| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/02 - Use the exercise files.en.srt |
1022 B |
| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/01 - Design products with Autodesk Inventor 2020.en.srt |
1 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/15. Conclusion/57 - Next steps.en.srt |
2 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/11 - Use the browser and right-click menu.en.srt |
3 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/03 - Certification overview.en.srt |
3 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/13 - Work with origin geometry.en.srt |
4 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/06 - Review different file types.en.srt |
4 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/04 - Explore major workflow steps.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/24 - Understand work features.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/02. Leverage the Project/08 - Set up the exercise files project file.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/27 - Create a work point and work axis.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/43 - Introduction to assemblies.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/02. Leverage the Project/07 - Create a practice project.en.srt |
5 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/10 - Navigate using the navigation tools.en.srt |
6 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/21 - Extend and trim sketch geometry.en.srt |
6 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/CONTENT.md |
6 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/29 - Part feature introduction.en.srt |
6 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/25 - Create offset work planes.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/22 - Offset sketch geometry.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/18 - Construction geometry.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/41 - Create circular patterns.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/42 - Mirror part features.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/55 - Change dimension precision.en.srt |
7 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/48 - Insert constraint.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/53 - Create detail views.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/47 - Angle constraint.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/37 - Add threaded holes.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/31 - Create an extrusion to next face.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/05 - Home dashboard.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/38 - Modify edges with fillets and chamfers.en.srt |
8 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/12 - Introduce sketching.en.srt |
9 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/28 - Project geometry.en.srt |
9 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/35 - Add concentric holes.en.srt |
9 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/09 - Navigate using the ViewCube.en.srt |
10 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/56 - Create baseline, ordinate, and chain dimensions.en.srt |
10 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/23 - Pattern and mirror sketch geometry.en.srt |
10 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/33 - Create a sweep.en.srt |
11 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/39 - Hollow a part with the shell feature.en.srt |
11 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/26 - Create additional types of work planes.en.srt |
11 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/15 - Draw lines.en.srt |
12 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/14 - Understand constraints.en.srt |
12 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/50 - Explore initial drawing creation.en.srt |
12 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/20 - Parameters.en.srt |
12 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/49 - Drive constraints.en.srt |
12 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/40 - Create rectangular feature patterns.en.srt |
13 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/54 - Create general dimensions.en.srt |
13 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/36 - Add linear holes.en.srt |
13 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/44 - Place components.en.srt |
13 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/51 - Place base and projected views.en.srt |
14 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/19 - Dimensioning.en.srt |
14 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/30 - Create a base extrusion.en.srt |
14 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/32 - Create revolves.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/17 - Create splines.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/52 - Create section views.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/46 - Mate and Flush constraint.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/45 - Create and edit components in an assembly.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/16 - Create rectangles and arcs.en.srt |
15 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/34 - Complex shapes with the Loft tool.en.srt |
16 KB |
| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/02 - Use the exercise files.mp4 |
1.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/01 - Design products with Autodesk Inventor 2020.mp4 |
2.7 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/15. Conclusion/57 - Next steps.mp4 |
3 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/11 - Use the browser and right-click menu.mp4 |
4.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/00. Introduction/03 - Certification overview.mp4 |
5.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/02. Leverage the Project/08 - Set up the exercise files project file.mp4 |
6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/02. Leverage the Project/07 - Create a practice project.mp4 |
6.4 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/13 - Work with origin geometry.mp4 |
6.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/04 - Explore major workflow steps.mp4 |
6.7 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/06 - Review different file types.mp4 |
6.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/27 - Create a work point and work axis.mp4 |
7.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/43 - Introduction to assemblies.mp4 |
7.7 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/24 - Understand work features.mp4 |
8.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/21 - Extend and trim sketch geometry.mp4 |
9.2 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/29 - Part feature introduction.mp4 |
9.2 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/22 - Offset sketch geometry.mp4 |
9.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/01. Basic Concepts/05 - Home dashboard.mp4 |
9.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/41 - Create circular patterns.mp4 |
9.8 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/25 - Create offset work planes.mp4 |
9.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/53 - Create detail views.mp4 |
10.2 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/55 - Change dimension precision.mp4 |
10.3 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/18 - Construction geometry.mp4 |
10.8 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/50 - Explore initial drawing creation.mp4 |
11 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/42 - Mirror part features.mp4 |
11 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/48 - Insert constraint.mp4 |
11.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/47 - Angle constraint.mp4 |
11.4 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/31 - Create an extrusion to next face.mp4 |
11.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/37 - Add threaded holes.mp4 |
11.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/56 - Create baseline, ordinate, and chain dimensions.mp4 |
12.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/38 - Modify edges with fillets and chamfers.mp4 |
12.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/35 - Add concentric holes.mp4 |
13.2 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/28 - Project geometry.mp4 |
13.3 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/12 - Introduce sketching.mp4 |
13.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/10 - Navigate using the navigation tools.mp4 |
14 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/14. Create Basic Annotations/54 - Create general dimensions.mp4 |
15.4 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/03. Navigate the Interface/09 - Navigate using the ViewCube.mp4 |
15.5 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/51 - Place base and projected views.mp4 |
15.7 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/06. Modify Sketch Geometry/23 - Pattern and mirror sketch geometry.mp4 |
15.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/33 - Create a sweep.mp4 |
15.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/10. Create Patterns of Features/40 - Create rectangular feature patterns.mp4 |
16.4 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/39 - Hollow a part with the shell feature.mp4 |
17 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/49 - Drive constraints.mp4 |
17.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/20 - Parameters.mp4 |
17.3 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/07. Work Features and Projections/26 - Create additional types of work planes.mp4 |
17.4 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/15 - Draw lines.mp4 |
17.5 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/44 - Place components.mp4 |
17.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/04. Sketch Concepts/14 - Understand constraints.mp4 |
19.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/09. Build Parts with Placed Features/36 - Add linear holes.mp4 |
19.9 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/30 - Create a base extrusion.mp4 |
20.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/19 - Dimensioning.mp4 |
21.3 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/13. Create Drawing Views/52 - Create section views.mp4 |
21.6 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/17 - Create splines.mp4 |
23 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/32 - Create revolves.mp4 |
23 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/08. Understand Part Modeling/34 - Complex shapes with the Loft tool.mp4 |
25.7 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/11. Add Parts to an Assembly File/45 - Create and edit components in an assembly.mp4 |
27 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/05. Create Sketch Geometry/16 - Create rectangles and arcs.mp4 |
27.1 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/12. Use Constraints to Position Parts/46 - Mate and Flush constraint.mp4 |
31 MB |
| Lynda - Autodesk Inventor 2020 Essential Training/Ex_Files_Autodesk_Inventor_2020_EssT.zip |
83.3 MB |
Magnet link
