tool-path-generation-for-a-flat-end-tool-based-on-iso-conic-partitioning.pdf |
9.2 MB |
| Computer-Aided Design/2008 Volume 40/12/Improved-Binary-Space-Partition-merging.pdf |
2 MB |
| Computer-Aided Design/2008 Volume 40/12/Recent-Special-Issues.pdf |
228 KB |
| Computer-Aided Design/2008 Volume 40/2/A-distance-based-parameter-free-algorithm-for-curve-reconstruction.pdf |
2.3 MB |
| Computer-Aided Design/2008 Volume 40/2/A-study-of-the-influence-of-technical-attributes-of-beginner-CAD-users-on-their-performance.pdf |
604 KB |
| Computer-Aided Design/2008 Volume 40/2/Adaptation-of-CAD-model-topology-for-finite-element-analysis.pdf |
3.9 MB |
| Computer-Aided Design/2008 Volume 40/2/Approximate-computation-of-curves-on-B-spline-surfaces.pdf |
2 MB |
| Computer-Aided Design/2008 Volume 40/2/Calendar.pdf |
80 KB |
| Computer-Aided Design/2008 Volume 40/2/Call-for-Papers-Voronoi-Diagrams-and-their-Applications-in-CADCAMCAE-special-issue.pdf |
51 KB |
| Computer-Aided Design/2008 Volume 40/2/Computing-exact-rational-offsets-of-quadratic-triangular-Bezier-surface-patches.pdf |
1.7 MB |
| Computer-Aided Design/2008 Volume 40/2/Content-based-assembly-search-A-step-towards-assembly-reuse.pdf |
2.4 MB |
| Computer-Aided Design/2008 Volume 40/2/Extruder-path-generation-for-Curved-Layer-Fused-Deposition-Modeling.pdf |
2.3 MB |
| Computer-Aided Design/2008 Volume 40/2/Identification-of-C1-and-C2-discontinuities-for-surface-meshes-in-CAD.pdf |
2.4 MB |
| Computer-Aided Design/2008 Volume 40/2/On-validating-STEP-product-data-exchange.pdf |
512 KB |
| Computer-Aided Design/2008 Volume 40/2/Recent-Special-Issue.pdf |
77 KB |
| Computer-Aided Design/2008 Volume 40/2/Self-intersection-detection-and-elimination-in-freeform-curves-and-surfaces.pdf |
1 MB |
| Computer-Aided Design/2008 Volume 40/2/Spatial-and-temporal-competition-as-a-two-dimensional-kinetic-Voronoi-diagram.pdf |
1.8 MB |
| Computer-Aided Design/2008 Volume 40/3/A-global-clustering-approach-to-point-cloud-simplification-with-a-specified-data-reduction-ratio.pdf |
2.1 MB |
| Computer-Aided Design/2008 Volume 40/3/Analysis-of-validated-error-bounds-of-surface-to-surface-intersection.pdf |
828 KB |
| Computer-Aided Design/2008 Volume 40/3/CAD-based-reconstruction-of-3D-polycrystalline-alloy-microstructures-from-FIB-generated-serial-sections.pdf |
2.7 MB |
| Computer-Aided Design/2008 Volume 40/3/Calendar.pdf |
80 KB |
| Computer-Aided Design/2008 Volume 40/3/Call-for-Papers-Advanced-and-Emerging-Virtual-and-Augmented-Reality-Technologies-in-Product-Design.pdf |
51 KB |
| Computer-Aided Design/2008 Volume 40/3/Call-for-Papers-Voronoi-Diagrams-and-their-applications-in-CADCAMCAE.pdf |
51 KB |
| Computer-Aided Design/2008 Volume 40/3/Curvilinear-space-filling-curves-for-five-axis-machining.pdf |
3.6 MB |
| Computer-Aided Design/2008 Volume 40/3/End-mill-design-and-machining-via-cutting-simulation.pdf |
2 MB |
| Computer-Aided Design/2008 Volume 40/3/Optimum-design-of-reinforced-concrete-plane-frames-based-on-predetermined-section-database.pdf |
1.9 MB |
| Computer-Aided Design/2008 Volume 40/3/Plastic-injection-mould-cooling-system-design-by-the-configuration-space-method.pdf |
3.6 MB |
| Computer-Aided Design/2008 Volume 40/3/Recent-Special-Issue.pdf |
79 KB |
| Computer-Aided Design/2008 Volume 40/3/Shape-differentiation-of-freeform-surfaces-using-a-similarity-measure-based-on-an-integral-of-Gaussian-curvature.pdf |
1.9 MB |
| Computer-Aided Design/2008 Volume 40/3/Similarity-measures-for-mid-surface-quality-evaluation.pdf |
2.6 MB |
| Computer-Aided Design/2008 Volume 40/3/WireWarping-A-fast-surface-flattening-approach-with-length-preserved-feature-curves.pdf |
3.4 MB |
| Computer-Aided Design/2008 Volume 40/4/A--based-layout-design-for-gratings-allocation.pdf |
1.8 MB |
| Computer-Aided Design/2008 Volume 40/4/An-enhanced-method-and-its-application-for-fuzzy-multi-criteria-decision-making-based-on-vague-sets.pdf |
1011 KB |
| Computer-Aided Design/2008 Volume 40/4/Automatic-recognition-of-features-from-freeform-surface-CAD-models.pdf |
3.9 MB |
| Computer-Aided Design/2008 Volume 40/4/Calendar.pdf |
100 KB |
| Computer-Aided Design/2008 Volume 40/4/Computation-of-medial-axis-and-offset-curves-of-curved-boundaries-in-planar-domain.pdf |
2.8 MB |
| Computer-Aided Design/2008 Volume 40/4/Geometric-Hermite-interpolation-with-circular-precision.pdf |
340 KB |
| Computer-Aided Design/2008 Volume 40/4/Geometrical-product-specifications----model-for-product-life-cycle.pdf |
1.1 MB |
| Computer-Aided Design/2008 Volume 40/4/Hanan-Samet,-What-is-in-there,-where-is-it,-and-what-is-it-close-to-Dealing-with-spatial-and-metric-data-,-Foundations-of-multidimensional-and-metric-data-structures,-Morgan-Kaufmann-(2006)-ISBN-978-0-12-.pdf |
236 KB |
| Computer-Aided Design/2008 Volume 40/4/Most-cited-paper-award.pdf |
408 KB |
| Computer-Aided Design/2008 Volume 40/4/Product-interface-reengineering-using-fuzzy-clustering.pdf |
662 KB |
| Computer-Aided Design/2008 Volume 40/4/Recent-Special-Issue.pdf |
96 KB |
| Computer-Aided Design/2008 Volume 40/4/Surface-reconstruction-via-geodesic-interpolation.pdf |
2.8 MB |
| Computer-Aided Design/2008 Volume 40/4/Symbolic-OBDD-representations-for-mechanical-assembly-sequences.pdf |
1.1 MB |
| Computer-Aided Design/2008 Volume 40/4/Visibility-based-spatial-reasoning-for-object-manipulation-in-cluttered-environments.pdf |
4.4 MB |
| Computer-Aided Design/2008 Volume 40/5/,3D-imaging-A-diversity-of-applications-.John-Fryer,-Harvey-Mitchell-and-Jim-Chandler,-Editors,-Applications-of-3D-measurement-from-images,-Whittles-Publishing-(2007)-ISBN-978-1870325-69-1,-p.-304-[pound-.pdf |
213 KB |
| Computer-Aided Design/2008 Volume 40/5/A-heuristic-for-nesting-problems-of-irregular-shapes.pdf |
1.5 MB |
| Computer-Aided Design/2008 Volume 40/5/A-numerically-stable-fragile-watermarking-scheme-for-authenticating-3D-models.pdf |
1.5 MB |
| Computer-Aided Design/2008 Volume 40/5/After-the-revolution-Geometric-algebra-for-Computer-Scientists-in-the-twenty-first-century.pdf |
187 KB |
| Computer-Aided Design/2008 Volume 40/5/An-extension-on-robust-directed-projection-of-points-onto-point-clouds.pdf |
3.8 MB |
| Computer-Aided Design/2008 Volume 40/5/Analytical-and-practical-investigation-of-surface-machining.pdf |
224 KB |
| Computer-Aided Design/2008 Volume 40/5/Analytical-estimation-of-error-in-flank-milling-of-ruled-surfaces.pdf |
960 KB |
| Computer-Aided Design/2008 Volume 40/5/Automatic-segmentation-of-unorganized-noisy-point-clouds-based-on-the-Gaussian-map.pdf |
4 MB |
| Computer-Aided Design/2008 Volume 40/5/Calendar.pdf |
99 KB |
| Computer-Aided Design/2008 Volume 40/5/Development-of-an-integrated-look-ahead-dynamics-based-NURBS-interpolator-for-high-precision-machinery.pdf |
2.6 MB |
| Computer-Aided Design/2008 Volume 40/5/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/5/From-laser-point-clouds-to-surfaces-Statistical-nonparametric-methods-for-three-dimensional-reconstruction.pdf |
1.2 MB |
| Computer-Aided Design/2008 Volume 40/5/Functional-splines-with-different-degrees-of-smoothness-and-their-applications.pdf |
902 KB |
| Computer-Aided Design/2008 Volume 40/5/ISO-14649-based-nonlinear-process-planning-implementation-for-complex-machining.pdf |
2.5 MB |
| Computer-Aided Design/2008 Volume 40/5/Recent-Special-Issue.pdf |
96 KB |
| Computer-Aided Design/2008 Volume 40/5/Second-order-approximation-of-tool-envelope-surface-for-5-axis-machining-with-single-point-contact.pdf |
2.4 MB |
| Computer-Aided Design/2008 Volume 40/5/The-application-of-surface-demoldability-and-moldability-to-side-core-design-in-die-and-mold-CAD.pdf |
1.5 MB |
| Computer-Aided Design/2008 Volume 40/6/Adaptive-feature-preserving-non-local-denoising-of-static-and-time-varying-range-data.pdf |
1.9 MB |
| Computer-Aided Design/2008 Volume 40/6/Calendar.pdf |
99 KB |
| Computer-Aided Design/2008 Volume 40/6/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/6/Exact-and-efficient-evaluation-of-the-InCircle-predicate-for-parametric-ellipses-and-smooth-convex-objects.pdf |
1.1 MB |
| Computer-Aided Design/2008 Volume 40/6/Manifold-splines-with-a-single-extraordinary-point.pdf |
5.1 MB |
| Computer-Aided Design/2008 Volume 40/6/Polycube-splines.pdf |
4.1 MB |
| Computer-Aided Design/2008 Volume 40/6/Recent-Special-Issue.pdf |
96 KB |
| Computer-Aided Design/2008 Volume 40/6/Shape-modeling-and-matching-in-identifying-3D-protein-structures.pdf |
1.7 MB |
| Computer-Aided Design/2008 Volume 40/6/Simultaneous-optimization-of-the-material-properties-and-the-topology-of-functionally-graded-structures.pdf |
3.1 MB |
| Computer-Aided Design/2008 Volume 40/6/Solid-and-physical-modeling.pdf |
139 KB |
| Computer-Aided Design/2008 Volume 40/7/An-assessment-of-the-current-state-of-product-data-technologies.pdf |
3.9 MB |
| Computer-Aided Design/2008 Volume 40/7/Calendar.pdf |
193 KB |
| Computer-Aided Design/2008 Volume 40/7/CALL-FOR-PAPERS.pdf |
64 KB |
| Computer-Aided Design/2008 Volume 40/7/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/7/Editorial.pdf |
377 KB |
| Computer-Aided Design/2008 Volume 40/7/Information-sharing-and-exchange-in-the-context-of-product-lifecycle-management-Role-of-standards.pdf |
2.4 MB |
| Computer-Aided Design/2008 Volume 40/7/Introduction-of-a-data-schema-to-support-a-design-repository.pdf |
1.5 MB |
| Computer-Aided Design/2008 Volume 40/7/Recent-Special-Issue.pdf |
185 KB |
| Computer-Aided Design/2008 Volume 40/7/Reverse-innovative-design----an-integrated-product-design-methodology.pdf |
6.1 MB |
| Computer-Aided Design/2008 Volume 40/7/Shared-computer-aided-structural-design-model-for-construction-industry-(infrastructure).pdf |
4.2 MB |
| Computer-Aided Design/2008 Volume 40/7/Standardized-data-exchange-of-CAD-models-with-design-intent.pdf |
1.7 MB |
| Computer-Aided Design/2008 Volume 40/7/Standardizing-the-specification,-verification,-and-exchange-of-product-geometry-Research,-status-and-trends.pdf |
3.1 MB |
| Computer-Aided Design/2008 Volume 40/7/Tracking-product-specification-dependencies-in-collaborative-design-for-conflict-management.pdf |
2.8 MB |
| Computer-Aided Design/2008 Volume 40/8/Calendar.pdf |
193 KB |
| Computer-Aided Design/2008 Volume 40/8/Development-of-a-product-configuration-system-with-an-ontology-based-approach.pdf |
4.3 MB |
| Computer-Aided Design/2008 Volume 40/8/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/8/Geometric-parameter-optimization-in-multi-axis-machining.pdf |
3.1 MB |
| Computer-Aided Design/2008 Volume 40/8/Numeric-and-curve-parameters-for-freeform-surface-feature-models.pdf |
4.9 MB |
| Computer-Aided Design/2008 Volume 40/8/Recent-Special-Issue.pdf |
187 KB |
| Computer-Aided Design/2008 Volume 40/8/Trash-removal-algorithm-for-fast-construction-of-the-elliptic-Gabriel-graph-using-Delaunay-triangulation.pdf |
5.5 MB |
| Computer-Aided Design/2008 Volume 40/9/A-CAD-system-for-multi-style-thermal-functional-design-of-clothing.pdf |
10.9 MB |
| Computer-Aided Design/2008 Volume 40/9/A-template-based-reconstruction-of-plane-symmetric-3D-models-from-freehand-sketches.pdf |
7 MB |
| Computer-Aided Design/2008 Volume 40/9/Calendar.pdf |
212 KB |
| Computer-Aided Design/2008 Volume 40/9/Classifying-points-for-sweeping-solids.pdf |
6.9 MB |
| Computer-Aided Design/2008 Volume 40/9/Developable-polynomial-surface-approximation-to-smooth-surfaces-for-fabrication-parameters-of-a-large-curved-shell-plate-by-Differential-Evolution.pdf |
6.1 MB |
| Computer-Aided Design/2008 Volume 40/9/Development-of-a-distributed-collaborative-design-framework-within-peer-to-peer-environment.pdf |
8.9 MB |
| Computer-Aided Design/2008 Volume 40/9/Editorial-Board.pdf |
39 KB |
| Computer-Aided Design/2008 Volume 40/9/One-sided-offset-approximation-of-freeform-curves-for-interference-free-NURBS-machining.pdf |
2.5 MB |
| Computer-Aided Design/2008 Volume 40/9/Product-information-visualization-and-augmentation-in-collaborative-design.pdf |
5 MB |
| Computer-Aided Design/2008 Volume 40/9/Recent-Special-Issues.pdf |
203 KB |
| Computer-Aided Design/2008 Volume 40/9/Shape-feature-control-in-structural-topology-optimization.pdf |
10.6 MB |
| Computer-Aided Design/2008 Volume 40/9/The-Domain-of-Admissible-Orientation-concept-A-new-method-for-five-axis-tool-path-optimisation.pdf |
9.4 MB |
| Computer-Aided Design/2009 Volume 41/1/A-diffusion-wavelet-approach-for-3-D-model-matching.pdf |
3.5 MB |
| Computer-Aided Design/2009 Volume 41/1/Approximation-of-surface-to-surface-intersection-curves-within-a-prescribed-error-bound-satisfying-G2-continuity.pdf |
4.6 MB |
| Computer-Aided Design/2009 Volume 41/1/Consistency-constraints-and-3D-building-reconstruction.pdf |
8.1 MB |
| Computer-Aided Design/2009 Volume 41/1/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/1/Feature-detection-of-triangular-meshes-based-on-tensor-voting-theory.pdf |
6.4 MB |
| Computer-Aided Design/2009 Volume 41/1/Toolpath-planning-algorithm-for-the-ablation-process-using-energy-sources.pdf |
4.3 MB |
| Computer-Aided Design/2009 Volume 41/1/Worst-case-and-statistical-tolerance-analysis-based-on-quantified-constraint-satisfaction-problems-and-Monte-Carlo-simulation.pdf |
4.3 MB |
| Computer-Aided Design/2009 Volume 41/10/3D-terrestrial-LIDAR-classifications-with-super-voxels-and-multi-scale-Conditional-Random-Fields.pdf |
5.7 MB |
| Computer-Aided Design/2009 Volume 41/10/Calendar.pdf |
216 KB |
| Computer-Aided Design/2009 Volume 41/10/Call-for-Papers-Special-issue-proposal-for-the-journal-of-`Computer-Aided-Design'-on-`applications-in-ship-and-floating-structure-design-and-analysis'.pdf |
322 KB |
| Computer-Aided Design/2009 Volume 41/10/Characterization-of-3D-shape-parts-for-semantic-annotation.pdf |
3.1 MB |
| Computer-Aided Design/2009 Volume 41/10/Computing-handle-and-tunnel-loops-with-knot-linking.pdf |
4.7 MB |
| Computer-Aided Design/2009 Volume 41/10/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/10/Editorial.pdf |
321 KB |
| Computer-Aided Design/2009 Volume 41/10/Generating-parametric-models-of-tubes-from-laser-scans.pdf |
6.5 MB |
| Computer-Aided Design/2009 Volume 41/10/Laplace-Beltrami-eigenvalues-and-topological-features-of-eigenfunctions-for-statistical-shape-analysis.pdf |
10.8 MB |
| Computer-Aided Design/2009 Volume 41/10/Recent-Special-Issues.pdf |
233 KB |
| Computer-Aided Design/2009 Volume 41/10/Single-rate-near-lossless-compression-of-animated-geometry.pdf |
4.3 MB |
| Computer-Aided Design/2009 Volume 41/11/A-spatial-warping-method-for-freeform-modeling-based-on-a-level-set-method.pdf |
5.5 MB |
| Computer-Aided Design/2009 Volume 41/11/A-vertex-first-parametric-algorithm-for-polyhedron-blending.pdf |
5.5 MB |
| Computer-Aided Design/2009 Volume 41/11/Analytical-calculation-of-the-envelope-surface-for-generic-milling-tools-directly-from-CL-data-based-on-the-moving-frame-method.pdf |
3.1 MB |
| Computer-Aided Design/2009 Volume 41/11/Calendar.pdf |
216 KB |
| Computer-Aided Design/2009 Volume 41/11/Construction-of-Bezier-surface-patches-with-Bezier-curves-as-geodesic-boundaries.pdf |
4.1 MB |
| Computer-Aided Design/2009 Volume 41/11/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/11/Feature-based-crystal-construction-in-computer-aided-nano-design.pdf |
4.8 MB |
| Computer-Aided Design/2009 Volume 41/11/Introductory-graphics,-revisited.pdf |
438 KB |
| Computer-Aided Design/2009 Volume 41/11/Local-control-of-interpolating-rational-cubic-spline-curves.pdf |
851 KB |
| Computer-Aided Design/2009 Volume 41/11/Loop-subdivision-surfaces-interpolating-B-spline-curves.pdf |
3.4 MB |
| Computer-Aided Design/2009 Volume 41/11/Offsetting-operations-on-non-manifold-topological-models.pdf |
9.1 MB |
| Computer-Aided Design/2009 Volume 41/11/On-global-continuity-of-Coons-mappings-in-patching-CAD-surfaces.pdf |
7.8 MB |
| Computer-Aided Design/2009 Volume 41/11/Recent-Special-Issues.pdf |
233 KB |
| Computer-Aided Design/2009 Volume 41/12/A-new-global-accessibility-algorithm-for-a-polyhedral-model-with-convex-polygonal-facets.pdf |
4.9 MB |
| Computer-Aided Design/2009 Volume 41/12/A-new-method-for-machining-feature-extracting-of-objects-using-2D-technical-drawings.pdf |
8.1 MB |
| Computer-Aided Design/2009 Volume 41/12/A-robust-and-efficient-Lagrangian-constraint-toolkit-for-the-simulation-of-1D-structures.pdf |
2.4 MB |
| Computer-Aided Design/2009 Volume 41/12/An-enhanced-convex-hull-edge-method-for-flatness-tolerance-evaluation.pdf |
2.5 MB |
| Computer-Aided Design/2009 Volume 41/12/Application-of-localization-for-the-fabrication-of-large-curved-plates-in-shipbuilding.pdf |
5.3 MB |
| Computer-Aided Design/2009 Volume 41/12/Assisting-designer-using-feature-modeling-for-lifecycle.pdf |
7.9 MB |
| Computer-Aided Design/2009 Volume 41/12/Automated-design-process-modelling-and-analysis-using-immersive-virtual-reality.pdf |
8.2 MB |
| Computer-Aided Design/2009 Volume 41/12/Automated-freehand-sketch-segmentation-using-radial-basis-functions.pdf |
2.1 MB |
| Computer-Aided Design/2009 Volume 41/12/Calendar.pdf |
216 KB |
| Computer-Aided Design/2009 Volume 41/12/Distance-functions-and-skeletal-representations-of-rigid-and-non-rigid-planar-shapes.pdf |
4.9 MB |
| Computer-Aided Design/2009 Volume 41/12/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/12/Extended-linked-voxel-structure-for-point-to-mesh-distance-computation-and-its-application-to-NC-collision-detection.pdf |
2.4 MB |
| Computer-Aided Design/2009 Volume 41/12/Extracting-common-design-patterns-from-a-set-of-solid-models.pdf |
8.8 MB |
| Computer-Aided Design/2009 Volume 41/12/List-of-Reviewers.pdf |
379 KB |
| Computer-Aided Design/2009 Volume 41/12/Medial-axis-of-a-planar-region-by-offset-self-intersections.pdf |
4.2 MB |
| Computer-Aided Design/2009 Volume 41/12/New-approach-to-5-axis-flank-milling-of-free-form-surfaces-Computation-of-adapted-tool-shape.pdf |
4.3 MB |
| Computer-Aided Design/2009 Volume 41/12/Optimize-tool-paths-of-flank-milling-with-generic-cutters-based-on-approximation-using-the-tool-envelope-surface.pdf |
6.2 MB |
| Computer-Aided Design/2009 Volume 41/12/Optimized-GPU-evaluation-of-arbitrary-degree-NURBS-curves-and-surfaces.pdf |
6 MB |
| Computer-Aided Design/2009 Volume 41/12/Recent-Special-Issues.pdf |
233 KB |
| Computer-Aided Design/2009 Volume 41/12/Shape-based-clustering-for-3D-CAD-objects-A-comparative-study-of-effectiveness.pdf |
3.9 MB |
| Computer-Aided Design/2009 Volume 41/12/Sketch-based-retrieval-of-complex-drawings-using-hierarchical-topology-and-geometry.pdf |
5.5 MB |
| Computer-Aided Design/2009 Volume 41/12/Stable-six-degrees-of-freedom-haptic-feedback-for-flexible-ligand-protein-docking.pdf |
4.5 MB |
| Computer-Aided Design/2009 Volume 41/12/Surface-self-intersection-computation-via-algebraic-decomposition.pdf |
1.9 MB |
| Computer-Aided Design/2009 Volume 41/12/Tool-path-programming-optimization-for-incremental-sheet-forming-applications.pdf |
3 MB |
| Computer-Aided Design/2009 Volume 41/12/User-assisted-simplification-method-for-triangle-meshes-preserving-boundaries.pdf |
11.3 MB |
| Computer-Aided Design/2009 Volume 41/12/Virtual-prototyping-of-automated-manufacturing-systems-with-Geometry-driven-Petri-nets.pdf |
2.2 MB |
| Computer-Aided Design/2009 Volume 41/2/A-survey-of-CAD-model-simplification-techniques-for-physics-based-simulation-applications.pdf |
3.1 MB |
| Computer-Aided Design/2009 Volume 41/2/Announcement.pdf |
74 KB |
| Computer-Aided Design/2009 Volume 41/2/Calendar.pdf |
238 KB |
| Computer-Aided Design/2009 Volume 41/2/Direct-boolean-intersection-between-acquired-and-designed-geometry.pdf |
8 MB |
| Computer-Aided Design/2009 Volume 41/2/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/2/Generating-cutter-swept-envelopes-in-five-axis-milling-by-two-parameter-families-of-spheres.pdf |
4.7 MB |
| Computer-Aided Design/2009 Volume 41/2/Three-dimensional-modeling-and-finite-element-simulation-of-a-generic-end-mill.pdf |
4.4 MB |
| Computer-Aided Design/2009 Volume 41/3/A-computerized-optimization-framework-for-the-morphological-matrix-applied-to-aircraft-conceptual-design.pdf |
3.5 MB |
| Computer-Aided Design/2009 Volume 41/3/ArchiDNA-An-interactive-system-for-creating-2D-and-3D-conceptual-drawings-in-architectural-design.pdf |
8.7 MB |
| Computer-Aided Design/2009 Volume 41/3/Calendar.pdf |
238 KB |
| Computer-Aided Design/2009 Volume 41/3/CALL-FOR-PAPERS.pdf |
314 KB |
| Computer-Aided Design/2009 Volume 41/3/Capturing-design-rationale.pdf |
8.7 MB |
| Computer-Aided Design/2009 Volume 41/3/Creative-conceptual-design-Extending-the-scope-by-infused-design.pdf |
5.5 MB |
| Computer-Aided Design/2009 Volume 41/3/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/3/Editorial.pdf |
332 KB |
| Computer-Aided Design/2009 Volume 41/3/Impact-of-CAD-tools-on-creative-problem-solving-in-engineering-design.pdf |
4.1 MB |
| Computer-Aided Design/2009 Volume 41/3/Modeling-design-objects-in-CAD-system-for-ServiceProduct-Engineering.pdf |
9 MB |
| Computer-Aided Design/2009 Volume 41/3/Multi-attribute-utility-analysis-in-set-based-conceptual-design.pdf |
2.4 MB |
| Computer-Aided Design/2009 Volume 41/3/Physical-sketching-Reconstruction-and-analysis-of-3D-objects-from-freehand-sketches.pdf |
5.4 MB |
| Computer-Aided Design/2009 Volume 41/3/Recent-Special-Issues.pdf |
228 KB |
| Computer-Aided Design/2009 Volume 41/4/Calendar.pdf |
238 KB |
| Computer-Aided Design/2009 Volume 41/4/Duplex-fitting-of-zero-level-and-offset-surfaces.pdf |
10.6 MB |
| Computer-Aided Design/2009 Volume 41/4/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/4/Editorial.pdf |
317 KB |
| Computer-Aided Design/2009 Volume 41/4/Extracting-lines-of-curvature-from-noisy-point-clouds.pdf |
6.5 MB |
| Computer-Aided Design/2009 Volume 41/4/Multi-sensor-calibration-through-iterative-registration-and-fusion.pdf |
8.3 MB |
| Computer-Aided Design/2009 Volume 41/4/Particle-based-viscoplastic-fluidsolid-simulation.pdf |
4.6 MB |
| Computer-Aided Design/2009 Volume 41/4/Recent-Special-Issues.pdf |
229 KB |
| Computer-Aided Design/2009 Volume 41/4/Robust-principal-axes-determination-for-point-based-shapes-using-least-median-of-squares.pdf |
7 MB |
| Computer-Aided Design/2009 Volume 41/4/Simultaneous-registration-of-multiple-views-with-markers.pdf |
6.4 MB |
| Computer-Aided Design/2009 Volume 41/4/Spectral-moving-removal-of-non-isolated-surface-outlier-clusters.pdf |
7.3 MB |
| Computer-Aided Design/2009 Volume 41/4/Tracked-motion-based-dental-occlusion-surface-estimation-for-crown-restoration.pdf |
7.3 MB |
| Computer-Aided Design/2009 Volume 41/5/CAD-data-visualization-on-mobile-devices-using-sequential-constrained-Delaunay-triangulation.pdf |
7.9 MB |
| Computer-Aided Design/2009 Volume 41/5/Calendar.pdf |
238 KB |
| Computer-Aided Design/2009 Volume 41/5/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/5/Guaranteed-quality-anisotropic-mesh-generation-for-domains-with-curved-boundaries.pdf |
3.6 MB |
| Computer-Aided Design/2009 Volume 41/5/Medial-axis-computation-for-planar-free-form-shapes.pdf |
4.8 MB |
| Computer-Aided Design/2009 Volume 41/5/Natural-neighbor-extrapolation-using-ghost-points.pdf |
8.5 MB |
| Computer-Aided Design/2009 Volume 41/5/New-trends-in-Voronoi-diagrams-for-CADCAMCAE.pdf |
320 KB |
| Computer-Aided Design/2009 Volume 41/5/Optimization-based-approach-for-curve-and-surface-reconstruction.pdf |
2.7 MB |
| Computer-Aided Design/2009 Volume 41/5/Recent-Special-Issues.pdf |
230 KB |
| Computer-Aided Design/2009 Volume 41/5/Topology-oriented-incremental-computation-of-Voronoi-diagrams-of-circular-arcs-and-straight-line-segments.pdf |
2.9 MB |
| Computer-Aided Design/2009 Volume 41/6/Automated-scanning-of-dental-impressions.pdf |
4.2 MB |
| Computer-Aided Design/2009 Volume 41/6/Blending-two-parametric-curves.pdf |
1.9 MB |
| Computer-Aided Design/2009 Volume 41/6/Calendar.pdf |
238 KB |
| Computer-Aided Design/2009 Volume 41/6/Curvature-aware-adaptive-re-sampling-for-point-sampled-geometry.pdf |
11.6 MB |
| Computer-Aided Design/2009 Volume 41/6/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/6/High-order-approximation-of-implicit-surfaces-by-G1-triangular-spline-surfaces.pdf |
7.2 MB |
| Computer-Aided Design/2009 Volume 41/6/Point-tangentpoint-normal-B-spline-curve-interpolation-by-geometric-algorithms.pdf |
4 MB |
| Computer-Aided Design/2009 Volume 41/6/Quart-parametric-interpolations-for-intersecting-paths.pdf |
3.3 MB |
| Computer-Aided Design/2009 Volume 41/6/Recent-Special-Issues.pdf |
231 KB |
| Computer-Aided Design/2009 Volume 41/6/Relative-blending.pdf |
2.5 MB |
| Computer-Aided Design/2009 Volume 41/6/Triangulation-of-molecular-surfaces.pdf |
9.4 MB |
| Computer-Aided Design/2009 Volume 41/7/A-smooth-spiral-tool-path-for-high-speed-machining-of-2D-pockets.pdf |
2.4 MB |
| Computer-Aided Design/2009 Volume 41/7/An-integrated-genetic-algorithm-complemented-with-direct-search-for-optimum-design-of-RC-frames.pdf |
2.5 MB |
| Computer-Aided Design/2009 Volume 41/7/Calendar.pdf |
224 KB |
| Computer-Aided Design/2009 Volume 41/7/Contributing-vertices-based-Minkowski-sum-computation-of-convex-polyhedra.pdf |
11 MB |
| Computer-Aided Design/2009 Volume 41/7/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/7/Finding-the-best-conic-approximation-to-the-convolution-curve-of-two-compatible-conics-based-on-Hausdorff-distance.pdf |
3.2 MB |
| Computer-Aided Design/2009 Volume 41/7/Geometric-computation-based-assembly-sequencing-and-evaluating-in-terms-of-assembly-angle,-direction,-reorientation,-and-stability.pdf |
3.5 MB |
| Computer-Aided Design/2009 Volume 41/7/Recent-Special-Issues.pdf |
218 KB |
| Computer-Aided Design/2009 Volume 41/7/The-long-awaited-arrival-of-architectural-geometry.pdf |
541 KB |
| Computer-Aided Design/2009 Volume 41/7/Tool-selection-embedded-optimal-assembly-planning-in-a-dynamic-manufacturing-environment.pdf |
7 MB |
| Computer-Aided Design/2009 Volume 41/8/Animated-solid-model-of-the-lung-constructed-from-unsynchronized-MR-sequential-images.pdf |
5.8 MB |
| Computer-Aided Design/2009 Volume 41/8/Calendar.pdf |
224 KB |
| Computer-Aided Design/2009 Volume 41/8/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/8/Hexahedral-mesh-development-of-free-formed-geometry-The-human-femur-exemplified.pdf |
2.3 MB |
| Computer-Aided Design/2009 Volume 41/8/Material-solid-modeling-of-human-body-A-heterogeneous-B-spline-based-approach.pdf |
10.6 MB |
| Computer-Aided Design/2009 Volume 41/8/Medical-modeling-special-issue-An-introduction.pdf |
324 KB |
| Computer-Aided Design/2009 Volume 41/8/Recent-Special-Issues.pdf |
233 KB |
| Computer-Aided Design/2009 Volume 41/8/Three-dimensional-shape-reconstruction-of-abdominal-aortic-aneurysm.pdf |
6.5 MB |
| Computer-Aided Design/2009 Volume 41/9/A-note-on-least-norm-solution-of-global-WireWarping.pdf |
2.5 MB |
| Computer-Aided Design/2009 Volume 41/9/Adaptive-volume-constraint-algorithm-for-stress-limit-based-topology-optimization.pdf |
3.8 MB |
| Computer-Aided Design/2009 Volume 41/9/Automation-in-the-design-of-EDM-electrodes.pdf |
9.9 MB |
| Computer-Aided Design/2009 Volume 41/9/Calendar.pdf |
224 KB |
| Computer-Aided Design/2009 Volume 41/9/Computing-global-visibility-maps-for-regions-on-the-boundaries-of-polyhedra-using-Minkowski-sums.pdf |
6.1 MB |
| Computer-Aided Design/2009 Volume 41/9/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2009 Volume 41/9/EvoArch-An-evolutionary-algorithm-for-architectural-layout-design.pdf |
11.7 MB |
| Computer-Aided Design/2009 Volume 41/9/Interactive-3D-garment-design-with-constrained-contour-curves-and-style-curves.pdf |
7.9 MB |
| Computer-Aided Design/2009 Volume 41/9/Most-cited-paper-award.pdf |
493 KB |
| Computer-Aided Design/2009 Volume 41/9/On-surface-reconstruction-A-priority-driven-approach.pdf |
6.8 MB |
| Computer-Aided Design/2009 Volume 41/9/Protection-of-intellectual-property-based-on-a-skeleton-model-in-product-design-collaboration.pdf |
4.3 MB |
| Computer-Aided Design/2009 Volume 41/9/Recent-Special-Issues.pdf |
233 KB |
| Computer-Aided Design/2009 Volume 41/9/Sufficient-conditions-for-draft-angles-on-general-B-spline-surfaces.pdf |
1.5 MB |
| Computer-Aided Design/2010 Volume 42/1/3D-ball-skinning-using-PDEs-for-generation-of-smooth-tubular-surfaces.pdf |
5.6 MB |
| Computer-Aided Design/2010 Volume 42/1/A-non-rigid-cluster-rewriting-approach-to-solve-systems-of-3D-geometric-constraints.pdf |
3.4 MB |
| Computer-Aided Design/2010 Volume 42/1/Adaptive-triangular-mesh-reconstruction-by-mean-curvature-based-refinement-from-point-clouds-using-a-moving-parabolic-approximation.pdf |
17.8 MB |
| Computer-Aided Design/2010 Volume 42/1/Calendar.pdf |
216 KB |
| Computer-Aided Design/2010 Volume 42/1/Call-for-Papers.pdf |
253 KB |
| Computer-Aided Design/2010 Volume 42/1/Carving-for-topology-simplification-of-polygonal-meshes.pdf |
3.8 MB |
| Computer-Aided Design/2010 Volume 42/1/Determining-the-directional-contact-range-of-two-convex-polyhedra.pdf |
2.6 MB |
| Computer-Aided Design/2010 Volume 42/1/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/1/Efficient-collision-detection-using-a-dual-OBB-sphere-bounding-volume-hierarchy.pdf |
2.5 MB |
| Computer-Aided Design/2010 Volume 42/1/Lepp-terminal-centroid-method-for-quality-triangulation.pdf |
3.5 MB |
| Computer-Aided Design/2010 Volume 42/1/Preface----Geometric-modeling-and-processing.pdf |
289 KB |
| Computer-Aided Design/2010 Volume 42/1/Recent-Special-Issues.pdf |
234 KB |
| Computer-Aided Design/2010 Volume 42/10/A-fast-interactive-reverse-engineering-system.pdf |
2.2 MB |
| Computer-Aided Design/2010 Volume 42/10/A-simple-and-effective-geometric-representation-for-irregular-porous-structure-modeling.pdf |
4.1 MB |
| Computer-Aided Design/2010 Volume 42/10/Applying-the-improved-Chen-and-Han's-algorithm-to-different-versions-of-shortest-path-problems-on-a-polyhedral-surface.pdf |
2.5 MB |
| Computer-Aided Design/2010 Volume 42/10/Call-for-Papers-Computer-Aided-Multi-scale-Materials-and-Product-Design.pdf |
155 KB |
| Computer-Aided Design/2010 Volume 42/10/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/10/Global-optimization-of-tool-path-for-five-axis-flank-milling-with-a-conical-cutter.pdf |
1.5 MB |
| Computer-Aided Design/2010 Volume 42/10/Merging-multiple-B-spline-surface-patches-in-a-virtual-reality-environment.pdf |
3.8 MB |
| Computer-Aided Design/2010 Volume 42/10/Quasi-worlds-and-quasi-operators-on-quasi-triangulations.pdf |
1010 KB |
| Computer-Aided Design/2010 Volume 42/10/Recent-Special-Issues.pdf |
129 KB |
| Computer-Aided Design/2010 Volume 42/10/Structural-optimization-based-on-CAD-CAE-integration-and-metamodeling-techniques.pdf |
2.1 MB |
| Computer-Aided Design/2010 Volume 42/10/Three-dimensional-beta-shapes-and-beta-complexes-via-quasi-triangulation.pdf |
1.7 MB |
| Computer-Aided Design/2010 Volume 42/11/An-integrated-method-for-predicting-the-hydrodynamic-resistance-of-low-cB-ships.pdf |
2.3 MB |
| Computer-Aided Design/2010 Volume 42/11/Application-of-a-new-multi-agent-Hybrid-Co-evolution-based-Particle-Swarm-Optimisation-methodology-in-ship-design.pdf |
2.6 MB |
| Computer-Aided Design/2010 Volume 42/11/Call-for-Papers-Computer-Aided-Multi-scale-Materials-and-Product-Design.pdf |
155 KB |
| Computer-Aided Design/2010 Volume 42/11/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/11/Five-decades-of-Computer-Aided-Ship-Design.pdf |
1.2 MB |
| Computer-Aided Design/2010 Volume 42/11/Holistic-ship-design-optimization.pdf |
3.1 MB |
| Computer-Aided Design/2010 Volume 42/11/Hull-form-optimization-in-calm-and-rough-water.pdf |
719 KB |
| Computer-Aided Design/2010 Volume 42/11/Journal-of-Computer-Aided-Design-(JCAD)-Special-Issue-on-Computer-aided-ship-design-Some-recent-results-and-steps-ahead-in-theory,-methodology-and-practice-Dedicated-to-Professor-Horst-Nowacki-on-the-occ.pdf |
310 KB |
| Computer-Aided Design/2010 Volume 42/11/Mesh-based-morphing-method-for-rapid-hull-form-generation.pdf |
1.1 MB |
| Computer-Aided Design/2010 Volume 42/11/Recent-Special-Issues.pdf |
129 KB |
| Computer-Aided Design/2010 Volume 42/11/Springback-adjustment-for-multi-point-forming-of-thick-plates-in-shipbuilding.pdf |
3.4 MB |
| Computer-Aided Design/2010 Volume 42/11/VELOS-A-VR-platform-for-ship-evacuation-analysis.pdf |
4 MB |
| Computer-Aided Design/2010 Volume 42/2/A-constraint-based-dynamic-geometry-system.pdf |
3.5 MB |
| Computer-Aided Design/2010 Volume 42/2/Calendar.pdf |
228 KB |
| Computer-Aided Design/2010 Volume 42/2/Computer-aided-design-of-ventilation-tubes-for-customized-hearing-aid-devices.pdf |
5.3 MB |
| Computer-Aided Design/2010 Volume 42/2/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/2/Feature-aligned-quad-dominant-remeshing-using-iterative-local-updates.pdf |
7.5 MB |
| Computer-Aided Design/2010 Volume 42/2/Identification-of-sections-from-engineering-drawings-based-on-evidence-theory.pdf |
5.5 MB |
| Computer-Aided Design/2010 Volume 42/2/Parallel-extraction-and-simplification-of-large-isosurfaces-using-an-extended-tandem-algorithm.pdf |
3.9 MB |
| Computer-Aided Design/2010 Volume 42/2/Pattern-computation-for-compression-garment-by-a-physicalgeometric-approach.pdf |
4.6 MB |
| Computer-Aided Design/2010 Volume 42/2/Physically-based-modeling-and-simulation-with-dynamic-spherical-volumetric-simplex-splines.pdf |
6.4 MB |
| Computer-Aided Design/2010 Volume 42/2/Preface.pdf |
291 KB |
| Computer-Aided Design/2010 Volume 42/2/Recent-Special-Issues.pdf |
234 KB |
| Computer-Aided Design/2010 Volume 42/2/Segmentation-of-multi-material-CT-data-of-mechanical-parts-for-extracting-boundary-surfaces.pdf |
6.7 MB |
| Computer-Aided Design/2010 Volume 42/3/A-geometric-approach-to-automated-fixture-layout-design.pdf |
4.8 MB |
| Computer-Aided Design/2010 Volume 42/3/An-artificial-intelligence-planning-approach-to-manufacturing-feature-recognition.pdf |
9.1 MB |
| Computer-Aided Design/2010 Volume 42/3/Be-ye-transformed-by-the-renewing-of-your-mind.pdf |
300 KB |
| Computer-Aided Design/2010 Volume 42/3/Calendar.pdf |
228 KB |
| Computer-Aided Design/2010 Volume 42/3/Constraint-based-simulation-of-carton-folding-operations.pdf |
1.4 MB |
| Computer-Aided Design/2010 Volume 42/3/Design-of-a-teaching-pendant-program-for-a-mobile-shipbuilding-welding-robot-using-a-PDA.pdf |
14 MB |
| Computer-Aided Design/2010 Volume 42/3/Detecting-design-intent-in-approximate-CAD-models-using-symmetry.pdf |
4.1 MB |
| Computer-Aided Design/2010 Volume 42/3/Digital-watermarking-of-polygonal-meshes-with-linear-operators-of-scale-functions.pdf |
3.1 MB |
| Computer-Aided Design/2010 Volume 42/3/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/3/Machine-models-and-tool-motions-for-simulating-five-axis-machining.pdf |
1.8 MB |
| Computer-Aided Design/2010 Volume 42/3/Manufacture-of-a-spur-tooth-gear-in-Ti-6Al-4V-alloy-by-electrical-discharge.pdf |
4.6 MB |
| Computer-Aided Design/2010 Volume 42/3/Non-uniform-deformation-of-an-STL-model-satisfying-error-criteria.pdf |
5.5 MB |
| Computer-Aided Design/2010 Volume 42/3/Patch-layout-from-feature-graphs.pdf |
3.4 MB |
| Computer-Aided Design/2010 Volume 42/3/Recent-Special-Issues.pdf |
234 KB |
| Computer-Aided Design/2010 Volume 42/4/A-new-algorithm-for-finding-faces-in-wireframes.pdf |
12.7 MB |
| Computer-Aided Design/2010 Volume 42/4/Calendar.pdf |
228 KB |
| Computer-Aided Design/2010 Volume 42/4/Call-for-Papers.pdf |
245 KB |
| Computer-Aided Design/2010 Volume 42/4/Curvature-continuous-path-generation-for-autonomous-vehicle-using-B-spline-curves.pdf |
6.2 MB |
| Computer-Aided Design/2010 Volume 42/4/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/4/Interactive-virtual-try-on-clothing-design-systems.pdf |
6.4 MB |
| Computer-Aided Design/2010 Volume 42/4/Kernel-modeling-for-molecular-surfaces-using-a-uniform-solution.pdf |
11.1 MB |
| Computer-Aided Design/2010 Volume 42/4/Manifoldization-of-[beta]-shapes-in-O(n)-time.pdf |
6.1 MB |
| Computer-Aided Design/2010 Volume 42/4/Polynomial-blending-in-a-mesh-hole-filling-application.pdf |
4.7 MB |
| Computer-Aided Design/2010 Volume 42/4/Recent-Special-Issues.pdf |
234 KB |
| Computer-Aided Design/2010 Volume 42/5/A-collaborative-Design-for-Usability-approach-supported-by-Virtual-Reality-and-a-Multi-Agent-System-embedded-in-a-PLM-environment.pdf |
3.7 MB |
| Computer-Aided Design/2010 Volume 42/5/A-desktop-virtual-reality-based-interactive-modular-fixture-configuration-design-system.pdf |
2.8 MB |
| Computer-Aided Design/2010 Volume 42/5/AR-interfacing-with-prototype-3D-applications-based-on-user-centered-interactivity.pdf |
2.7 MB |
| Computer-Aided Design/2010 Volume 42/5/Calendar.pdf |
115 KB |
| Computer-Aided Design/2010 Volume 42/5/Contact-model,-fit-process-and,-foot-animation-for-the-virtual-simulator-of-the-footwear-comfort.pdf |
1 MB |
| Computer-Aided Design/2010 Volume 42/5/Development-scheme-of-haptic-based-system-for-interactive-deformable-simulation.pdf |
3.6 MB |
| Computer-Aided Design/2010 Volume 42/5/Distributed-design-review-using-tangible-augmented-technical-drawings.pdf |
3.2 MB |
| Computer-Aided Design/2010 Volume 42/5/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/5/Immersive-modeling-system-(IMMS)-for-personal-electronic-products-using-a-multi-modal-interface.pdf |
2.4 MB |
| Computer-Aided Design/2010 Volume 42/5/Improving-bi-manual-3D-input-in-CAD-modelling-by-part-rotation-optimisation.pdf |
1.3 MB |
| Computer-Aided Design/2010 Volume 42/5/Recent-Special-Issues.pdf |
128 KB |
| Computer-Aided Design/2010 Volume 42/5/Special-issue-of-Computer-Aided-Design-on-virtual-and-augmented-reality-technologies-in-product-design.pdf |
181 KB |
| Computer-Aided Design/2010 Volume 42/5/The-effect-of-sub-threshold-forces-on-human-performance-in-multi-modal-computer-aided-design.pdf |
690 KB |
| Computer-Aided Design/2010 Volume 42/5/VR-CAD-integration-Multimodal-immersive-interaction-and-advanced-haptic-paradigms-for-implicit-edition-of-CAD-models.pdf |
2.2 MB |
| Computer-Aided Design/2010 Volume 42/6/A-mesh-geometry-based-solution-to-mixed-dimensional-coupling.pdf |
6 MB |
| Computer-Aided Design/2010 Volume 42/6/Calendar.pdf |
115 KB |
| Computer-Aided Design/2010 Volume 42/6/Call-for-Papers.pdf |
134 KB |
| Computer-Aided Design/2010 Volume 42/6/Constrained-approximation-of-rational-Bezier-curves-based-on-a-matrix-expression-of-its-end-points-continuity-condition.pdf |
490 KB |
| Computer-Aided Design/2010 Volume 42/6/Cubic-B-spline-curve-approximation-by-curve-unclamping.pdf |
952 KB |
| Computer-Aided Design/2010 Volume 42/6/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/6/Gn-blending-multiple-surfaces-in-polar-coordinates.pdf |
1.6 MB |
| Computer-Aided Design/2010 Volume 42/6/Knowledge-guided-inference-for-voice-enabled-CAD.pdf |
3.9 MB |
| Computer-Aided Design/2010 Volume 42/6/Optimization-of-tool-positions-locally-based-on-the-BCELTP-for-5-axis-machining-of-free-form-surfaces.pdf |
2.1 MB |
| Computer-Aided Design/2010 Volume 42/6/Recent-Special-Issues.pdf |
128 KB |
| Computer-Aided Design/2010 Volume 42/6/Solid-modeling-of-polyhedral-objects-by-Layered-Depth-Normal-Images-on-the-GPU.pdf |
1.7 MB |
| Computer-Aided Design/2010 Volume 42/6/The-convergence-of-the-geometric-interpolation-algorithm.pdf |
273 KB |
| Computer-Aided Design/2010 Volume 42/6/Volumes-with-piecewise-quadratic-medial-surface-transforms-Computation-of-boundaries-and-trimmed-offsets.pdf |
1.2 MB |
| Computer-Aided Design/2010 Volume 42/7/A-look-ahead-command-generator-with-control-over-trajectory-and-chord-error-for-NURBS-curve-with-unknown-arc-length.pdf |
914 KB |
| Computer-Aided Design/2010 Volume 42/7/ASM-An-adaptive-simplification-method-for-3D-point-based-models.pdf |
3.2 MB |
| Computer-Aided Design/2010 Volume 42/7/Calendar.pdf |
115 KB |
| Computer-Aided Design/2010 Volume 42/7/Critical-point-analysis-using-domain-lifting-for-fast-geometry-queries.pdf |
2.3 MB |
| Computer-Aided Design/2010 Volume 42/7/Design-of-internal-pins-in-injection-mold-CAD-via-the-automatic-recognition-of-undercut-features.pdf |
3.7 MB |
| Computer-Aided Design/2010 Volume 42/7/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/7/Mesh-parameterization-based-on-one-step-inverse-forming.pdf |
2 MB |
| Computer-Aided Design/2010 Volume 42/7/Most-cited-paper-award.pdf |
174 KB |
| Computer-Aided Design/2010 Volume 42/7/Recent-development-in-CNC-machining-of-freeform-surfaces-A-state-of-the-art-review.pdf |
905 KB |
| Computer-Aided Design/2010 Volume 42/7/Recent-Special-Issues.pdf |
128 KB |
| Computer-Aided Design/2010 Volume 42/8/A-comparison-of-sampling-strategies-for-computing-general-sweeps.pdf |
4.3 MB |
| Computer-Aided Design/2010 Volume 42/8/A-study-on-X-FEM-in-continuum-structural-optimization-using-a-level-set-model.pdf |
2.2 MB |
| Computer-Aided Design/2010 Volume 42/8/Application-driven-shape-development.pdf |
162 KB |
| Computer-Aided Design/2010 Volume 42/8/Application-of-a-photogrammetry-based-system-to-measure-and-re-engineer-ship-hulls-and-ship-parts-An-industrial-practices-based-report.pdf |
3.3 MB |
| Computer-Aided Design/2010 Volume 42/8/Calendar.pdf |
115 KB |
| Computer-Aided Design/2010 Volume 42/8/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/8/Identification-and-optimization-of-key-process-parameters-in-noncontact-laser-scanning-for-reverse-engineering.pdf |
884 KB |
| Computer-Aided Design/2010 Volume 42/8/Local-parameterization-of-freeform-shapes-using-freeform-feature-recognition.pdf |
1.1 MB |
| Computer-Aided Design/2010 Volume 42/8/Merging-enriched-Finite-Element-triangle-meshes-for-fast-prototyping-of-alternate-solutions-in-the-context-of-industrial-maintenance.pdf |
3.8 MB |
| Computer-Aided Design/2010 Volume 42/8/Recent-Special-Issues.pdf |
128 KB |
| Computer-Aided Design/2010 Volume 42/8/Towards-recovery-of-complex-shapes-in-meshes-using-digital-images-for-reverse-engineering-applications.pdf |
4.3 MB |
| Computer-Aided Design/2010 Volume 42/8/Transformation-of-a-thin-walled-solid-model-into-a-surface-model-via-solid-deflation.pdf |
1.9 MB |
| Computer-Aided Design/2010 Volume 42/9/3D-hyperbolic-Voronoi-diagrams.pdf |
1.1 MB |
| Computer-Aided Design/2010 Volume 42/9/Algebraic-reduction-of-beams-for-CAD-integrated-analysis.pdf |
1.2 MB |
| Computer-Aided Design/2010 Volume 42/9/Bspline-approximation-of-circle-arc-and-straight-line-for-pocket-machining.pdf |
1.9 MB |
| Computer-Aided Design/2010 Volume 42/9/continuities-detection-in-triangular-meshes.pdf |
4.8 MB |
| Computer-Aided Design/2010 Volume 42/9/Drowned-in-data-but-thirsty-for-knowledge.pdf |
232 KB |
| Computer-Aided Design/2010 Volume 42/9/Editorial-Board.pdf |
44 KB |
| Computer-Aided Design/2010 Volume 42/9/G2-Hermite-interpolation-with-circular-precision.pdf |
692 KB |
| Computer-Aided Design/2010 Volume 42/9/Quick-GPS-A-new-CAT-system-for-single-part-tolerancing.pdf |
3.6 MB |
| Computer-Aided Design/2010 Volume 42/9/Recent-Special-Issues.pdf |
128 KB |
| Computer-Aided Design/2010 Volume 42/9/Reconstruction-of-intersecting-curved-solids-from-2D-orthographic-views.pdf |
534 KB |
| Computer-Aided Design/2010 Volume 42/9/Serial-3D-model-reconstruction-for-machining-evolution-of-rotational-parts-by-merging-semantic-and-graphic-process-planning-information.pdf |
2.8 MB |
| Computer-Aided Design/2010 Volume 42/9/Topologies-of-surfaces-on-molecules-and-their-computation-in-O(n)-time.pdf |
2.5 MB |
Magnet link
