| SolidWorks 2012 Essential Training/Exercise Files.zip |
54.4 MB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_01_Working with drawing templates.mov |
38.5 MB |
| SolidWorks 2012 Essential Training/21. Rendering/21_01_Rendering an image of a part or an assembly.mov |
29.2 MB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_02_Setting up drawing options and sheet properties.mov |
28.2 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_03_Mating parts together in an assembly.mov |
27.8 MB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_01_Extruding a sketch into a 3D object.mov |
27.6 MB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_02_Creating arcs in a sketch.mov |
25.3 MB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_01_Working with planes.mov |
24.4 MB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_03_Integrating Microsoft Excel to manage design tables.mov |
23.2 MB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_01_Sketching rectangles.mov |
22.7 MB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_03_Adding item notes.mov |
22.3 MB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_01_Calculating values for creating a threaded part.mov |
21.7 MB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_01_Using equations in refining sketching.mov |
21.5 MB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_04_Adding model views to a drawing.mov |
21.3 MB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_04_Refining a loft shape with guide curves.mov |
19.9 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_05_Working with subassemblies y.mov |
19.8 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_06_Patterning in assemblies.mov |
19.8 MB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_01_Getting started with the Hole Wizard.mov |
19.3 MB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_01_Mating parts with coincident, parallel, and distance mates l.mov |
19.2 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_08_Working with pre-made parts bundled with SolidWorks Professional and SolidWorks Premium.mov |
18.3 MB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_02_Understanding hole types and standards.mov |
17.6 MB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_02_Linking to layout sketches.mov |
17.4 MB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_04_Mirroring objects.mov |
17.4 MB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_05_Including part balloons in an assembly drawing.mov |
17.4 MB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_03_Understanding internal and external threads s.mov |
16.8 MB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_03_Drawing splines in a sketch.mov |
16.8 MB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_02_Using Revolve to create 3D parts around a circular axis.mov |
16.8 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_05_Dimensioning a sketch to define specific size attributes.mov |
16.7 MB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_01_Using fillets and chamfers to create smooth or angled corners.mov |
16.7 MB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_01_Using Extruded Cut to trim parts of a 3D object.mov |
16.4 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_01_Understanding the tools for beginning a new assembly.mov |
16.2 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_04_Matching part sizes accurately in the parametric prototyping environment.mov |
16.1 MB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_01_Creating general dimension notations.mov |
16.1 MB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_04_Building an exploded view for an assembly drawing.mov |
16.1 MB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_03_Working with the coordinate system and individual points.mov |
16 MB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_02_Mating parts with tangent and width mates.mov |
15.8 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_02_Identifying steps in creating an assembly.mov |
15.6 MB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_04_Applying auto dimensions.mov |
15.5 MB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_02_Creating chain and ordinate dimensions.mov |
15.5 MB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_03_Using Loft to create a complex shape.mov |
15.5 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_04_Understanding relationship types.mov |
15.1 MB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_03_Positioning holes in layout sketches.mov |
15 MB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_02_Adding center marks and centerlines to a drawing.mov |
14.8 MB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_01_Linking sketches to other parts.mov |
14.4 MB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_01_Creating hole callouts.mov |
14.1 MB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_02_Trimming with the revolve cut.mov |
13.9 MB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_02_Creating repeating rectangular patterns.mov |
13.9 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_06_Setting system options, units, and templates.mov |
13.7 MB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_04_Saving, renaming, and managing files.mov |
13.6 MB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_03_Starting a new sketch.mov |
13.6 MB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_04_Sketching polygons.mov |
13.5 MB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_05_Using Sweep to create wire and pipe shapes.mov |
13.4 MB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_03_Dimensioning holes and curved features.mov |
13.1 MB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_04_Trimming with the sweep cut.mov |
13 MB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_03_Adding a title block and sheet properties to an assembly drawing.mov |
12.9 MB |
| SolidWorks 2012 Essential Training/10. Blocks/10_03_Designing with blocks.mov |
12.8 MB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_02_Using a helix sweep path to create a thread.mov |
12.7 MB |
| SolidWorks 2012 Essential Training/10. Blocks/10_01_Working with reusable sketches using blocks.mov |
12.6 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_07_Using construction lines to place features with precision.mov |
12.4 MB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_02_Including a bill of materials.mov |
12.4 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_02_Using the Circle tool.mov |
12.3 MB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_02_ Working with complex calculations.mov |
12.3 MB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_03_Touring the shortcut bar and identifying essential keys.mov |
12 MB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_01_Launching SolidWorks for the first time.mov |
12 MB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_01_Understanding the 3D world.mov |
11.9 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_06_Creating repeating patterns in a sketch.mov |
11.8 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_01_Sketching lines and center lines.mov |
11.7 MB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_03_Using the Hole Wizard in context.mov |
11.4 MB |
| SolidWorks 2012 Essential Training/10. Blocks/10_02_Creating blocks.mov |
11.3 MB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_04_Drawing revisions.mov |
11.3 MB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_07_Downloading pre-made parts from the Internet.mov |
11.2 MB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_02_The six steps used in almost all modeling features s.mov |
11 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_04_Erasing, undoing, and redoing actions.mov |
11 MB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_03_Adding and removing relationships.mov |
10.7 MB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_03_Creating repeating circular patterns.mov |
10.5 MB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_03_Trimming with the loft cut.mov |
10.2 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_01_Trimming and extending portions of a sketch.mov |
10.1 MB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_02_Placing and using axes.mov |
10 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_02_Creating offset geometry.mov |
9.8 MB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_05_Creating hollow objects with Shell and Draft.mov |
9.8 MB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_01_Adding assemblies to drawings.mov |
9.7 MB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_04_Making assemblies using part configurations.mov |
9.6 MB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_02_Accessing and customizing the Ribbon.mov |
9.1 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_03_Moving, copying, and rotating elements.mov |
8.5 MB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_04_Mating parts by aligning planes.mov |
8.4 MB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_05_Mirroring part of a sketch.mov |
8.4 MB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_03_Choosing the correct projection angle - first angle vs third angle.mov |
8 MB |
| SolidWorks 2012 Essential Training/00. Introduction/00_01_Welcome.mov |
7.3 MB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_03_Mating parts along a path.mov |
6.7 MB |
| SolidWorks 2012 Essential Training/22. Conclusion/22_01_Next steps.mov |
4.3 MB |
| SolidWorks 2012 Essential Training/00. Introduction/00_02_Using the exercise files.mov |
3.1 MB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_01_Working with drawing templates.srt |
22 KB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_02_Setting up drawing options and sheet properties.srt |
16 KB |
| SolidWorks 2012 Essential Training/21. Rendering/21_01_Rendering an image of a part or an assembly.srt |
16 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_03_Mating parts together in an assembly.srt |
15 KB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_03_Integrating Microsoft Excel to manage design tables.srt |
14 KB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_01_Extruding a sketch into a 3D object.srt |
14 KB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_04_Adding model views to a drawing.srt |
14 KB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_02_Creating arcs in a sketch.srt |
13 KB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_01_Working with planes.srt |
13 KB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_01_Using equations in refining sketching.srt |
13 KB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_03_Adding item notes.srt |
12 KB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_01_Calculating values for creating a threaded part.srt |
12 KB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_01_Sketching rectangles.srt |
12 KB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_01_Getting started with the Hole Wizard.srt |
11 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_08_Working with pre-made parts bundled with SolidWorks Professional and SolidWorks Premium.srt |
11 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_06_Patterning in assemblies.srt |
11 KB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_01_Mating parts with coincident, parallel, and distance mates l.srt |
11 KB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_02_Understanding hole types and standards.srt |
11 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_05_Working with subassemblies y.srt |
11 KB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_02_Creating chain and ordinate dimensions.srt |
10 KB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_02_Linking to layout sketches.srt |
10 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_05_Dimensioning a sketch to define specific size attributes.srt |
10 KB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_04_Refining a loft shape with guide curves.srt |
10 KB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_04_Saving, renaming, and managing files.srt |
10 KB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_01_Creating general dimension notations.srt |
10 KB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_04_Applying auto dimensions.srt |
10 KB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_05_Including part balloons in an assembly drawing.srt |
9 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_02_Identifying steps in creating an assembly.srt |
9 KB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_03_Understanding internal and external threads s.srt |
9 KB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_04_Mirroring objects.srt |
9 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_01_Understanding the tools for beginning a new assembly.srt |
9 KB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_02_Mating parts with tangent and width mates.srt |
9 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_04_Matching part sizes accurately in the parametric prototyping environment.srt |
9 KB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_02_Using Revolve to create 3D parts around a circular axis.srt |
9 KB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_03_Drawing splines in a sketch.srt |
9 KB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_03_Working with the coordinate system and individual point.srt |
9 KB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_01_Using Extruded Cut to trim parts of a 3D object.srt |
9 KB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_01_Creating hole callouts.srt |
9 KB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_04_Building an exploded view for an assembly drawing.srt |
8 KB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_01_Linking sketches to other parts.srt |
8 KB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_02_Adding center marks and centerlines to a drawing.srt |
8 KB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_01_Launching SolidWorks for the first time.srt |
8 KB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_01_Using fillets and chamfers to create smooth or angled corners.srt |
8 KB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_03_Starting a new sketch.srt |
8 KB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_03_Using Loft to create a complex shape.srt |
8 KB |
| SolidWorks 2012 Essential Training/18. Adding Dimension Notations to a Drawing/18_03_Dimensioning holes and curved features.srt |
8 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_04_Understanding relationship types.srt |
8 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_06_Setting system options, units, and templates.srt |
8 KB |
| SolidWorks 2012 Essential Training/10. Blocks/10_01_Working with reusable sketches using blocks.srt |
8 KB |
| SolidWorks 2012 Essential Training/13. Hole Wizard/13_03_Positioning holes in layout sketches.srt |
8 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_01_Sketching lines and center lines.srt |
7 KB |
| SolidWorks 2012 Essential Training/15. Creating Threaded Parts/15_02_Using a helix sweep path to create a thread.srt |
7 KB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_02_Trimming with the revolve cut.srt |
7 KB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_03_Adding a title block and sheet properties to an assembly drawing.srt |
7 KB |
| SolidWorks 2012 Essential Training/07. Building 3D Geometry/07_05_Using Sweep to create wire and pipe shapes.srt |
7 KB |
| SolidWorks 2012 Essential Training/04. Relationships and Sketching Tools/04_04_Sketching polygons.srt |
7 KB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_02_ Working with complex calculations.srt |
7 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_02_Using the Circle tool.srt |
7 KB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_02_Creating repeating rectangular patterns.srt |
7 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_01_Trimming and extending portions of a sketch.srt |
7 KB |
| SolidWorks 2012 Essential Training/19. Adding General Annotations/19_04_Drawing revisions.srt |
7 KB |
| SolidWorks 2012 Essential Training/10. Blocks/10_03_Designing with blocks.srt |
7 KB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_02_The six steps used in almost all modeling features s.srt |
6 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_07_Using construction lines to place features with precision.srt |
6 KB |
| SolidWorks 2012 Essential Training/02. Introducing the 3D Workspace/02_01_Understanding the 3D world.srt |
6 KB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_04_Trimming with the sweep cut.srt |
6 KB |
| SolidWorks 2012 Essential Training/14. In-Context Modeling/14_03_Using the Hole Wizard in context.srt |
6 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_06_Creating repeating patterns in a sketch.srt |
6 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_04_Erasing, undoing, and redoing actions.srt |
6 KB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_03_Touring the shortcut bar and identifying essential keys.srt |
6 KB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_02_Including a bill of materials.srt |
6 KB |
| SolidWorks 2012 Essential Training/11. Assembly - Putting it All Together/11_07_Downloading pre-made parts from the Internet.srt |
6 KB |
| SolidWorks 2012 Essential Training/03. Basic Sketching Tools/03_03_Adding and removing relationships.srt |
6 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_02_Creating offset geometry.srt |
6 KB |
| SolidWorks 2012 Essential Training/10. Blocks/10_02_Creating blocks.srt |
6 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_03_Moving, copying, and rotating elements.srt |
5 KB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_03_Creating repeating circular patterns.srt |
5 KB |
| SolidWorks 2012 Essential Training/20. Assembly Drawings/20_01_Adding assemblies to drawings.srt |
5 KB |
| SolidWorks 2012 Essential Training/16. Equations and Design Tables/16_04_Making assemblies using part configurations.srt |
5 KB |
| SolidWorks 2012 Essential Training/17. Part Drawings/17_03_Choosing the correct projection angle - first angle vs third angle.srt |
5 KB |
| SolidWorks 2012 Essential Training/06. Reference Geometry/06_02_Placing and using axes.srt |
5 KB |
| SolidWorks 2012 Essential Training/05. Sketch-Editing Tools/05_05_Mirroring part of a sketch.srt |
5 KB |
| SolidWorks 2012 Essential Training/09. Refining Geometry/09_05_Creating hollow objects with Shell and Draft.srt |
5 KB |
| SolidWorks 2012 Essential Training/01. Touring the Interface/01_02_Accessing and customizing the Ribbon.srt |
5 KB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_04_Mating parts by aligning planes.srt |
5 KB |
| SolidWorks 2012 Essential Training/08. Removing Material/08_03_Trimming with the loft cut.srt |
5 KB |
| SolidWorks 2012 Essential Training/12. Advanced Mates/12_03_Mating parts along a path.srt |
3 KB |
| SolidWorks 2012 Essential Training/22. Conclusion/22_01_Next steps.srt |
2 KB |
| SolidWorks 2012 Essential Training/00. Introduction/00_02_Using the exercise files.srt |
2 KB |
| SolidWorks 2012 Essential Training/00. Introduction/00_01_Welcome.srt |
1 KB |
Magnet link
