| Pluralsight - Getting Started with Inventor Surface Modeling/16 - Working with the Shape of the Solid Body.mp4 |
19.9 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/15 - Importing and Aligning a Solid Body into the Design.mp4 |
19.8 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/14 - Repairing Surfaces Using a Loft and Stitch.mp4 |
23.6 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/13 - Importing and Repairing Imported Surfaces.mp4 |
15.7 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/17 - Tweaking the Curve and Adding More Geometry.mp4 |
28.6 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/18 - Recreating the Solid Geometry Using Surfaces.mp4 |
26 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/inventor-surface-modeling-getting-started.zip |
9.4 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/21 - Conclusion.mp4 |
19.9 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/20 - Inspecting the Final Surface.mp4 |
22.9 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/19 - Mirroring the Surface and Filling in the LCD.mp4 |
25.8 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/12 - Coiled Surfaces.mp4 |
13.7 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/11 - The Sculpt Tool with Surfaces.mp4 |
10.4 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/05 - Surface Extrude.mp4 |
16.7 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/04 - Practical Applications for Surfaces.mp4 |
10.8 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/03 - Working with Surfaces.mp4 |
6.5 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/02 - Solid vs. Surface.mp4 |
17 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/06 - Surface Revolve.mp4 |
17.9 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/07 - Lofted Surface, Patched Surface, and Joining the Two.mp4 |
12.6 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/10 - Converting Surfaces to Solids and Replace Face.mp4 |
13.9 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/09 - Swept Surfaces and Ruled Surfaces.mp4 |
19.4 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/08 - Lofted Surfaces Using Splines.mp4 |
20.6 MB |
| Pluralsight - Getting Started with Inventor Surface Modeling/01 - Course Overview.mp4 |
2.9 MB |
Magnet link
