| CD สอน SolidWorks/CD1/autorun.inf |
37 B |
| CD สอน SolidWorks/CD1/exercises/Lesson01/Case Study/ADD DRAFT.sldprt |
189 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson01/Case Study/Bracket.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson01/Case Study/Design Intent 1.SLDPRT |
66 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson01/Case Study/Design Intent 2.SLDPRT |
63 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson01/Case Study/Design Intent 3.SLDPRT |
73 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson02/Case Study/Built Parts/Plate.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson02/Exercises/Built Parts/Sketching Horizontal and Vertical Lines.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson02/Exercises/Built Parts/Sketching Lines with Inferences.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson02/Exercises/Built Parts/Sketching Lines.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Case Study/Built Parts/Basic.SLDDRW |
192 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Case Study/Built Parts/Basic.SLDPRT |
215 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Case Study/GlassBox.SLDPRT |
282 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Basic-Changes.SLDPRT |
225 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Basic-Changes.SLDPRT |
207 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Bracket.SLDPRT |
112 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Gasket.SLDDRW |
136 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Gasket.SLDPRT |
128 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Plate.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Built Parts/Working with Fractions.SLDPRT |
131 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson03/Exercises/Gasket.SLDPRT |
134 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Case Study/Built Parts/Ratchet Body.SLDPRT |
819 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Built Parts/Base Bracket.SLDPRT |
151 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Built Parts/Guide.SLDPRT |
124 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Built Parts/Pulley.SLDPRT |
344 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Built Parts/Ratchet Handle Changes.SLDPRT |
397 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Built Parts/Tool Holder.SLDPRT |
405 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Pulley.SLDPRT |
76 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson04/Exercises/Ratchet Handle Changes.SLDPRT |
380 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Case Study/Built Parts/Symmetry_Sketching.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Case Study/Built Parts/Thin_Feature.SLDPRT |
182 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Case Study/Symmetry_Sketching.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Case Study/Thin_Feature.SLDPRT |
41 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Arm.SLDPRT |
322 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Full Rounds.SLDPRT |
881 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Guide.SLDPRT |
130 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Hook.SLDPRT |
181 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Idler Arm.SLDPRT |
402 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Mirror Body.SLDPRT |
493 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Built Parts/Wedge Block.SLDPRT |
78 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson05/Exercises/Mirror Body.SLDPRT |
87 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Add_Palette_Feature.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Add_Palette_Feature.SLDPRT |
171 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Circular_Pattern.SLDPRT |
285 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Grate.SLDPRT |
736 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Hex_Cut.SLDLFP |
83 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Library_Feature_Source.SLDPRT |
118 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Patterns_AddPF.SLDPRT |
171 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Patterns_CurveDriven.SLDPRT |
120 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Patterns_Curve_Driven.SLDPRT |
120 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/PowerBlock.SLDPRT |
114 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Table&Sketch_Driven.SLDPRT |
101 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Using Bodies in Patterns [PAD].SLDPRT |
135 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Using Faces in Patterns [PAD].SLDPRT |
188 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Using Faces in Patterns.SLDPRT |
188 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Using_Feature_Palette.SLDPRT |
181 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Built Parts/Vary_Sketch.SLDPRT |
276 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Circular_Pattern.SLDPRT |
231 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Grate.SLDPRT |
97 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Library_Feature_Source.SLDPRT |
112 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Patterns_AddPF.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Patterns_CurveDriven.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Patterns_Curve_Driven.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/PowerBlock.SLDPRT |
329 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Table&Sketch_Driven.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Using Bodies in Patterns [PAD].SLDPRT |
124 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Using Faces in Patterns [PAD].SLDPRT |
79 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Using Faces in Patterns.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Using_Feature_Palette.SLDPRT |
140 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Case Study/Vary_Sketch.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Base _LF.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/BoneWrench.SLDPRT |
218 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/BoneWrench.SLDPRT |
428 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Curve Driven Pattern.SLDPRT |
234 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Linear & Mirror.SLDPRT |
193 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Linear Pattern.SLDPRT |
205 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Lug.SLDLFP |
102 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Skipping Instances.SLDPRT |
467 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Table Driven Pattern[SKETCH].SLDPRT |
218 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Table Driven Pattern[TABLE].SLDPRT |
214 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Use_LF.SLDPRT |
283 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Built Parts/Vary Sketch Lab.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Curve Driven Pattern.SLDPRT |
96 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/HexCut.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Linear & Mirror.SLDPRT |
115 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Linear Pattern.SLDPRT |
108 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/pattern file.sldptab |
81 B |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/pattern file.txt |
81 B |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Table Driven Pattern.SLDPRT |
108 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Use_LF.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson06/Exercises/Vary Sketch Lab.SLDPRT |
95 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/Built Parts/Hand Wheel Assembly.SLDASM |
1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/Built Parts/Handle.SLDPRT |
150 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/Built Parts/Handwheel.SLDPRT |
1.4 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/Built Parts/Shaft.SLDPRT |
109 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/Built Parts/USER_MATERIALS.sldmat |
2 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Case Study/shaft.SLDPRT |
138 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Compression Plate.SLDPRT |
412 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Flange.SLDPRT |
145 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Hand Wheel Changes.SLDPRT |
606 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Pump Cover.SLDPRT |
260 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Tool Post.SLDPRT |
133 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Built Parts/Wheel.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Hand Wheel Changes.SLDPRT |
730 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson07/Exercises/Pump Cover.SLDPRT |
248 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Case Study/Built Parts/Shelling&Ribs.SLDPRT |
1.6 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Case Study/rib1.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Case Study/rib2.SLDPRT |
76 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Case Study/rib3.SLDPRT |
106 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Case Study/Shelling&Ribs.SLDPRT |
865 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Blow Dryer.SLDPRT |
720 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Ceiling Fan Ball.SLDPRT |
427 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Clevis.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Ice Cube Tray.SLDPRT |
1.5 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Motor Shield.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Built Parts/Pump Cover.SLDPRT |
476 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson08/Exercises/Ice Cube Tray.SLDPRT |
81 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/DesignTable.SLDPRT |
720 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/Part_DT.SLDDRW |
270 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/Part_DT.SLDPRT |
761 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/Part_DT.xls |
22 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/Ratchet Body.SLDPRT |
664 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Built Parts/Unistrut Design Table.xls |
14 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/DesignTable.SLDPRT |
280 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/FEA_config.sldprt |
196 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/OneFeature.SLDPRT |
118 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Part_DT.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Part_DT.xls |
16 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/PIN.SLDPRT |
40 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/Ratchet Body.SLDPRT |
425 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Case Study/swxJRNL.swj |
1 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Auto-Create.sldprt |
62 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Auto-Create.sldprt |
86 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/config part.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Design for Configs.SLDDRW |
118 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Design for Configs.SLDPRT |
238 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Design for Configs.xls |
28 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Linked.SLDPRT |
88 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/LinkedDT.xls |
10 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/PART DESIGN TABLE.sldprt |
343 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Built Parts/Speaker.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/config part.SLDPRT |
219 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Design Table.xls |
14 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Linked.SLDPRT |
87 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Part Design Table.sldprt |
60 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson09/Exercises/Speaker.SLDPRT |
230 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Case Study/Built Parts/Editing CS.sldprt |
286 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Case Study/Built Parts/WorkingConfigs.SLDPRT |
211 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Case Study/Editing CS.sldprt |
108 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Case Study/Partial_Editing CS.SLDPRT |
182 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Case Study/WorkingConfigs.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/ADD DRAFT.sldprt |
190 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/ADD DRAFT.sldprt |
358 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Changes.SLDPRT |
258 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #1.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #2.SLDPRT |
81 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #3.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #4.SLDPRT |
85 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/EDITING.sldprt |
100 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/ERRORS.SLDPRT |
242 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Exercise 7.SLDPRT |
63 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Handle Arm.SLDPRT |
158 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Oil Pump.SLDPRT |
126 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Built Parts/Working with Configurations.SLDPRT |
972 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Changes.SLDPRT |
143 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Contour Sketches #1.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Contour Sketches #2.SLDPRT |
52 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Contour Sketches #3.SLDPRT |
53 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Contour Sketches #4.SLDPRT |
53 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/EDITING.sldprt |
73 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/ERRORS.SLDPRT |
123 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Handle Arm.SLDPRT |
39 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Oil Pump.SLDPRT |
88 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson10/Exercises/Working with Configurations.SLDPRT |
139 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/bracket.sldprt |
63 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/bracket.sldprt |
71 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/crank sub.SLDASM |
419 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/crank-arm.sldprt |
67 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/crank-knob.sldprt |
286 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/crank-shaft.sldprt |
215 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/pin.sldprt |
47 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/spider.sldprt |
93 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/Universal Joint.SLDASM |
668 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/Yoke_female.sldprt |
169 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Built Parts/Yoke_male.sldprt |
178 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/crank-arm.sldprt |
63 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/crank-knob.sldprt |
282 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/crank-shaft.sldprt |
223 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/pin.sldprt |
45 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/spider.sldprt |
92 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Yoke_female.sldprt |
165 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Case Study/Yoke_male.sldprt |
174 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Basic Mates/Brace.SLDPRT |
46 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Basic Mates/EndConnect.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Basic Mates/RectBase.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Basic Mates/Basic Mates Assembly.SLDASM |
75 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Basic Mates/Brace.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Basic Mates/EndConnect.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Basic Mates/RectBase.SLDPRT |
68 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Cover Plate.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Cover_Pl&Lug.SLDPRT |
170 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Gearbox Assembly.SLDASM |
1.1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Housing.SLDPRT |
311 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Offset Shaft.SLDPRT |
74 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Worm Gear Shaft.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Worm Gear.SLDPRT |
277 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Base.SLDPRT |
285 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Crank.SLDASM |
561 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Grinder Assy.SLDASM |
612 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Handle.SLDPRT |
96 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Knob.SLDPRT |
686 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/RH Machine Screw.SLDPRT |
349 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Slider.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Truss Head Screw.SLDPRT |
304 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Allen Wrench.SLDPRT |
500 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Base Sheet Metal.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/part configs.SLDASM |
234 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Pin.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Washer.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/bracket.sldprt |
73 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Changes.SLDASM |
558 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-arm.sldprt |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-assy.sldasm |
171 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-knob.sldprt |
119 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-shaft.sldprt |
125 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/pin.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Set Screw.SLDPRT |
64 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/spider.sldprt |
75 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Yoke_female.sldprt |
157 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Yoke_male.sldprt |
165 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Cover Plate.SLDPRT |
279 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Cover_Pl&Lug.SLDPRT |
156 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Housing.SLDPRT |
289 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Offset Shaft.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Worm Gear Shaft.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Gearbox Assy/Worm Gear.SLDPRT |
265 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/Base.SLDPRT |
259 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/Handle.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/Knob.SLDPRT |
276 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/RH Machine Screw.SLDPRT |
216 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/Slider.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Grinder Assy/Truss Head Screw.SLDPRT |
133 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Part DT in Assy/Allen Wrench.SLDPRT |
294 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Part DT in Assy/Base Sheet Metal.SLDPRT |
110 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Part DT in Assy/part configs.SLDASM |
146 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Part DT in Assy/Pin.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/Part DT in Assy/Washer.SLDPRT |
43 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/bracket.sldprt |
63 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/Changes.SLDASM |
338 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/crank-arm.sldprt |
60 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/crank-assy.sldasm |
166 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/crank-knob.sldprt |
111 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/crank-shaft.sldprt |
115 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/pin.SLDPRT |
52 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/Set Screw.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/spider.sldprt |
67 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/Yoke_female.sldprt |
146 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson11/Exercises/U-Joint Changes/Yoke_male.sldprt |
153 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/bracket.sldprt |
71 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/bracket.sldprt |
74 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/crank sub.SLDASM |
420 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/crank-arm.sldprt |
76 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/crank-knob.sldprt |
294 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/crank-shaft.sldprt |
225 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/pin.sldprt |
69 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/base.sldprt |
74 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/HingePin.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/linkage.sldprt |
165 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/machine.sldasm |
1.2 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/mount.sldprt |
226 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/plates.sldprt |
420 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/wheel.sldprt |
953 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/spider.sldprt |
98 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/UJ_for_INT.SLDASM |
859 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/UJ_for_INT.SLDDRW |
95 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Yoke_female.sldprt |
215 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Built Parts/Yoke_male.sldprt |
223 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/crank sub.SLDASM |
419 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/crank-arm.sldprt |
67 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/crank-knob.sldprt |
286 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/crank-shaft.sldprt |
215 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/Base.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/Bevel Gears.SLDASM |
82 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/bevel3.SLDPRT |
159 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Base.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Clock.SLDASM |
191 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Face.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Inner Cog.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Minute Axle.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Outer cog.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Geneva Wheel.SLDASM |
76 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Input Disk.SLDPRT |
66 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Output Geneva wheel.SLDPRT |
110 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Actuating Lever.SLDPRT |
329 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam Wheel.SLDASM |
378 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam wheel.SLDPRT |
396 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam.SLDPRT |
60 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Limit Mechanism.SLDASM |
595 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Pivot.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Roller.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Nested Slides.SLDASM |
66 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide1.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide2.SLDPRT |
89 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide3.SLDPRT |
82 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Floor.SLDPRT |
40 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Rolling Balls.SLDASM |
160 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Sphere.SLDPRT |
154 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/pin.sldprt |
47 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/base.sldprt |
64 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/HingePin.SLDPRT |
46 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/linkage.sldprt |
115 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/machine.sldasm |
702 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/mount.sldprt |
160 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/plates.sldprt |
313 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Sarrus Mechanism/wheel.sldprt |
612 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/spider.sldprt |
93 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/UJ_for_INT.SLDASM |
667 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Yoke_female.sldprt |
169 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Case Study/Yoke_male.sldprt |
178 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/arm.SLDPRT |
138 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/base.SLDPRT |
209 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/collision.sldasm |
374 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/collision.SLDDRW |
53 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/handle sub-assy.sldasm |
179 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/handle-half.SLDPRT |
127 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/hold-down bolt.sldprt |
76 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/hold-down sub-assy.SLDASM |
128 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/link.SLDPRT |
113 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/sleeve.sldprt |
122 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Collision/washer.SLDPRT |
80 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Allen Wrench.SLDPRT |
502 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Base Sheet Metal.SLDPRT |
131 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Cover Plate.SLDPRT |
437 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Cover_Pl&Lug.SLDPRT |
229 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Gearbox Assembly.SLDASM |
1.2 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Gearbox Assembly.SLDDRW |
1.2 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Housing.SLDPRT |
433 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Offset Shaft.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/part configs.SLDASM |
360 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/part configs.SLDDRW |
339 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Pin.SLDPRT |
91 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Washer.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Worm Gear Shaft.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Worm Gear.SLDPRT |
491 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/arm.SLDPRT |
127 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/base.SLDPRT |
197 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/collision.sldasm |
390 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/handle sub-assy.sldasm |
178 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/handle-half.SLDPRT |
116 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/hold-down bolt.sldprt |
71 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/hold-down sub-assy.SLDASM |
128 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/link.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/sleeve.sldprt |
113 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Collision/washer.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Allen Wrench.SLDPRT |
500 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Base Sheet Metal.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Cover Plate.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Cover_Pl&Lug.SLDPRT |
170 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Gearbox Assembly.SLDASM |
1.1 MB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Housing.SLDPRT |
311 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Offset Shaft.SLDPRT |
74 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/part configs.SLDASM |
234 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Pin.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Washer.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Worm Gear Shaft.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD1/exercises/Lesson12/Exercises/Exploded Views/Worm Gear.SLDPRT |
277 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/4_View_C.drwdot |
289 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/A-Scale1to2.drwdot |
102 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/AltISO.prtdot |
34 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Assembly.asmdot |
19 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Assembly_IN.asmdot |
30 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Assembly_MM.asmdot |
30 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Drawing.drwdot |
21 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Part.prtdot |
24 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Part_IN.prtdot |
36 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Part_MM.prtdot |
36 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Training_Colors.sldclr |
5 KB |
| CD สอน SolidWorks/CD1/exercises/Training Templates/Weldment.prtdot |
39 KB |
| CD สอน SolidWorks/CD1/fscommand/tscc.exe |
191 KB |
| CD สอน SolidWorks/CD1/main.exe |
1.2 MB |
| CD สอน SolidWorks/CD1/movies/lesson1.avi |
19.5 MB |
| CD สอน SolidWorks/CD1/movies/lesson2.avi |
60.3 MB |
| CD สอน SolidWorks/CD1/movies/lesson3.avi |
55.2 MB |
| CD สอน SolidWorks/CD1/movies/lesson4.avi |
66 MB |
| CD สอน SolidWorks/CD1/movies/lesson5a.avi |
47.4 MB |
| CD สอน SolidWorks/CD1/movies/lesson5b.avi |
59.5 MB |
| CD สอน SolidWorks/CD1/movies/lesson6a.avi |
34.2 MB |
| CD สอน SolidWorks/CD1/movies/lesson6b.avi |
62.9 MB |
| CD สอน SolidWorks/CD1/movies/lesson6c.avi |
35.5 MB |
| CD สอน SolidWorks/CD1/movies/lesson6d.avi |
57.5 MB |
| CD สอน SolidWorks/CD1/sw.ico |
7 KB |
| CD สอน SolidWorks/CD2/autorun.inf |
37 B |
| CD สอน SolidWorks/CD2/exercises/Lesson01/Case Study/ADD DRAFT.sldprt |
189 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson01/Case Study/Bracket.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson01/Case Study/Design Intent 1.SLDPRT |
66 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson01/Case Study/Design Intent 2.SLDPRT |
63 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson01/Case Study/Design Intent 3.SLDPRT |
73 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson02/Case Study/Built Parts/Plate.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson02/Exercises/Built Parts/Sketching Horizontal and Vertical Lines.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson02/Exercises/Built Parts/Sketching Lines with Inferences.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson02/Exercises/Built Parts/Sketching Lines.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Case Study/Built Parts/Basic.SLDDRW |
192 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Case Study/Built Parts/Basic.SLDPRT |
215 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Case Study/GlassBox.SLDPRT |
282 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Basic-Changes.SLDPRT |
225 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Basic-Changes.SLDPRT |
207 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Bracket.SLDPRT |
112 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Gasket.SLDDRW |
136 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Gasket.SLDPRT |
128 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Plate.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Built Parts/Working with Fractions.SLDPRT |
131 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson03/Exercises/Gasket.SLDPRT |
134 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Case Study/Built Parts/Ratchet Body.SLDPRT |
819 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Built Parts/Base Bracket.SLDPRT |
151 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Built Parts/Guide.SLDPRT |
124 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Built Parts/Pulley.SLDPRT |
344 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Built Parts/Ratchet Handle Changes.SLDPRT |
397 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Built Parts/Tool Holder.SLDPRT |
405 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Pulley.SLDPRT |
76 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson04/Exercises/Ratchet Handle Changes.SLDPRT |
380 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Case Study/Built Parts/Symmetry_Sketching.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Case Study/Built Parts/Thin_Feature.SLDPRT |
182 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Case Study/Symmetry_Sketching.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Case Study/Thin_Feature.SLDPRT |
41 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Arm.SLDPRT |
322 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Full Rounds.SLDPRT |
881 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Guide.SLDPRT |
130 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Hook.SLDPRT |
181 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Idler Arm.SLDPRT |
402 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Mirror Body.SLDPRT |
493 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Built Parts/Wedge Block.SLDPRT |
78 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson05/Exercises/Mirror Body.SLDPRT |
87 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Add_Palette_Feature.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Add_Palette_Feature.SLDPRT |
171 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Circular_Pattern.SLDPRT |
285 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Grate.SLDPRT |
736 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Hex_Cut.SLDLFP |
83 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Library_Feature_Source.SLDPRT |
118 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Patterns_AddPF.SLDPRT |
171 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Patterns_CurveDriven.SLDPRT |
120 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Patterns_Curve_Driven.SLDPRT |
120 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/PowerBlock.SLDPRT |
114 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Table&Sketch_Driven.SLDPRT |
101 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Using Bodies in Patterns [PAD].SLDPRT |
135 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Using Faces in Patterns [PAD].SLDPRT |
188 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Using Faces in Patterns.SLDPRT |
188 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Using_Feature_Palette.SLDPRT |
181 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Built Parts/Vary_Sketch.SLDPRT |
276 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Circular_Pattern.SLDPRT |
231 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Grate.SLDPRT |
97 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Library_Feature_Source.SLDPRT |
112 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Patterns_AddPF.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Patterns_CurveDriven.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Patterns_Curve_Driven.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/PowerBlock.SLDPRT |
329 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Table&Sketch_Driven.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Using Bodies in Patterns [PAD].SLDPRT |
124 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Using Faces in Patterns [PAD].SLDPRT |
79 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Using Faces in Patterns.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Using_Feature_Palette.SLDPRT |
140 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Case Study/Vary_Sketch.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Base _LF.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/BoneWrench.SLDPRT |
218 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/BoneWrench.SLDPRT |
428 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Curve Driven Pattern.SLDPRT |
234 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Linear & Mirror.SLDPRT |
193 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Linear Pattern.SLDPRT |
205 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Lug.SLDLFP |
102 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Skipping Instances.SLDPRT |
467 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Table Driven Pattern[SKETCH].SLDPRT |
218 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Table Driven Pattern[TABLE].SLDPRT |
214 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Use_LF.SLDPRT |
283 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Built Parts/Vary Sketch Lab.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Curve Driven Pattern.SLDPRT |
96 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/HexCut.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Linear & Mirror.SLDPRT |
115 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Linear Pattern.SLDPRT |
108 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/pattern file.sldptab |
81 B |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/pattern file.txt |
81 B |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Table Driven Pattern.SLDPRT |
108 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Use_LF.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson06/Exercises/Vary Sketch Lab.SLDPRT |
95 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/Built Parts/Hand Wheel Assembly.SLDASM |
1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/Built Parts/Handle.SLDPRT |
150 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/Built Parts/Handwheel.SLDPRT |
1.4 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/Built Parts/Shaft.SLDPRT |
109 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/Built Parts/USER_MATERIALS.sldmat |
2 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Case Study/shaft.SLDPRT |
138 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Compression Plate.SLDPRT |
412 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Flange.SLDPRT |
145 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Hand Wheel Changes.SLDPRT |
606 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Pump Cover.SLDPRT |
260 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Tool Post.SLDPRT |
133 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Built Parts/Wheel.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Hand Wheel Changes.SLDPRT |
730 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson07/Exercises/Pump Cover.SLDPRT |
248 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Case Study/Built Parts/Shelling&Ribs.SLDPRT |
1.6 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Case Study/rib1.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Case Study/rib2.SLDPRT |
76 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Case Study/rib3.SLDPRT |
106 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Case Study/Shelling&Ribs.SLDPRT |
865 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Blow Dryer.SLDPRT |
720 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Ceiling Fan Ball.SLDPRT |
427 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Clevis.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Ice Cube Tray.SLDPRT |
1.5 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Motor Shield.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Built Parts/Pump Cover.SLDPRT |
476 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson08/Exercises/Ice Cube Tray.SLDPRT |
81 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/DesignTable.SLDPRT |
720 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/Part_DT.SLDDRW |
270 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/Part_DT.SLDPRT |
761 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/Part_DT.xls |
22 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/Ratchet Body.SLDPRT |
664 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Built Parts/Unistrut Design Table.xls |
14 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/DesignTable.SLDPRT |
280 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/FEA_config.sldprt |
196 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/OneFeature.SLDPRT |
118 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Part_DT.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Part_DT.xls |
16 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/PIN.SLDPRT |
40 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/Ratchet Body.SLDPRT |
425 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Case Study/swxJRNL.swj |
1 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Auto-Create.sldprt |
62 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Auto-Create.sldprt |
86 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/config part.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Design for Configs.SLDDRW |
118 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Design for Configs.SLDPRT |
238 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Design for Configs.xls |
28 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Linked.SLDPRT |
88 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/LinkedDT.xls |
10 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/PART DESIGN TABLE.sldprt |
343 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Built Parts/Speaker.SLDPRT |
1.1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/config part.SLDPRT |
219 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Design Table.xls |
14 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Linked.SLDPRT |
87 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Part Design Table.sldprt |
60 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson09/Exercises/Speaker.SLDPRT |
230 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Case Study/Built Parts/Editing CS.sldprt |
286 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Case Study/Built Parts/WorkingConfigs.SLDPRT |
211 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Case Study/Editing CS.sldprt |
108 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Case Study/Partial_Editing CS.SLDPRT |
182 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Case Study/WorkingConfigs.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/ADD DRAFT.sldprt |
190 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/ADD DRAFT.sldprt |
358 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Changes.SLDPRT |
258 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #1.SLDPRT |
77 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #2.SLDPRT |
81 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #3.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Contour Sketches #4.SLDPRT |
85 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/EDITING.sldprt |
100 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/ERRORS.SLDPRT |
242 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Exercise 7.SLDPRT |
63 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Handle Arm.SLDPRT |
158 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Oil Pump.SLDPRT |
126 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Built Parts/Working with Configurations.SLDPRT |
972 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Changes.SLDPRT |
143 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Contour Sketches #1.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Contour Sketches #2.SLDPRT |
52 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Contour Sketches #3.SLDPRT |
53 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Contour Sketches #4.SLDPRT |
53 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/EDITING.sldprt |
73 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/ERRORS.SLDPRT |
123 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Handle Arm.SLDPRT |
39 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Oil Pump.SLDPRT |
88 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson10/Exercises/Working with Configurations.SLDPRT |
139 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/bracket.sldprt |
63 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/bracket.sldprt |
71 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/crank sub.SLDASM |
419 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/crank-arm.sldprt |
67 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/crank-knob.sldprt |
286 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/crank-shaft.sldprt |
215 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/pin.sldprt |
47 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/spider.sldprt |
93 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/Universal Joint.SLDASM |
668 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/Yoke_female.sldprt |
169 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Built Parts/Yoke_male.sldprt |
178 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/crank-arm.sldprt |
63 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/crank-knob.sldprt |
282 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/crank-shaft.sldprt |
223 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/pin.sldprt |
45 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/spider.sldprt |
92 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Yoke_female.sldprt |
165 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Case Study/Yoke_male.sldprt |
174 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Basic Mates/Brace.SLDPRT |
46 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Basic Mates/EndConnect.SLDPRT |
47 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Basic Mates/RectBase.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Basic Mates/Basic Mates Assembly.SLDASM |
75 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Basic Mates/Brace.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Basic Mates/EndConnect.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Basic Mates/RectBase.SLDPRT |
68 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Cover Plate.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Cover_Pl&Lug.SLDPRT |
170 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Gearbox Assembly.SLDASM |
1.1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Housing.SLDPRT |
311 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Offset Shaft.SLDPRT |
74 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Worm Gear Shaft.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Gearbox Assy/Worm Gear.SLDPRT |
277 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Base.SLDPRT |
285 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Crank.SLDASM |
561 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Grinder Assy.SLDASM |
612 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Handle.SLDPRT |
96 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Knob.SLDPRT |
686 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/RH Machine Screw.SLDPRT |
349 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Slider.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Grinder Assy/Truss Head Screw.SLDPRT |
304 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Allen Wrench.SLDPRT |
500 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Base Sheet Metal.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/part configs.SLDASM |
234 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Pin.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/Part DT in Assy/Washer.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/bracket.sldprt |
73 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Changes.SLDASM |
558 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-arm.sldprt |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-assy.sldasm |
171 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-knob.sldprt |
119 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/crank-shaft.sldprt |
125 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/pin.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Set Screw.SLDPRT |
64 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/spider.sldprt |
75 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Yoke_female.sldprt |
157 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Built Parts/U-Joint Changes/Yoke_male.sldprt |
165 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Cover Plate.SLDPRT |
279 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Cover_Pl&Lug.SLDPRT |
156 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Housing.SLDPRT |
289 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Offset Shaft.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Worm Gear Shaft.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Gearbox Assy/Worm Gear.SLDPRT |
265 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/Base.SLDPRT |
259 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/Handle.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/Knob.SLDPRT |
276 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/RH Machine Screw.SLDPRT |
216 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/Slider.SLDPRT |
58 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Grinder Assy/Truss Head Screw.SLDPRT |
133 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Part DT in Assy/Allen Wrench.SLDPRT |
294 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Part DT in Assy/Base Sheet Metal.SLDPRT |
110 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Part DT in Assy/part configs.SLDASM |
146 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Part DT in Assy/Pin.SLDPRT |
62 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/Part DT in Assy/Washer.SLDPRT |
43 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/bracket.sldprt |
63 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/Changes.SLDASM |
338 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/crank-arm.sldprt |
60 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/crank-assy.sldasm |
166 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/crank-knob.sldprt |
111 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/crank-shaft.sldprt |
115 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/pin.SLDPRT |
52 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/Set Screw.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/spider.sldprt |
67 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/Yoke_female.sldprt |
146 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson11/Exercises/U-Joint Changes/Yoke_male.sldprt |
153 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/bracket.sldprt |
101 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/bracket.sldprt |
74 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/crank sub.SLDASM |
420 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/crank-arm.sldprt |
76 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/crank-knob.sldprt |
294 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/crank-shaft.sldprt |
225 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/pin.sldprt |
69 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/base.sldprt |
74 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/HingePin.SLDPRT |
56 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/linkage.sldprt |
165 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/machine.sldasm |
1.2 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/mount.sldprt |
226 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/plates.sldprt |
420 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Sarrus Mechanism/wheel.sldprt |
953 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/spider.sldprt |
98 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/UJ_for_INT.SLDASM |
859 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/UJ_for_INT.SLDDRW |
95 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Yoke_female.sldprt |
215 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Built Parts/Yoke_male.sldprt |
223 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/crank sub.SLDASM |
419 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/crank-arm.sldprt |
67 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/crank-knob.sldprt |
286 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/crank-shaft.sldprt |
215 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/Base.SLDPRT |
49 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/Bevel Gears.SLDASM |
82 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Bevel Gears/bevel3.SLDPRT |
159 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Base.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Clock.SLDASM |
191 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Face.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Inner Cog.SLDPRT |
100 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Minute Axle.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Clock/Outer cog.SLDPRT |
306 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Geneva Wheel.SLDASM |
76 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Input Disk.SLDPRT |
66 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Geneva Wheel/Output Geneva wheel.SLDPRT |
110 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Actuating Lever.SLDPRT |
329 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam Wheel.SLDASM |
378 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam wheel.SLDPRT |
396 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Cam.SLDPRT |
60 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Limit Mechanism.SLDASM |
595 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Pivot.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Limit Mechanism/Roller.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Nested Slides.SLDASM |
66 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide1.SLDPRT |
54 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide2.SLDPRT |
89 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Nested Slides/Slide3.SLDPRT |
82 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Floor.SLDPRT |
40 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Rolling Balls.SLDASM |
160 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Physical Dynamics/Rolling Balls/Sphere.SLDPRT |
154 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/pin.sldprt |
177 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/base.sldprt |
64 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/HingePin.SLDPRT |
46 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/linkage.sldprt |
115 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/machine.sldasm |
702 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/mount.sldprt |
160 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/plates.sldprt |
313 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Sarrus Mechanism/wheel.sldprt |
612 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/spider.sldprt |
124 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/UJ_for_INT.SLDASM |
667 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Yoke_female.sldprt |
205 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Case Study/Yoke_male.sldprt |
216 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/arm.SLDPRT |
138 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/base.SLDPRT |
209 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/collision.sldasm |
374 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/collision.SLDDRW |
53 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/handle sub-assy.sldasm |
179 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/handle-half.SLDPRT |
127 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/hold-down bolt.sldprt |
76 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/hold-down sub-assy.SLDASM |
128 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/link.SLDPRT |
113 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/sleeve.sldprt |
122 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Collision/washer.SLDPRT |
80 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Allen Wrench.SLDPRT |
502 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Base Sheet Metal.SLDPRT |
131 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Cover Plate.SLDPRT |
437 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Cover_Pl&Lug.SLDPRT |
229 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Gearbox Assembly.SLDASM |
1.2 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Gearbox Assembly.SLDDRW |
1.2 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Housing.SLDPRT |
433 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Offset Shaft.SLDPRT |
79 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/part configs.SLDASM |
360 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/part configs.SLDDRW |
339 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Pin.SLDPRT |
91 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Washer.SLDPRT |
55 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Worm Gear Shaft.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Built Parts/Exploded Views/Worm Gear.SLDPRT |
491 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/arm.SLDPRT |
127 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/base.SLDPRT |
197 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/collision.sldasm |
390 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/handle sub-assy.sldasm |
178 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/handle-half.SLDPRT |
116 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/hold-down bolt.sldprt |
71 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/hold-down sub-assy.SLDASM |
128 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/link.SLDPRT |
104 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/sleeve.sldprt |
113 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Collision/washer.SLDPRT |
72 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Allen Wrench.SLDPRT |
500 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Base Sheet Metal.SLDPRT |
121 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Cover Plate.SLDPRT |
298 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Cover_Pl&Lug.SLDPRT |
170 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Gearbox Assembly.SLDASM |
1.1 MB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Housing.SLDPRT |
311 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Offset Shaft.SLDPRT |
74 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/part configs.SLDASM |
234 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Pin.SLDPRT |
70 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Washer.SLDPRT |
51 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Worm Gear Shaft.SLDPRT |
69 KB |
| CD สอน SolidWorks/CD2/exercises/Lesson12/Exercises/Exploded Views/Worm Gear.SLDPRT |
277 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/4_View_C.drwdot |
289 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/A-Scale1to2.drwdot |
102 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/AltISO.prtdot |
34 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Assembly.asmdot |
19 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Assembly_IN.asmdot |
30 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Assembly_MM.asmdot |
30 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Drawing.drwdot |
21 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Part.prtdot |
24 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Part_IN.prtdot |
36 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Part_MM.prtdot |
36 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Training_Colors.sldclr |
5 KB |
| CD สอน SolidWorks/CD2/exercises/Training Templates/Weldment.prtdot |
39 KB |
| CD สอน SolidWorks/CD2/fscommand/tscc.exe |
191 KB |
| CD สอน SolidWorks/CD2/main.exe |
1.2 MB |
| CD สอน SolidWorks/CD2/movies/lesson10.avi |
75.3 MB |
| CD สอน SolidWorks/CD2/movies/lesson11.avi |
89.3 MB |
| CD สอน SolidWorks/CD2/movies/lesson12.avi |
74.7 MB |
| CD สอน SolidWorks/CD2/movies/lesson7a.avi |
102.7 MB |
| CD สอน SolidWorks/CD2/movies/lesson7b.avi |
47.3 MB |
| CD สอน SolidWorks/CD2/movies/lesson8.avi |
74.3 MB |
| CD สอน SolidWorks/CD2/movies/lesson9.avi |
75.2 MB |
| CD สอน SolidWorks/CD2/sw.ico |
7 KB |
Magnet link
