| Lynda - Learning Siemens NX/1.Introduction/01.Get ahead with Siemens NX.en.srt |
955 B |
| Lynda - Learning Siemens NX/1.Introduction/01.Get ahead with Siemens NX.mp4 |
3.3 MB |
| Lynda - Learning Siemens NX/1.Introduction/02.How to access and create a part file.en.srt |
6 KB |
| Lynda - Learning Siemens NX/1.Introduction/02.How to access and create a part file.mp4 |
9.6 MB |
| Lynda - Learning Siemens NX/1.Introduction/03.Preferences.en.srt |
7 KB |
| Lynda - Learning Siemens NX/1.Introduction/03.Preferences.mp4 |
11.3 MB |
| Lynda - Learning Siemens NX/10.Conclusion/45.Goodbye.en.srt |
516 B |
| Lynda - Learning Siemens NX/10.Conclusion/45.Goodbye.mp4 |
970 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/04.What you're looking at.en.srt |
7 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/04.What you're looking at.mp4 |
11.8 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/05.Understanding the menus.en.srt |
4 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/05.Understanding the menus.mp4 |
6 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/06.Navigators.en.srt |
5 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/06.Navigators.mp4 |
7.9 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/07.Ribbon, toolbars, and icons.en.srt |
12 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/07.Ribbon, toolbars, and icons.mp4 |
20.1 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/08.Work Coordinate System (WCS) and triad.en.srt |
7 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/08.Work Coordinate System (WCS) and triad.mp4 |
10.8 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/09.Status and cue lines.en.srt |
5 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/09.Status and cue lines.mp4 |
8.5 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/10.Mouse functions.en.srt |
11 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/10.Mouse functions.mp4 |
23.1 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/11.Selection intent.en.srt |
13 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/11.Selection intent.mp4 |
24.8 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/12.Hide and show.en.srt |
9 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/12.Hide and show.mp4 |
16.3 MB |
| Lynda - Learning Siemens NX/2.1. User Interface/13.File organization.en.srt |
14 KB |
| Lynda - Learning Siemens NX/2.1. User Interface/13.File organization.mp4 |
24.8 MB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/14.Creating a sketch.en.srt |
1 KB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/14.Creating a sketch.mp4 |
3.4 MB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/15.Making a solid.en.srt |
1 KB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/15.Making a solid.mp4 |
2.5 MB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/16.Detail features.en.srt |
2 KB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/16.Detail features.mp4 |
2.9 MB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/17.Editing methods.en.srt |
3 KB |
| Lynda - Learning Siemens NX/3.2. Part Design Workflow/17.Editing methods.mp4 |
5.1 MB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/18.Positioning a sketch.en.srt |
9 KB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/18.Positioning a sketch.mp4 |
16 MB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/19.Entering and exiting Sketcher.en.srt |
14 KB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/19.Entering and exiting Sketcher.mp4 |
22.9 MB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/20.Sketcher options.en.srt |
5 KB |
| Lynda - Learning Siemens NX/4.3. Sketch Options and Settings/20.Sketcher options.mp4 |
7.7 MB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/21.Curve creation.en.srt |
19 KB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/21.Curve creation.mp4 |
35.1 MB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/22.Curve modification.en.srt |
13 KB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/22.Curve modification.mp4 |
23.5 MB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/23.Geometric constraints.en.srt |
14 KB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/23.Geometric constraints.mp4 |
24.7 MB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/24.Dimensional constraints.en.srt |
11 KB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/24.Dimensional constraints.mp4 |
19.5 MB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/25.Project - Valve housing sketches.en.srt |
8 KB |
| Lynda - Learning Siemens NX/5.4. Creating and Editing Sketches/25.Project - Valve housing sketches.mp4 |
16.4 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/26.Revolve.en.srt |
6 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/26.Revolve.mp4 |
14 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/27.Extrude.en.srt |
11 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/27.Extrude.mp4 |
21.7 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/28.Boolean functions.en.srt |
8 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/28.Boolean functions.mp4 |
17.1 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/29.Hole.en.srt |
17 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/29.Hole.mp4 |
32.6 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/30.Edge blend.en.srt |
13 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/30.Edge blend.mp4 |
26.8 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/31.Patterns.en.srt |
13 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/31.Patterns.mp4 |
27.8 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/32.Mirror geometry.en.srt |
6 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/32.Mirror geometry.mp4 |
12.5 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/33.Project - Valve housing model 1.en.srt |
7 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/33.Project - Valve housing model 1.mp4 |
15.7 MB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/34.Project - Valve housing model 2.en.srt |
9 KB |
| Lynda - Learning Siemens NX/6.5. Modeling Application/34.Project - Valve housing model 2.mp4 |
23.9 MB |
| Lynda - Learning Siemens NX/7.6. Measures/35.Measure tools.en.srt |
13 KB |
| Lynda - Learning Siemens NX/7.6. Measures/35.Measure tools.mp4 |
24.8 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/36.Inserting parts into an assembly.en.srt |
15 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/36.Inserting parts into an assembly.mp4 |
25.8 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/37.Moving parts around.en.srt |
6 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/37.Moving parts around.mp4 |
12.5 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/38.Constraints and relationships.en.srt |
10 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/38.Constraints and relationships.mp4 |
22 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/39.Constraints and reference sets.en.srt |
8 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/39.Constraints and reference sets.mp4 |
19.8 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/40.Contextual edits.en.srt |
9 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/40.Contextual edits.mp4 |
22.2 MB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/41.Saving and loading an assembly.en.srt |
10 KB |
| Lynda - Learning Siemens NX/8.7. Building an Assembly/41.Saving and loading an assembly.mp4 |
17.2 MB |
| Lynda - Learning Siemens NX/9.8. Drafting/42.Drawing page setup and creating views.en.srt |
10 KB |
| Lynda - Learning Siemens NX/9.8. Drafting/42.Drawing page setup and creating views.mp4 |
17.8 MB |
| Lynda - Learning Siemens NX/9.8. Drafting/43.Dimensions.en.srt |
12 KB |
| Lynda - Learning Siemens NX/9.8. Drafting/43.Dimensions.mp4 |
21.6 MB |
| Lynda - Learning Siemens NX/9.8. Drafting/44.Text and editor.en.srt |
12 KB |
| Lynda - Learning Siemens NX/9.8. Drafting/44.Text and editor.mp4 |
19.9 MB |
| Lynda - Learning Siemens NX/Exercise Files/Ex_Files_Learning_Siemens_NX.zip |
9.8 MB |
Magnet link
